Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
(750 reviews)
Price: $37.76
In Stock
Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
Item # BV0554-03
Retail:$55.18
Our Price: $37.76
You Save: 32%
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (750)
- Q & A (0)
- Videos (2)
- Photos
- Why etrailer?
Ventline RV Vents and Fans - BV0554-03
- Roof Vent
- Replacement Lid
- 14W x 14L Inch
- Tinted
- Ventline
- Continuous Hinge
Replacement smoke colored vent cover for Ventline old-style rounded dome trailer roof vents.
Features:
- Replacement cover for 14-1/4" x 14-1/4" roof vents
- Domed cover
- Easy to install and operate
- Smoke color
- Made of a polypropylene plastic
- Fits standard Ventadomes and post-1995 Elixir trailer roof vents
- 2-Year limited warranty
BV0554-03 Ventline Replacement Smoke Dome Assembly for Standard Roof Ventadomes (old-style, rounded dome)
Replaces 61271, 63115
Video of Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Ventline Smoke Plastic Enclosed Trailer Vent Cover Installation
Today on this enclosed trailer, were going to install part number BV0554-03 from Ventline. This is a Ventline rounded dome in a smoke color. To start off well go ahead and remove the trim panel at the very bottom. Next well go ahead and remove the screen and also the crank handle as well. Once we have those parts away, well go ahead and reinstall the handle temporarily and raise the lid up, so we can remove it easily. Now well go ahead and then unscrew the crank assembly from the crossbar and then we can go ahead and release it from the lid.
Well slide the arm down towards an open slot at the bottom and then we can go ahead and release it. We got completely loose from the crank, now well go up top and go ahead and remove it from the vent. Well go ahead and open it up and you can see theres a small tab on the inside edge of the hinge and usually these are twisted to the inside, so we just have to untwist it and then it can slide it off. Now we can go ahead and slide on our new vent cover and then basically reinstall it in reverse order. Well go ahead and put our crank assembly up into place and line up the arm with the vent dome, put it into track and then well go ahead and reinstall the crank arm to the vent.
Then we can reinstall our screen and then our trim ring around the edge. In just a few steps the old one has been removed and our new one has been installed. Thatll finish it for part number BV0554-03 on this inclosed trailer. .
Customer Reviews
Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke - BV0554-03
Average Customer Rating: 4.9 out of 5 stars (750 Customer Reviews)
Replacement smoke colored vent cover for Ventline old-style rounded dome trailer roof vents.
- BV0554-03
by: michael11/15/2021
Purchased this vent replacement a year ago and it’s working great and holding up to the weather.
- BV0554-03
by: Tom11/15/2021
I thought I had a major repair to do to replace my car hauler trailer vent cover. There was no brand name or anything identifying what vent system I had, so I was preparing to replace the entire frame, cover, etc. A few emails and pictures that I sent to the folks at etrailer and they were able to identify the part I needed. I only needed to replace the cover, which made this a 25 minute job instead of something more that I was dreading. The folks at etrailer provided that old fashion customer service that you don't get much of anymore, and saved me time and money.
- BV0554-03
by: Lloyd12/21/2020
I have a 16ft 1972 Brougham travel trailer,and my old vent lid disintegrated.I wasn't sure which vent lid to get.I measured the square hole on the roof and it is 13 inches square. I also needed to be sure of the hinge.The hinge portion on the vent cover is 9 inches.After I removed the screws from the vent lid raising mechanism, and disconnected it from the vent lid rail,I went up top,and opened up one side of the rolled metal hinge.Then the roof vent lid slides off to one side.Then you just slide the new roof vent lid onto the hinge,and bend down the tab to secure it.You then reattach the mechanism inside the trailer.Its actually very easy to do,with just a Phillips and straight slot screwdriver. I attached photos of what remained after my lid was blown off completely which shows the hinge and lifting rail that come with a new roof vent cover attached.I also showed a close up of the hinge and the little tab that is bent in on both sides to keep the lid from sliding sideways. Finally I have pics of the new lid installed.I was happy with this product,and didn't realize you could just replace the vent lid so easily.
