bing tracking image
  1. RV Vents and Fans
  2. Ventline
  3. Roof Vent
  4. No Fan
  5. Vent
  6. 14W x 14L Inch
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White

Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White

Item # V2092SP-28
Our Price: $52.10
You Save: 30%
RV Vents and Fans
Orders above $99 qualify for Free Shipping
Shipping Weight: 5 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Product Expert Kathleen M

Is this right for you? Product Expert Kathleen M says:

Yes, if you:

  • Just want something inexpensive and reliable to add a vent to your trailer or replace an old busted one
  • Prefer a solid white lid that lets in light without the sun shining through and heating up your camper

No, if you:

  • Often have hail or drive under low-hanging branches - the cover isn't the most impact resistant
  • Need a faster way to open and close your lid in rain or high winds than using a hand crank or knob
This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank. Great Prices for the best rv vents and fans from Ventline. Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White part number V2092SP-28 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (605)
  • Q & A (0)
  • Photos
  • Why etrailer?

Ventline RV Vents and Fans - V2092SP-28

  • Roof Vent
  • No Fan
  • Vent
  • 14W x 14L Inch
  • White
  • Manual Lift
  • Ventline
  • 4-1/2 Inch

This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank.


  • Roof vent allows fresh air to enter, and heat to escape, while trailer or RV remains locked and secure
  • Simple, hand-operated crank rotates to open and close dome and eliminates the need for wiring
  • Translucent cover allows some light through
  • Aerodynamic, wedge-shaped dome made of durable polypropylene
  • Galvanized steel roof flange won't rust or corrode
  • Snap-out screen is easy to clean
  • Polar White interior trim piece (or garnish) is included
  • Made in the USA


  • Included garnish fits roofs 1-7/8" to 3" thick
    • Garnish leg length (depth): 2-1/8"
    • Garnish color: Polar White
    • Other garnish sizes are available (sold separately)
  • Cover color: white
  • Rough opening size: 14-1/4" wide x 14-1/4" long
  • Vent extends above roof:
    • 4-1/2" Closed
    • 10-3/4" Open
  • 2-Year limited warranty

Note: Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.

V2092-28 roof vent

Installation Instructions

  1. Mark desired location for vent. Be sure to choose a location between roof joists.
  2. Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
  3. Apply sealant to bottom of flange. Be sure to surround each screw hole.
  4. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
  5. Mount to roof with #8 screws.
  6. Attach interior garnish piece with #8 screws.

V2092SP-28 Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White

Customer Satisfaction Score:

Customer Reviews

Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White - V2092SP-28

Average Customer Rating:  4.7 out of 5 stars   (605 Customer Reviews)

This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank.


etrailer sent me exactly what I ordered. My mechanic said I didn't need the whole thing, only the cover so etrailer graciously allowed me to return the unused and unmarked items.


Just bought a new trailer and it needed a vent. This was so simple to install and if I leave it open while going down the road IT does not break !!!


Metal plate was VERY sharp on the edges and where it was tapped for screws. Cut two fingers just getting it out of the box. Otherwise simple installation.


I like the ease of removing the screens, the handle that lifts the vent Lid is tucked up out of the way, it’s base is made of metal.

Great fan is really quiet.
VikingIam - 06/01/2022


Perfect fit and looks great. Once I removed the old one, it was a pretty straightforward install of this new one.


Easy to install ( I highly recommend a good quality elastomeric caulk) the dome is a light weight plastic, had I known I would have spent more money for a heavier fiberglass unit.


Was very pleased with the service and quick response. It got here sooner than promised and have already gotten it installed. It was used in the conversion of an enclosed utility trailer.


This was a great vent for my family's pop up camper that was passed down the family to me. The vent cover in the middle of the camper was broke into peices and was covered up for many years. No damage was down from the rain so I was thankful. This vent is great and It was real simple to install. And works perfectly and is for sure brand new in the box. Note: it did not come with screws, so you will need to get those along with your caulk tape and caulking of your choice. The instructions calls for size #8 screws. I used 1" long self tapping screws which worked perfectly for the job.

Thanks your fast shipping and reasonable prices, which got my camper as good as new now. I will be using you guys from now on, if anymore parts are needed in the future.


