Rubber Flexible Edge Trim for RVs - Stick On - 10' Long x 1-1/2" Tall

Video Transcript for Feature Review Rubber Flexible Edge Trim for RVs

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a brief look at this Rubber Flexible Edge Trim for RVs. When you apply this flexible edge trim, you are going to be able to prevent leaks, gaps, and vibrations around your RV. This is a peel-and-stick installation with the pre-applied 3M adhesive backing as you see here, and you just simply remove the backing and apply the seal to your frame. The skirting around the adhesive, I don't know if you're gonna be able to see that, but there's a little bit of a skirting here that is on either side of the backing here, that is going to protect the connection from the elements, so that's a nice added touch to this particular piece of trim. Now, surface preparation is recommended to remove any old adhesive, and then you would just simply use your scissors to trim the extra seal that you do not need. This is made in the USA of EPDM dense rubber that won't shrink, crack, or fade over time, it does feel very durable, and I believe it's gonna be long lasting, it's also resistant to UV damage, and this strip here is gonna be 10 feet long.

And let me pull out my ruler here to provide you some other smaller measurements that you might find helpful. Looking at the width, we're sitting right at about 9/16 of an inch, and then looking at the height, we're sitting right at about an inch, about an inch and a half it looks like. This does come with a small instruction card to help you through the installation process. And that is going to conclude our look today, I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me..