Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the lid for your MaxxFan or MaxxFan Plus roof vent (MA00A04401K or MA00-04500K). Smoke-colored dome is constructed of high-density polypropylene.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com. And today, we're gonna take a quick look at this replacement lid for the MaxxFan and MaxxFan Plus roof vents. If you're needing to replace the lid for your MaxxFan or MaxxFan Plus roof vent, then this is gonna be the lid that you need. Specifically, this lid fits model numbers MA00A04401K or MA00-04500K. As you can see, this is a smoke colored lid, so it is going to do a great job at filtering UV rays while still allowing light in.
This is constructed of a high-density polypropylene, so it's very durable. And the overall measurements, and these measurements are going to be square, we're gonna be sitting right at almost 15 inches. I'm gonna say it's about 14 13/16 inches square. And since this lid is the replacement from MaxxAir, you can trust that it is going to fit your MaxxFan or MaxxFan Plus roof vents. Well, that's gonna conclude our look today.
I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Average Customer Rating: 4.9 out of 5 stars (78 Customer Reviews)
Replaces the lid for your MaxxFan or MaxxFan Plus roof vent (MA00A04401K or MA00-04500K). Smoke-colored dome is constructed of high-density polypropylene.Plastic is thinner than the factory maxxair fan, the rear hinge points are also not as strong nor are they the same size "smaller " so this vent cover will probably last even less time than the three years I got out of the original. I would recommend just replacing the cover with an actual maxxair cover if you can find it.
Lids fit perfectly on my original 14"x14" MaxxFan vents. Needed to replace all three due to golf ball sized hail damage. They were easy to install using original hardware and were an exact replacement for the Maxxair smoke lid #10A40009K. Installed all 3 in less than an hour. The lids were reasonably priced and shipped promptly. Etrailer was very helpful and easy to deal with. I will order again from Etrailer if needed.
Parts arrived on time and as they said in the beginning. Replaced parts and all went as expected. Will use etrailer in the future. Thanks for your fine service and follow up.
Perfect fit. The only thing that is that the hing was not available. My was lost when the lid was damaged. I used a piece of copper wire and it is working OK.
David
11/4/2024
Still working great.
The Maxxfan replacement lid fit perfectly and was easy to install! A few screws and the hinge pin went on easily. Only took about 30 minutes start to finish. The easiest thing was ordering from Natalie at etrailer, who researched the item to ensure it was the correct one for my fan.
Thanks Natalie!
While the removal and installation was simple for me, I think instructions and list of tools needed would be helpful for someone not mechanically inclined. The product itself was great and worked without issue.
exact replacement, thanks for the additional tip on installation by the etrailer person
The vent covers arrived just 2 days after I ordered them. They look great, and installed very easily.
It was easy to install. Looks great! Fits great! Great price.
Great replacement, easy install.
Very good service from etrailer.com helping me to get this manufacturer’s part for the second time. The ‘universal’ lid covers just don’t work for me. This part is super easy to swap in with no adaptations.
It was an exact fit. A hail storm had broke the other cover so this replacement was perfect. Quick delivery and packaged well.
This is an exact replacement lid for my remote operated bathroom vent. Happy that they had it, saved me from buying a whole new vent.
Perfect fit and easy to switch out.
Excellent communication with the people at etrailer..Good delivery. Will use etrailer for all my rv needs in the future.
Glin
3/10/2023
great
Installed on my Max Fan, easy install and fits great. Removed white cover and install smoke. Now everything on roof matches. Great service from E-Trailer!
Robert W.
9/20/2020
These still work great. Highly recommend for venting or to help cool. When its cool out just open a window or two and turn on one or two. I have three and would purchase again.
came FAST and exactly what I needed
It was Great Followed up with order till delivery was complete. Thanks for all the help
Old cover was very crazed. New cover was very easy to install and the prompt service and shipping was extremely appreciated!
Easy installation. Direct replacement for original. Smoked cover cuts down on the heat and sun glare. No problems after 1 year in use.
Perfect fit, arrived quickly.
Great fit. Runs great
They were really efficient and the product was an exact fit!!
I will install in the spring because camper is In storage. It looks like the right one.
Thanks,
Arrived in a timely manner and fit perf ectly
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mark
5/20/2024
The parts arrived as ordered. They fit as expected and there’s been no problems with them. I would recommend the product to anyone. The entire process went great.