- BV0554-03
Randy K - 02/04/2018
by: Randy K02/04/2017
My experience with etrailer could not have been better. Their online catalog had very good pictures and product description, so I was confident the I was ordering the right item for my application. Pricing was competitive. George J emailed me after I placed the order to let me know he upgraded my shipping so I could get the product sooner. The vent covers came well packaged and undamaged. Now I need to install them on my vintage 1964 Airstream Overlander, which I bought several years ago and rehabilitated. The white plastic vent covers I installed several years ago became brittle and crumbled. I hope the smoke colored ones I bought from etrailer will last a bit longer, but the price was so fair I bought an extra pair for the next time.
Comments
So far so good!
Randy K - 02/04/2018
- BV0554-03
by: Paul10/06/2020
Called to get help ordering the vent cover to make sure I ordered the right part. Hally was extremely helpful. Got the part quickly. Hally had shown me where to go to watch an installation video. After watching it, installation was very easy. Pictures show the before and after. Thanks!
- BV0554-03
by: Don10/29/2021
The vent cover is a quality replacement almost identical to the OEM on 2018 Windjammer. The OEM had severe ultraviolet deterioration and had a crack in the top center area and a possible hail damage on an outer edge outside of the seal. Had not leaked inside yet! We will see if this one will last any longer than the OEM’s 3 - 4 years.
- BV0554-03
by: Joel08/05/2021
Vent cover worked well and was easy to replace. Snapped right in. Removal of the old was a bit of a pain due to caulking on the hinge portion and the cover woulld not slide off easily.
- BV0554-03
by: Mark05/05/2019
Quick simple fix to replace a vent cover lost to the weather. Installation took less than 5 minutes, product fits like the original. William B. made finding and ordering the right part a breeze.
- BV0554-03
by: William05/23/2021
My camping trailer replacement vents and fan were easy to find on etrailer website, good price, shipped in timely manner. Good quality. I’ve since bought several items from etrailer and have been completely satisfied. It’s a great “go to” place for RV related items.
- BV0554-03
by: John10/31/2021
Still on and water tight after 1 yr on the trailer. Great buy.
- BV0554-03
by: Bartley12/11/2021
It was easy to install and has worked perfectly about a 15min job
- BV0554-03
MICHAEL - 03/24/2021
by: Michael03/23/2020
Can’t beat this product for the price and ease of installation. Also, I really like the smoke cover better than my original opaque one that came with my trailer. Installed in about 10 minutes on a 2015 Diamond Cargo enclosed trailer.
Comments
Still working great with no leaks or signs of damage. Definitely money well spent and highly recommended.
MICHAEL - 03/24/2021
- BV0554-03
by: Brian08/06/2021
Replaced the plastic vent cover on my old RV. The duct tape couldn't hold it together any longer. The new vent went on a year ago and works great.
- BV0554-03
Steve L - 07/27/2016
by: Steve L.07/03/2015
The storm broke two of my vent covers. More storms were forecasted for later this week. I tried the old favorite, duct tape, to no avail. They still leaked. We found the replacement online at eTrailer. One phone call is all it took to receive a shipment of vent covers. I even discussed with eTrailer on the phone to make sure these were the correct vent covers for my older trailer. In two days! I received the vent covers at the campground. A few hours later they were installed and the storm that night tore up the awning, but not a drop from the ceiling vents. P.S. Does eTrailer carry awning parts?
Comments
Still working well.
Steve L - 07/27/2016
- BV0554-03
by: Juju06/01/2021
Fit our trailer perfectly thanks to your excellent customer service representative. Clear instructions made the installation much easier. Very high quality material
- BV0554-03
by: Robert11/06/2021
Great replacement. No issues installing. Easy to install. Would recommend
- BV0554-03
by: Karen11/13/2021
Easy installation, perfect fit.
- BV0554-03
Woody P - 09/24/2019
by: Woody09/24/2018
The smoked Ventline replacement vent cover worked wonderfully. I had to spring for the expedited shipping in order to get it before the hurricane hit but it arrived on-time in 2 days as promised, was easy to install thanks to the installation video, fit perfectly, and provided a secure seal against the rain and wind. As always, etrailer delivered as promised and as advertised. That is why I use them exclusively for all of my trailer needs.