Thanks for the help to get my other vent and every one there was so nice and I will be ordering again


I ordered this for our local FFA chapter, to replace the vent on their trailer. I don't know who will replace it, but I'm hoping it will fit. It looks good but I haven't taken it to them yet.


This is a great replacement part for the OEM vents.


Exact replacement part, great shipping time and with no damage.


Delivery was timely and arrived complete and intact. The Vent dome kit fit perfectly and I was able to install the assembly in a short time with excellent results. I will definitely return to e trailer for future projects.


Trailer roof vent was of high quality and was self installed with no problems. Very pleased with


Currently there is a foot of snow on top of the trailer. I ordered early to have product on hand when weather is warmer I will be able to do the work. After they are installed I'll be happy to write a review.


When the package arrived. I found one of the corners on the frame was bent. I was able to straighten it. Suggest that a better method of packaging for shipment be developed


It’s been 1 year since I purchased this vent kit for my box trailer. I still haven’t installed the vent yet. So I can’t comment as to how well the vent ages when installed. But I can tell you from experience that if you buy it and leave it in the box for a year, it will look brand new when you open it.


Fits perfect easy installation for repl acement


I was pleased and surprised when installing the new vent, that it was not only a perfect fit in the opening in the camper roof, but the screw holes in the flange lined up precisely with the holes from the previous unit I had removed! This may be because there is some kind of industry standard on hatch flange layouts, or I just got lucky. But boy, did that make the install simple and fast. I ran out of my Dicor Self-leveling sealant, before getting completely around the unit, but the job is virtually done and the new vent looks great!

Sorry, but the camper has been parked for a long time. But no question, the new vent is fine: no leaks, functions well. Thanks!
Robert - 11/14/2020


Fit perfect


Exactly what I ordered . Delivery was quick at no cost about 24 hours from order to my door


Easy installation. Great for daytime light, and ventilation.


great , fast shipping right part


I bought this vent to replace the one in my Pace American cargo trailer. The only alteration needed was to trim 1/2 inch off the inside trim, my roof was thinner. I found butyl tape & sealant at Lowes to complete the job. Vent looks great & I like the knob better than the crank, doesn’t stick down to snag stuff.

1 year later I wouldn’t change a thing, works great, looks great!
Ronald - 05/25/2020


Received the vent faster than expected, installed is and work great! Removed the old vent and installed this unit, fits great and the screen is much better than the old one. Great price, fast delivery, installed easily.

