bing tracking image
  1. RV Vents and Fans
  2. Polar Hardware
  3. Vent
  4. Wall Vent
  5. No Fan
  6. Silver
Exterior Wall Vent for Enclosed Trailers - Aluminum - 12-1/4" x 10-1/2"

Exterior Wall Vent for Enclosed Trailers - Aluminum - 12-1/4" x 10-1/2"

Item # PLR20
Our Price: $27.96
RV Vents and Fans
Shipping Weight: 1.26 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Vent allows air to circulate in and out of your enclosed trailer. Easily open and close with the sliding lever to adjust the airflow. Aluminum construction is durable, lightweight, and corrosion resistant. Great Prices for the best rv vents and fans from Polar Hardware. Exterior Wall Vent for Enclosed Trailers - Aluminum - 12-1/4" x 10-1/2" part number PLR20 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (73)
  • Q & A (0)
  • Photos

Polar Hardware RV Vents and Fans - PLR20

  • Vent
  • Wall Vent
  • No Fan
  • Silver
  • Polar Hardware
  • Metal

Vent allows air to circulate in and out of your enclosed trailer. Easily open and close with the sliding lever to adjust the airflow. Aluminum construction is durable, lightweight, and corrosion resistant.


Features:

  • Vent allows air to circulate in and out of your enclosed trailer
  • Easy to open - just slide the lever to open and close vent
  • Louvres direct airflow up or down depending on how the vent is mounted
  • (4) 2" Holes in rear of unit allow air in and out
  • Durable, rustproof aluminum front and back plates
    • Insert is constructed of corrosion-resistant zinc-plated steel


Specs:

  • Overall dimensions: 12-1/4" long x 10-1/2" wide
    • 2-7/8" Between mounting holes on top (center to center)
    • 3" Between mounting holes on sides (center to center)
  • Ventilation hole diameter: 2"
  • Mounting hole diameter: 7/32"


Dimensions


20 Polar Hardware Multi-Purpose Trailer Ventilator - Aluminum





Customer Satisfaction Score:


Customer Reviews

Exterior Wall Vent for Enclosed Trailers - Aluminum - 12-1/4" x 10-1/2" - PLR20

Average Customer Rating:  4.8 out of 5 stars   (73 Customer Reviews)

Vent allows air to circulate in and out of your enclosed trailer. Easily open and close with the sliding lever to adjust the airflow. Aluminum construction is durable, lightweight, and corrosion resistant.

by:

They look great. Well built, and etrailer is an excellent company. They shipped fast, packaging was good, and communication with the company by phone and email could not have been better.



by:

Thank you for your prompt followup on my damaged merchandise. The replacement was great. Thanks for your good service, that says a lot about your company and will go a long way.



by:

Very good service, liked the way the tracking status works. Very nice people to work with. Prompt in every way. The vent with closer system was exactly what I needed . Thank's to all involved. Great service and product!!



by:

I bought 2 vent to install on my horse trailer. It was easy to install and it work good for my horse. I will be ordering more parts for my trailer soon.



by:

fast delivery, great price



by:

Added this vent to a cook trailer. It works great!



by:

Great product. Used it in a trailer designed for poultry and it worked great.



by:

Fast shipping



by:

Looks great as a refrigerator vent on our '53 Airstream Flying Cloud. The aluminum is thin, but seems quality. I like that it has the option to open and close the vents. Just what we were looking for. Good service.



by:

Great communication and fast service



by:

Solid quality vent not thin and flimsy like some others out there.



by:

Easy ordering, quick delivery, great se rvice.



by:

This vent worked well to add ventilation to my aluminum dog box. I added two on the end; one for each compartment. The slide is very smooth and I plan to connect the two so I can open both from either side of my truck. Only thing that would make it better is if it had a template for the vent hole locations.



by:

Good product and grate service. Thank y ou



by:

Easy install fast shipping highly recommend



by:

Very nice aluminum trailer wall vent; fairly priced, quick delivery and best of all -- Made in USA...
Thanks, kim



by:

Prompt delivery, good quality at fair price, can’t do better than that



by:

Good quality products, quick delivery t hx.



by:

I needed a cap after my tailgate slammed down on mine and broke mine, and cracked my plastic tail gate trim..ordered that too.. But anyway this installed in seconds! I picked out the broken pieces and popped this in w the help of a small hammer ..so easy and I had a strained shoulder when I did it, super fast. Shipping was VERY QUICK And COMMUNICATION was excellent!



by:

Used these to vent a chicken coop I built. When I worked in a trailer sales and service dept we used these to vent reefer trailers so I thought work on my coop. easy to order and fast shipping, good product.



by:

