Camco Replacement Lid for Ventline and Elixir RV Roof Vents - Polypropylene - Smoke

Ask the Experts about this Camco RV Vents and Fans

Bathroom Vent Cover ...

Will Roof Vent Lid f...

Will Roof Vent Lid F...

How to Determine Whi...

Replacement Vent Lid...

Replacement Lid for ...

Replacment Vent Cove...

Replacement Covers f...

Replacement Roof Ven...

Recommended Replacem...

• Bathroom Vent Cover Replacement For Elixir Vent Model S545A3
  Replacement vent cover # CAM40148 should be correct since it fits Elixir vents made after 1994. Take a look at the video I have linked on this cover. Make sure the hinge style matches your old covers.
  view full answer...
  
• Will Roof Vent Lid for Elixir and Ventline Vents Fit on a 1998 Tahoe Lite Trailer
  The replacement vent lid, part # CAM40148, is designed to fit Elixir roof vents made after 1994 and Ventline vents made before 2008. It is however, a standard 14 by 14 inch vent lid so it will likely still fit your Tahoe trailer. Other than the size you also want to verify it has the correct hinge type you need. It uses a continuous hinge that is a metal "J" shaped strip along one edge. I've attached a picture that shows the different types of hinges available for you to compare yours to.
  view full answer...
  
• Will Roof Vent Lid Fit Vent on an Enclosed Cargo Trailer
  Since you measured your vent's opening at 13-1/4 by 13-1/4 inches the replacement lid, part # CAM40148, will likely fit. It's a 14 by 14 inch lid which is a very standard size on trailers. The other thing you need to pay attention to is the style of the hinge on your vent. This lid uses a continuous hinge that is a strip of "J" hooked metal that runs along one side. I've attached a picture that shows the different styles of hinges you may have. The lid you choose needs to match the...
  view full answer...
  
• Year of Ventline and Elixir Roof Vent the Camco Replacement Lid Fits
  The Replacement Lid for Ventline and Elixir RV Roof Vents # CAM40148 fits pre-2008 Ventline and post-1994 Elixir vents. I have added a link to a video review of this replacement vent lid for you to take a look at.
  view full answer...
• Size Vent the Replacement Lid for Ventline and Elixir RV Roof Vents Fits
  The Replacement Lid for Ventline and Elixir RV Roof Vents # CAM40148 will not fit 13" x 13" vents. It is designed for specific 14" x 14" vents from Ventline and Elixir. I've added a link to a video review of this product for you to take a look at.
  view full answer...
• How to Determine Which Roof Vent Lid Will Fit a 1985 Fleetwood Prowler
  If the vent on your trailer is original and it's either an Elixir or a Ventline then part # CAM40148 will work for you. You can also measure to make sure you vent is a standard 14-1/4 by 14-1/4 roof vent. You also need to make sure yours uses the same continous metal hinge that the lid has. I've attached a picture that shows the different types of hinges you may have. I've also attached a link to all of our roof vent lids in case this one isn't what you need.
  view full answer...
  
• What Color is the Replacement Lid for Ventline and Elixir RV Roof Vents?
  The color of the Replacement Lid for Ventline and Elixir RV Roof Vents # CAM40148 is actually smoke so yes, it does come in smoke color. For visual verification please take a look at the video I've linked for you.
  view full answer...
• Replacement Vent Lid with Metal Slider on Underside to Raise and Lower
  The Replacement Lid for Ventline and Elixir RV Roof Vents # CAM40148 does have the metal track for the raising and lowering of the vent lid. It also has a metal continuous hinge for you to simply slide onto the pin and then crimp the ends for a secure fit. I've attached a photo and a video to assist.
  view full answer...
  
• Replacement Lid for Older Ventline RV Roof Vent
  The Replacement Lid for RV Roof Vents # CAM40148 referenced in your question is designed to replace the lid on Ventline vents manufactured before 2008, so this might very well be the correct lid. In order to be sure this will work, I recommend taking a quick measurement on your existing vent, as this lid is designed to fit 14 inch x 14 inch vents. Also take a look at the hinge style on your unit. If it features the same continuous metal hinge like what is on this lid, then it will work...
  view full answer...
  
• Do Mounting Brackets Come With Replacement Lid for Ventline and Elixir RV Roof Vents
  Yes, the Replacement Lid for Ventline and Elixir RV Roof Vents # CAM40148 does come with the mounting brackets, which are rust-resistant. This lid fits 14" x 14" pre-2008 Ventline and post-1994 Elixir roof vents. I've added a link to a video review of this part for you to take a look at as well.
  view full answer...
• Replacment Vent Cover with 3 Point Hinge
  You're right. The # CAM40148 has a continuous hinge, where the hinge on your vent cover is a 3 point hinge- so it won't work as an option to replace your hinge. You'll want to use a 3 point hinge like the Replacement Cover # CAM40153 to replace the cover that is on your Elixir # S545A3 fan assembly. This is a white domed vent cover that fits over the 14" x 14" opening over your vent fan. I've linked the other 3 point hinge vent covers to this answer for you to have a look at if you're...
  view full answer...
  
• Replacement Covers for 2008 Coachman with Elixir Vent
  Camco offers replacement covers for Elixir roof vents. These covers are for the Elixir 1994 model and newer, measure 14 inches by 14 inches, and come in two colors. Part # CAM40155 for the white cover and part # CAM40148 for the smoke colored cover. I recommend that you compare the hinge on your current roof vent cover to the one in the picture that I have attached just to make sure that we have a match. I have attached a couple of videos for you to check out.
  view full answer...
  