Show More Reviews

See what our Experts say about this Ventline RV Vents and Fans

  • Availability of RV Roof Vent Replacement with Part Number VDO434
    That part number matches a Ventline Ventadome roof vent like the part # V2092SP-28 which has a white lid or part # V2092SP-29 which has a smoked lid.
    view full answer...
  • Depth of RV Roof Mount Vent for installing through the roof
    I went out to the warehouse and the thickness of the rough opening in the roof for installing this vent can be from 1-7/8 inches to 3 inches.
    view full answer...
  • Will Trailer Roof Vent, Part # 60758 Fit Roof That is 2-1/2 Inches Thick
    The interior trim piece on the Ventline Trailer Roof Vent, part # V2092SP-28, fits roofs 1-7/8 inches to 3 inches thick. This unit should work just fine for you. I have included a link to a video review of the vent for you.
    view full answer...
  • Availability of a Ventline Replacement Trailer Roof Vent Cover
    We have the Vent Cover for Ventline and Post-1995 Elixir Trailer Roof Vents - White - Low Profile, # 63113. It fits 14 inch by 14 inch plastic frame vents.
    view full answer...
  • Replacement Trailer Roof Vent Cover for 2008 Crossroads Cruiser
    Trailer roof vents are commonly sized to fit a 14-1/4 x 14-1/4-inch rough opening in the trailer roof. This is true for the part you referenced, Ventline Ventadome Manual Trailer Roof Vent # V2092SP-28. This is a complete vent assembly. If you only need a replacement lid we do also offer these in various colors and hinge types. The link provided will take you to our main page for replacement vent lids where you can select a suitable replacement by the type of hinge on your trailer's...
    view full answer...
  • Replacement Vent Cover for 1994 Jayco Eagle Travel Trailer
    We offer a range of complete trailer vent assemblies, such as the Ventline # V2092SP-28 that you referenced, as well as replacement vent covers in various materials and colors. The Jayco website does not provide specifics as to the vent supplied with your trailer but typically trailer vents are a standard size intended for 14-1/4 x 14-1/4 roof openings. You can select a replacement vent cover using the link provided. This will take you to our main page for trailer vent lids and you can...
    view full answer...
  • Options for Replacing a Roof Vent that is 12-1/2 by 12-1/2 inch That is Missing Lid
    All of the replacement vent lids we offer are designed to fit 14 by 14 inch roof vents so we do not have a lid recommendation I could make. Only thing I could recommend would be a replacement vent like the Ventline Ventadome Trailer Roof Vent # V2092SP-28 to replace your entire roof vent.
    view full answer...
  • Replacement Garnish for a Ventline Trailer Roof Vent
    It sounds like you are talking about the ceiling garnish. I have included a link to the ones that we carry to the right. But they are all 14-1/4 inches square. This is the measurement of the part that fits in the opening though, not the overall width so one of these garnishes is likely to fit if you have a Ventline roof vent.
    view full answer...
  • Replacement Roof Vent Lid for 2007 Haulmark Trailer
    I do not have any information about which particular vent Haulmark used on their trailers, but you can easily determine which replacement lid you need. The easiest way to do this would be to provide me with any manufacturer and model number information you might be able to find. With this information, I can check with the various manufacturers for a replacement lid. If you cannot find any info on the remaining vent, you will need to measure the existing vent. When measuring for a replacement...
    view full answer...
    Image 1 for
  • Will Ventline Roof Vent Fit 1988 Holiday Rambler Imperial
    When replacing the roof vents on your 1988 Holiday Rambler Imperial RV, you will want to take a couple of measurements. The Ventline Roof Vent, part # V2092SP-28, measures 16-1/2 by 16-1/2 inches on the outside edge. The part of the vent that fits in the roof of your RV measures 14-1/4 by 14-1/4 inches, and the metal portion of the vent measures 3-1/2 inches high. If these dimensions match the opening size for your RV then this will work for you. I also recommend the installation kit...
    view full answer...
  • How to Remove a Broken Roof Vent Dome Cover on a Trailer
    The removal of an old vent cover is usually not very difficult, but the exact process will depend on the brand of the vent. Typically, the first steps are to remove the handle, the screen and, in some cases, the lower or interior trim piece. Next, you will want to determine how the arm is attached to the cover and base. The arms slide along either a plastic or metal track that is attached to the vent cover. The arms are usually held to the vent base and handle with screws, which would...
    view full answer...
  • Will Ventline Non-Powered Trailer Roof Vent - White, # V2092SP-28 Fit an Interstate Cargo Trailer
    The Ventline Non-Powered Trailer Roof Vent - White, # V2092SP-28, will fit an opening in a trailer roof that is 14-1/4 inches square and 1-7/8 inches to 2-3/4 inches thick. If these dimensions match what is currently on your trailer, this vent should fit. Based on the research I did for this model trailer, it seems as though it does use the standard 14-1/4 inch square vent. I have included a link below to all of the vents and vent covers we carry.
    view full answer...
  • Is MaxxAir Vent Cover # 64643 and Ventline Ventadome Trailer Roof Vent, # V2092SP-28 Compatible
    I went out to the warehouse and pulled a MaxxAir Vent 64643 and a Ventline Ventadome Trailer Roof Vent, # V2092SP-28, and tested them together. The MaxxAir fits over the Ventline vent so the two are compatible. The MaxxAir cover was designed to fit over a standard 14 inch by 14 inch trailer roof vent.