Comments
The cover has worked just fine and is holding up very well. Yet another reason etrailer will always have my business.
Woody P - 09/24/2019
- BV0554-03
Glenn K - 12/09/2020
by: Glenn12/07/2019
Vent cover was promptly delivered, reasonably priced, and easy to install as per the installation video and instructions. For any future trailer needs, etrailer will be the first ones I will contact!!
Comments
After one year, the product looks like the day I installed it! No complaints!
Glenn K - 12/09/2020
- BV0554-03
Kathryn R - 02/03/2021
by: Kathryn02/03/2020
It was exactly what I needed and installation was very easy.
Comments
It is still working good, and looks good, too.
Kathryn R - 02/03/2021
- BV0554-03
by: Matthew07/17/2021
These were a perfect fit for my 2017 Apex 275BHSS. Seems to be better built as well and a little thicker than the originals!
- BV0554-03
by: Geoffrey08/27/2021
Some disassembly required, very easy to install. Direct fit.
- BV0554-03
Barry C - 01/28/2015
by: Barry C.01/28/2014
This is the place for replacement parts for trailers or any towing needs. Shipping is fantastic and super fast. Installation was a breeze and instructions where right on. The product appears to be of good quality and I hope it last for years. Will buy again !! I would send a photo but it's toooooo cold outside to take. It looks just like the picture on the website.
Comments
Its been almost a year and so far the product is still doing what its suppose to do........seal out the weather. Right now as a year ago its cold outside. Again I will say that if I nee and trailer needs I will for sure order it from you guys........job well done!!!!!!
Barry C - 01/28/2015
- BV0554-03
by: Antonio11/10/2021
Just what i needed. great quality and fast shipping
- BV0554-03
by: Luanne01/04/2022
It fits although the metal ones last lo nger
32
766
Show More Reviews
Ask the Experts about this Ventline RV Vents and Fans
- Replacement Vent Cover for Vent With Continuous Metal HingeI did look up your order history (thank you!) and found that the last replacement lid you got from us was the Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - Smoke - Wedge Shape # BVD0449-A03. That said, it looks like you want a replacement lid with a metal continuous hinge and we do carry those, the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White # BV0554-01 and Smoke # BV0554-03, either of which will work for you. I've added links to video...
view full answer...
- Replacement Vent Lid for Ventline AS-13M RV Roof VentWe do offer replacement lids for the Northern Breeze/Ventline AS-13M. You'd want to go with # BV0554-01 for white or # BV0554-03 for smoke.
view full answer... - Recommended Replacement Roof Vent Cover For A Heng's Industries Model 122112 Roof VentTo know what hinge type your Heng's Industries Roof Vent Model 122112 has you would need to get up on the roof as the hinge will be visible on the outside. There are four different hinge styles: 3-point, 4-point, metal continuous, and plastic continuous. Based on what I could find online about your model you would need the metal continuous hinge style which would be Part # BV0554-03 for smoke/black colored cover or Part # BV0554-01 for a white colored cover. If you look at the hinge and...
view full answer...
- What Does the Depth of A Roof Vent MeanWhen you're looking to replace a 14 x 14 roof vent, the depth you'll need will depend on the distance from the ceiling to the top of the roof, or the roof thickness. For instance, the # V3092-603-00 Ventline roof vent wouldn't include the interior trim (also known as the garnish) or the install kit such as # 344270KITW. You'll want to chose a garnish that has a 'Leg' length that's equal to or greater than the thickness of your roof. If the garnish is a little too deep, you can always trim...
view full answer... - Vent to Replace 13 x 13 Roof VentVents now are a standard 14" x 14" so there are no covers we can offer which will work with a 13" x 13" roof vent. I highly recommend enlarging your vent opening and switching to the standard 14" x 14" size to meet the size of today's vents in order to more easily - and less expensively - obtain replacement parts or a replacement at some point. For that, a budget-friendly option is the Ventline Ventadome Trailer Roof Vent # V2092SP-28. For installation you will need the Roof Vent Installation...