Well made, looks good, great price, brushed aluminum blends well on trailer. Needed to vent storage boxes on trailer from sweat and fumes, works great. Most excellent service thanks to Greg.



by:

We used this to cover a small hole in the rock guard on the front of our trailer rather than replace the whole thing. Now we have extra ventilation too. Just have to remember to keep it closed on wet roads!



by:

I added this to the door of my cargo trailer, works great.



by:

Excellent vent for my covered utility trailer. Easy to install. Exterior finish is holding up well. Definitely recommend this supplier.
jw



by:

All is in perfect condition


25
73
Show More Reviews

See what our Experts say about this Polar Hardware RV Vents and Fans

  • Does the Multi-Purpose Ventilator # PLR20 Come with Mounting Hardware
    Multi-Purpose Ventilator # PLR20 does not come with hardware and there isn't a specific hardware kit for it. The reason for this is that it can be installed on pretty much anything which means the mounting surfaces can be made of different materials (wood, aluminum, steel, fiberglass). So rather than include hardware for all of those applications no hardware is included so you can select hardware that best fits your needs and matches what the surface material would require.
    view full answer...
  • Can The Polar Vent For Enclosed Trailers # PLR20 Be Painted
    The Vent for Enclosed Trailers # PLR20 is zinc plated aluminum so you would need to pretreat the vent to remove the zinc coating to prevent the paint from peeling off as the zinc reacts with the paint's binder.
    view full answer...
  • Where to Cut 4 Vent Holes for Vent for Enclosed Trailers # PLR20
    To line up where to cut the holes for when installing the Vent for Enclosed Trailers # PLR20 you'd want to drill pilot holes in the surface that go all the way through so that you can line up where the vent will be on the inside of the wall and then from there mark through the holes with the vent open to give you an idea where to trim.
    view full answer...
  • How Many Polar Vents Should be Used for 24' Enclosed Trailer in Southwest Florida
    Since you have a 24' trailer and are located in Southwest Florida you'll probably want at least 4 of the Polar Vent for Enclosed Trailers # PLR20; 2 at the top front corner of the trailer and the other 2 at the bottom corner on the opposite sides of the trailer. This will help to provide the most airflow, especially when you're traveling down the road. If you plan on leaving these vents open most of the time to help get rid of heat then I'd also install some type of mesh to help manage...
    view full answer...
  • How Many Side Vents Should Element SE Cargo Trailer Have Added
    I would use two of the side vents part # PLR20 on either side of the trailer close to the middle so that it can vent the trailer equally front to back.
    view full answer...
  • How Tight is Seal of Vent for Enclosed Trailers # PLR20
    When the Vent for Enclosed Trailers # PLR20 is closed and air is blowing from outside to in there would be a very minimal amount of air that passes through. It wouldn't be a noticeable amount but it's not an air tight seal. There would not be noticeable wind noise though.
    view full answer...
  • Recommended Trailer Vent and Fan for Outside Air in Parked Trailer
    The Vent for Enclosed Trailers - Aluminum - 12-1/4" Wide x 10-1/2" Tall # PLR20 will allow outside air to flow but there is no cubic foot per minute rating as that would require a fan or direct wind for a vehicle sitting still. The fan you use will dictate that and the air flow of that fan will be lower than the rating because only four 2 inch diameter holes will draw air. I recommend the Flex-a-lite 12" Trimline Reversible Electric Radiator Fan - 12V - 1,105 CFM # FLX112 for your applicatio...
    view full answer...
  • Exhaust Vent Recommendation for Promaster Van with Minimal Vehicle Interior Projection
    The roof vents like the Fan-Tastic part # FV801208 install with a very minimal projection into the interior of the vehicle. If you check out the picture I attached you'll see that the ceiling height of your van would basically be unaffected.
    view full answer...
    Image 1 for
  • Available Trailer Sidewall Vent Covers
    We carry a range of complete trailer vents for roofs and walls as well as many replacement parts that you can see on the linked page. From your description it sounds like you may need both a side ventilator like Polar Multi-Purpose Ventilator # PLR20 (12-1/4 x 10-1/2) and a Side Cowl Ventilator # PLR1715 (6-15/16 x 11-5/8). As you can see these items do not have the exact specific dimensions you are looking for. These are not intended for any one particular trailer type or brand so they...
    view full answer...
  • Recommended Placement and Sealant for Installing Polar Multi-Purpose Ventilator PLR20
    The Polar Multi-Purpose Ventilator # PLR20 has a lever to close the vent when there is risk of heavy rain (please see the linked photo) but the vent will block most water since it also has down-facing louvers on the outside. The lever lets you choose how much airflow you want. Using one at each end of the trailer is a good way to provide cross-ventilation and for the most cooling I suggest placing the rear vent up high (so it can expel more hot air from inside the trailer) and the front...