• Replacement Trailer Roof Vent Cover for Elixir Roof Vent
  Since we know you have an Elixir roof vent the correct covers are part # CAM40155 for white or part # CAM40148 for smoke colored.
  view full answer...
• Replacement Trailer Roof Vent Cover for an Elixir Vent Made in 2002
  Replacement vent cover # CAM40148 should be correct since it fits Elixir vents made after 1994. Take a look at the video I have linked on this cover. Make sure the hinge style matches your old covers. It is also available in white, # CAM40155 or # CAM40161.
  view full answer...
• Recommended Replacement Lid for Elixir Roof Vent on 2016 Lightning Car Hauler
  Your best bet in identifying the vent would be to find a part number or other information printed on or attached to the vent itself. Based on what the manufacturer said I would take a look at the Elixir roof vent replacement lids and see if they match what you currently have. We have a few different options and colors available. The Replacement Lid for Ventline and Elixir RV Roof Vents - Polypropylene - White # CAM40155 and the same in Smoke # CAM40148 are your best bet. These measure...
  view full answer...
• Do Replacement Vent Lids # BBC-0530-04 and # CAM40148 Fit Same Roof Vents
  While the hinge style of the Replacement Lid for Ventline # BBC-0530-04 and the # CAM40148 is basically the same the corners of the lids are different. One is square and the other is round. You'd need to check out what your current lid has and go with the one that matches the best.
  view full answer...
• Replacement Roof Vent Lid for 2017 Forest River Rockwood A213HW Folding Pop-Up Camper Trailer
  The Rockwood High Wall folding camper trailer model A213HW appears to use a standard 14 x 14 roof vent with a smoke-color lid like the models offered from Ventline and others. All you need to do to select a replacement lid is check the nature of the hinge on your original one. Several types of vent hinge are in common use and the linked photo will help you confirm which you have on your Rockwood. Once you confirm that simply click on the filter on the linked page to choose that hinge type...
  view full answer...
  
• Recommended Replacement 14" x 14" Continuous Hinge Roof Vent Cover for 40 Year-Old Trailer
  From the picture that you sent in it looks like your vent cover has a continuous hinge. If that is the case then you just need to confirm that it measures 14" x 14". If it does meet those requirements then the Replacement Lid for Elixir RV Roof Vent # CAM40156 will fit! You could also use the metal Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent # BV0534-00 or the Smoke Replacement Lid for Ventline and Elixir RV Roof Vents # CAM40148 as well depending on what you are...
  view full answer...
  
• Replacement Vent Cover for Cargo Area on Featherlite Trailer Model # 9406
  In order to determine if we have a replacement cover that will fit your trailer vent you will need to look at the hinge style of the old cover and also it's measurements. I have attached a picture to illustrate the different types of hinges. I have also included a link to all of our replacement vent covers. You can use the filters on the page to narrow the search. For example, if your current cover has a continuous hinge (kind of C-shape) and measures 14 inches x 14 inches, you could...
  view full answer...
  
• Replacement Vent Cover for 2008 American Hauler Night Hawk Cargo Trailer
  In order to determine if we have a replacement cover that will fit your trailer vent you will need to look at the hinge style of the old cover and also it's measurements. I have attached a picture to illustrate the different types of hinges. I have also included a link to all of our replacement vent covers. You can use the filters on the page to narrow the search. For example, if your current cover has a continuous hinge (kind of C-shape) and measures 14 inches x 14 inches, you could...
  view full answer...
  
• Replacement Roof Vent Lid for 1991 Wilderness Yukon 18-ft Travel Trailer
  No worries. We carry trailer roof vent replacement lids and lots of other vent parts so we can get you squared away before the spring thaw. Most square trailer roof vents are 14 x 14-inch and the main thing to note on your original vent lid is the nature of the hinge on it. The photo I linked shows you the four basic types. Many vents use the continuous metal hinge type like Ventline lid # BV0534-00 which is a flat metal lid. I mention this specific metal one as an example since you could...
  view full answer...
  
• Replacement Fan Blades For Elixir S545A3
  Most of the Elixir motors have a D shaped shaft that the fan blade fits onto which is an outdated style. We do not have any replacement fan blades that fit the D shaped shaft of the motor and from my research they can be hard to get a hold of. One option is to replace the motor with part # BVD0218-00 and then use a new 6 inch fan blade part # BVC0466. I recommend to just replace the Elixir Vent with an updated Fan-Tastic Vent part # FV800601 because the parts will be easier to replace...
  view full answer...
  
• Replacement Roof Vent Lid for a 1997 Rockwood Pop-Up Camper
  Thanks for the photo. Although you do have four points of contact with the hinge, the spacing and size of these contacts does not appear to match that of the options we have. Therefore, I will need you to pull the screen off of the inside of the vent assembly and then look for either a model or serial number. If you can provide this I can then check to see what the correct replacement lid is (if available). If you cannot find the model or serial number then your best option is a universal...
  view full answer...
  
• Replacement Vent Lid for Ventline with Metal Continuous Hinge
  Thank you for the photo; it definitely makes it easier for us to identify the correct replacement parts! Since you've got a continuous hinge on your lid, the # BV0554-01 will work for you; if you're looking for a dark colored replacement like your old one, the # BV0554-03 or # CAM40148 will work for you as well.
  view full answer...

Do you have a question about this RV Vents and Fan?