view full answer... - Correct Replacement Lid for MaxxAir MaxxFan Plus 4951KThe correct replacement lid for a MaxxAir MaxxFan Plus 4951K/4951KS is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part # MA10A40009K for smoke or part # MA10A40002K for white.
view full answer... - Replacement Ventline Trailer Roof Vent With Screen VD0434From my research the VD0434 model number is the screen for a Ventline roof vent. We carry two replacement lids for the Ventline roof vents. It is more than likely you need the Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent part # BVD0449-A03 which has a plastic hinge that I have added a photo of. If your hinge is metal it is an older model, for that you will need Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents part # BV0554-03. I have added a photo...
view full answer...
- Replacement Lid for Heng's Roof Vent Model 122112I found some photos of the Heng's Roof Vent 122112 online. Based on this, it looks the correct replacement for you should be the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents part # BV0554-01 for white or part # BV0554-03 for black. In order to confirm this you would just need to make sure your roof vent has a continuous hinge (see photo). If you are not sure please just send me a photo of what you have and I will confirm. These covers are both 14-1/2" x 14-1/2".
view full answer...
- How To Find the Correct Replacement Roof Vent Lid for a Palomino PumaThe best way to find the correct replacement vent lid for your 2018 Palomino Puma XLE Lite 30DBSC would be to remove the screen for the vent assembly and then read me the model number on the sticker. That said, the most popular design is one with a continuous hinge (see photo) with a center metal support bracket and if this is what you have you can use the Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents part # BV0554-03 for smoke or part # BV0554-01 for white.
view full answer...
- Higher Quality Roof Vent Covers for my Forest River Motorhome With Heng 122112 Roof VentsYes by using the Replacement Lid for Ventline and Elixir RV Roof Vents part # CAM40161 you will be getting away from the polypropylene type of covers that comes standard and upgrade to the poly carbonate type. This would be my choice over aluminum as well simply for the noise factor during storms. I've linked the product page and video for you below. Happy travels!
view full answer... - How to Determine Replacement Roof Vent Lid for Winnebago 015381-01 on 1988 Winnebago SuperchiefFrom what I read online, the vent lid is something that was specifically manufactured for Winnebago. You can Google search 'Winnebago 051384-01' and find several results. Many folks found that the # BV0554-01 for white or # BV0554-03 we offer was a substantially less-expensive replacement. I'll link you to an article about replacing your vent lid.
view full answer... - Replacement Camper Roof Vent Lid with Continuous Hinge on Dutchmen KodiakThank you for the pictures! The correct replacement lid for your roof vent assembly is the Ventline # BV0554-01 in White or # BV0554-03 in Smoke. I think the Smoke version matches your existing unit a bit better but it's completely up to you - both will work great as replacements. I have attached an installation video that you can also follow along with.
view full answer...
- Metal Vent Cover Replacement for 2008 Pacific Coach Works TangoThe Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - Flat, Mill Finish Metal # BV0534-00 will work with the dimensions you gave. If you have a continuous hinge, this is my recommendation for you. If you don't have a continuous hinge, then let me know which style you have comparing to the attached photo and we can see what options are available.
view full answer... - Replacement Trailer Roof Vent and Installation KitMost RV roof vents are the standard 14 x 14-inch size which is the size that replacement lid # BV0554-03 fits. We can help you with just a new lid if that is all you need and we can also supply a whole new vent assembly if you prefer. If you want to install a complete new 14 x 14 vent you can select one from the page I linked. We have manual vents without fans like # V2092SP-28 and both 12V DC-power vents like # MA00-07500K and 110V AC-power units like # V2128SP-01. At the top of the...
view full answer...
