Secure this TV mount to the wall in your RV for flexible viewing angles so you can enjoy family movie night. Even if your TV is crammed in a corner, you can still swing it away from the wall and swivel it up to 350 degrees toward the couch.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this RV TV wall mount with swivel, tilt and extension. Now this mount will secure your RV's flat screen TV to an inside wall. It is designed to be used with TVs up to 42 inches. Has a maximum load capacity of 25 pounds. Now this is a full motion mounting plate and articulating arm.
It'll swing 180 degrees away from the wall. And then the arm and the swivel will allow for 350 degree positioning so it's easier to see the screen from anywhere in your RV. Does use a locking pin here, which when you do close it, it prevents the mount from moving around while you're traveling to your campsite. Basically, it'll hold this arm to the wall mount with the screen parallel to the wall. So basically you can see, there's the pin right in there.
So if you go and push this back down, and then all you have to do is push it in and it'll lock into place just like that. And when it's installed like this, the profile from the wall to the TV is about two and 7/8 inches. And again, it is a spring loaded pin, which if you pull it down, you can see the chain that hangs here, pull down on it, that'll release it. And then you just push out, and then you can swivel it or articulate however for where you need it. And also, the plate right here that mounts to your TV does have a tilting feature.
You can see how it tilts. Basically, this will allow you to position the screen at the perfect angle for viewing or reducing glare. These two knobs right here, if you loosen them, it'll allow it to tilt upward 10 degrees, downward 12 degrees. And these plate locking knobs will prevent the screen movement while you're traveling. Now the aluminum wall mount and the arm, and then the steel plate here, is for mounting to the TV.
It is a bolt on installation. Comes with the included mounting hardware, mounting instructions. Some drilling is required. But again, to go to close this, you just push it up against the pin right there, make sure it's flat, and it'll lock it into place and then it won't move anywhere. And then again, to release it, you have this spring loaded pin. You just pull down on it and then push your TV away and it releases it. (mount clicking) Now the TV mounting plate, you can see all the holes in it, so it does fit many different VESA mounting patterns on your TV. It'll fit the 50 millimeter by 50 millimeter, 75 by 75, 100 by 100, 100 by 200, and even 200 by 200. So it fits a pretty wide range of the VESA mounting patterns. And again, the full arm extension, if you release it, you can extend this out all the way about 25 inches fully extended. And then you can swivel it 180 degrees. And again, when you to close it, just line it up, (lock clicking) push it in, and it locks into place. But that should do it for a look at this RV TV wall mount with swivel, tilt and extension.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.