    view full answer...
    Image 1 for
  • Could Vent for Enclosed Trailers # PLR20 Install on Floor
    The Vent for Enclosed Trailers # PLR20 was intended to be a wall vent but depending on how you installed it and as long as you didn't step on it you could most likely use it as a floor vent. We don't have anything similar that was designed for the floor but maybe the # A10-3366VP would be something you'd consider since it's smaller.
    view full answer...
  • Recommended Vents For An Enclosed Box Truck hauling Horses
    The Vent for Enclosed Trailers - Aluminum - 12-1/4" Wide x 10-1/2" Tall # PLR20 is the largest wall vent we offer so it should offer your horses quite a bit more airflow. The sliding lever allows you to easily open and close the vent to adjust airflow. The aluminum construction is durable, lightweight, and corrosion resistant. Another option you might consider would be to install the Redline 2-Way Pop-Up Roof Vent with Garnish for Enclosed Trailers - Aluminum # RV-626-062-2756 on the...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Wall Vents and Roof Vent for Enclosed Trailer Air Movement
    The Multi-Purpose Ventilator - Aluminum # PLR20 will work to help you move air through your trailer. You may also be interested in the Side Cowl Ventilator with Screen # PLR1715. For the best air movement and still the weather protection, I recommend these side vents for the lower vents and then using a roof vent like # MA00-06401K if you have a trailer battery. If not, then I recommend the Ultra-Fab Solar-Powered Plumbing Vent for Motor Homes - 7" Diameter x 3-3/4" Tall # UF53-945001...
    view full answer...
  • Does The Polar Vent for Enclosed Trailers Have An Interior Mounting Piece
    The Vent for Enclosed Trailers # PLR20 would only mount on the outside of the trailer and would not have a piece to go inside of the trailer. I recommend using some butyl tape # AL28FJ on the mounting flange and non-sag sealant # 344270341437-1 around the outer edge for a waterproof seal.
    view full answer...
  • Side and Roof Vent Options for 5 x 8 Enclosed Trailer
    We carry all sorts of trailer vents and we can help you with a solution to provide proper ventilation in your 5 x 8 trailer. You can use either a roof vent or a side-mount ventilator, or both if you wish. We offer two side-mount ventilators that offer passive air flow, parts # PLR1715 and # PLR20. Side Cowl Ventilator # PLR1715 includes a screen and measures approximately 6 x 11-inches. Ventilator # PLR20 measures approximately 10-1/2 x 12-inches. Both vents allow you to open/close air...
    view full answer...
  • Available RV Air Conditioners
    The RV air conditioners we offer are ceiling/roof-mount types that have ratings from 13,500 to 15,500 BTUs. All appear on the linked page. We do not have wall-mounted AC units but we do offer a wide range of wall vents like # PLR20 and fan-powered roof vents like 12V MaxxFan # MA00-07500K. All wall and roof vents are shown on the other linked page. When space and/or power availability do not allow use of a rooftop AC unit an effective alternative for many is a combination of passive walls...
    view full answer...
  • Vent Options for a Trail Lite Camper Trailer
    For a basic 12V powered vent you can use something like the Ventline # V2094SP-30 which has a manual lift and is more on the simple end of things. For something that is a bit more high-end we have the MaxxFan # MA00-07500K which has a powered lift, thermostat, and a cover on it so that you can keep the vent opened up even when it's raining outside. No matter which vent you end up going with don't forget you also need some hardware and sealant which you can find in the kit # 344270KITW. We...
    view full answer...
  • Options to Vent a Storage Compartment on an RV
    I actually like your first idea better because we have trailer vents that you can install on your door to help keep water spray away from the internal components. Our selection ranges from battery box vents like part # A10-3300BK-05 to ventilator like part # PLR20 to wall vents like part # HMAV2-AVT2. These options will not only help to give you ventilation while protecting your solar setup from the elements but they will also help to give you a clean looking installation. I recommend installing...
    view full answer...
    Image 1 for
  • Recommended Vent Setup to Cool Enclosed Trailer Mobile Workshop
    Even the smallest RV air conditioning units we offer will require 115-volt AC electrical service of at least 11-amps to operate properly. The Atwood Air Command Rooftop RV Air Conditioner will draw almost 4000-watts at startup and even once running it will still need close to 1300-watts to operate. Delivering this amount of power via high capacity 12V batteries and an inverter such as the 5000-watt Go Power # 34280179 will be a fairly costly and bulky proposition. Instead what I recommend...
    view full answer...

Do you have a question about this RV Vents and Fan?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Eric H
Updated by:
Eric H
Employee Amanda M
Written by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.