- Replacement Key For Pace American TrailerI looked up your Pace American trailer and it looks like it uses a standard door latch found on most trailers. I did not find any specifics on who makes the door latches or availability of replacement keys. The easiest solution would be to replace the door latch/handle with Global Link RV Entry Door Locking Latch Kit # 295-000019. It comes with 2 Keys, door edge plate, strike plate, and installation hardware. Then in the future if keys are ever misplaced again, replacement keys will be...
view full answer... - Replacement Vent Cover for Ventline Roof VentWe have several selection for replacement vent cover for Ventline Old-Style Rounded Dome in smoke, # BV0554-03. Or in white # BV0554-01. In wedge shape, white, # BVD0449-A01. In wedge shape, smoke, # BVE0108-03. Rounded dome, white, # BBC0530-01. Rounded dome, blue/grey, # BBC-0530-04. Please note the links to product review videos and installations.
view full answer... - Replacement Cover for Roof Vent on a 2017 Forest River Wolf PupThe most common replacement lid for modern roof vents is going to be the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents part # BV0554-01 for white or part # BV0554-03 for black. This is most likely what you need for your 2017 Forest River Wolf Pup but the only way to be certain is to check the hinge type and make sure it matches the attached photo. If it does which it should then this is what you need. The roof vent lids are almost all 14-1/2" - 14-1/2" so this should...
view full answer...
- Replacement Vent Lid for Dutchmen Aerolite Travel TrailerI have attached options for the more commonly seen vent lids used on manual opening roof vents. This is rounded dome style by VentLine in white # BV0554-01, or in smoke # BV0554-03. If you have not previously replaced a vent cover/lid I have attached a couple of useful how-to video. In addition I suggest consider installing an enclosed trailer roof cover such as the # CAM40431. These vent covers lets you keep your RV roof vent open at all times, letting in light and air while keeping...
view full answer... - Options For Replacement Smoke-Color Lid For Ventline VentWe may have a replacement smoke-colored vent lid for your Ventline vent, but I couldn't find any type of reference to VED434. What you can do though is take a look at the two options we have for smoke-colored replacement Ventline lids. What you want to look at in particular are the hinges, and you'll want to get the one with the hinge that matches yours. - Image on Left: Replacement Dome for Ventline E-Z Lift Ventadome Trailer Roof Vent - Smoke # BVE0108-03 - Image on Right: Vent Cover...
view full answer...
- Parts Needed to Replace Entry Door Latch, Roof Vent and Amber Lens on 2018 Rockwood Mini Lite 2509SFor the entry door handle you can use the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Black # 295-000019, which replaces your Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door latch. For the clearance light lens, it looks like you've got a fairly standard 4" x 2" clearance light so you can likely use the Replacement Amber Lens for MC32AB Trailer Lights # A32AB, which snaps into place on the grommet. This lens is a replacement...
view full answer...
- Roof Vent Recommendation for 20 foot Car Hauler TrailerNormally I would say you would probably get by with 1 but since you'll be in a hotter climate in Florida I'd say go ahead and install 2 if you're planning on keeping them open during storage. If you're hesitant, you can always start off with 1 vent and then add another if you feel that it's needed. I'm assuming that you aren't looking for a powered vent. If that's the case then I highly recommend going with the MaxxAir Mini which comes in Black # MA00-03750 or White # MA00-03700. The reason...
view full answer... - Can I Use etrailer.com Trailer Tongue Weight Scale To Measure TW For Weight Distribution SystemYes, the etrailer.com Trailer Tongue Weight Scale part # e99044 will work well to determine the tongue weight of your setup so that you can get a properly rated weight distribution system for your trailer. When choosing a weight distribution system you do want to chose spring bars that have a tongue weight rating that your tongue weight falls in the middle of. For example, Equal-i-zer Weight Distribution System w/ 4-Point Sway Control part # EQ37100ET is rated for trailer tongue weights...
view full answer... - Garnish for Installing Fan-Tastic Roof Vent in RV Ceiling that is 5-1/4 inches ThickThe garnish of the Fan-Tastic roof vent you have part # FV802250 is 4-1/2 inches tall but we do offer taller garnishes like the part # FVK1060-81 which is 6 inches tall and can be cut down shorter as needed.
view full answer... - How to Pick Out Vent Cover Replacement for 2001 MontanaMost likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached...
view full answer...
Do you have a question about this RV Vents and Fan?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality rv vents and fans for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate rv vents and fan information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.