    view full answer...
  • Installing Trailer Vent # V2092SP-28 on Snowmobile Trailer with 1/8 Inch Thick Roof
    The garnish that is included with the V2092SP-28 is 2-1/8 inches thick, which is the shortest one offered. You can certainly use the vent, but you will have to modify the garnish or use some lumber to make a frame around the hole to take up some of the additional room. Due to the very thin roof, I would suggest making a frame as it would add some stability for the rough opening and provide a strong attachment point for the vent.
    view full answer...
  • How to Determine Which Replacement Vent Lid for 2005 Lowe's 6x10 Utility Cargo Trailer
    It sounds like you're just needing a replacement vent lid. If just the existing lid is damaged, you can just replace the lid instead of the entire assembly. In order to determine the correct replacement vent, you'll first need to examine what's left of the old vent cover and the vent itself. Look for any brand name or part numbers. Most roof vents are made to fit an opening that is approximately 14-1/4 x 14-1/4. This size is often referred to as 14 x 14. The old vent in your trailer is...
    view full answer...
  • Recommendation for Trailer Roof Vent with Metal Cover
    I wish we did, but the only replacement covers we offer for the # V2092SP-28 are plastic ones. If this is the vent you have then the only way to get a metal cover would be to replace the entire thing with the part # V2110SP-24.
    view full answer...
  • Will a Regular Vent with No Fan Fit in Place of a Ventline Northern Breeze Roof Vent
    Yes, you can replace the Northern Breeze vent with a regular vent with no fan. Both the Ventline Northern Breeze vents and a regular vent with no fan such as # V2092SP-28 fit in the same 14-1/4 inch rough square opening! I have linked a couple of helpful videos on the regular vent for you.
    view full answer...
  • Replacement Trailer Roof Vent for Bad Frame and Screen on RV
    If you need to replace the vent frame and screen your best option would be to replace the entire unit as a whole. Measure the hole in the roof of your trailer where the vent would install and as long as it's right at 14 inch by 14 inch the standard roof vents like the Ventline Ventadome Vent part # V2092SP-28 would work well.
    view full answer...
  • Low Profile Vent with Flush Knob for Collapsible Roof
    I was not able to reference the FanTastic Vent part 810192 but I believe I have exactly what you need. The Ventline Ventadome Trailer Roof Vent part # V2092SP-28 is designed for a 14-1/4" wide x 14-1/4" long openings which is likely what you have and the open/close knob is recessed inside the vent assembly. I have attached an install and review video for you as well.
    view full answer...
  • Replacement Roof Vent Recommendation for 1989 Mallard Sprint
    Most likely your 1989 Mallard Sprint uses a standard RV style roof vent like the Ventline # V2092SP-28 is designed to fit. If the opening for the vent measures right at 14 inch by 14 inch this vent will fit and work well. I attached an install video for this vent for you to check out as well.
    view full answer...
  • Replacement Roof Vent for 1979 Jayco Pop-Up Tent Trailer
    We do have many types of RV vent items you can see on the linked page including manual and fan-powered models, however, none measures 10 x 10. The vast majority of RV roof vents in use are 14 x 14-inches, like # V2092SP-28, and fit into roof openings that are generally 1/4-inch larger in each dimension, 14-1/4 x 14-1/4. If it happens that you measured the trailer's interior trim ring, or garnish, this could have the 10 x 10 dimension you noted. I know it is more challenging to remove the...
    view full answer...
  • Where to Measure Trailer Roof When Picking Out Replacement Roof Vent
    The hole size that our roof vents are designed to fit is 14 inch by 14 inch. If you measure the opening and get that figure what we have would fit. If you measure just the lid it'd be most likely right around 13-1/4 inch. This size is very popular on trailer roofs. So much so that we rarely ever see anything different. The part # V2092SP-28 is our most popular style of roof vent to fit that opening size.
    view full answer...
  • Choosing Correct Replacement Roof Vent Lid for Trailer
    When measuring for a replacement vent lid, you will want the outside dimension of the housing that extends through the trailer roof. This dimension is typically just under 14 by 14 inches, which means that the lid you'll need would measure right about 14 x 14, or a tiny bit larger. Closely examine the remaining portion of the vent, looking for a manufacturer name or model number. If you cannot find that information, you can examine the replacement lids we offer (see link) and match them...
    view full answer...
    Image 1 for
  • Roof Vent Recommendation for 1961 Little Gem Trailer
    The Ventline Roof Vent # V2092SP-28 is the standard size that requires a rough cut opening on the roof of your trailer of 14-1/4 inch by 14-1/4 inch. If you have a 13-3/4 inch square opening you'd need to open yours up a bit to get this to fit.
    view full answer...

< Previous
123. . .8

Do you have a question about this RV Vents and Fan?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv vents and fan information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Raymond P
Written by:
Raymond P
Employee Kathleen M
Updated by:
Kathleen M
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Adam Y
Updated by:
Adam Y
Employee Isabelle B
Updated by:
Isabelle B
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Robert C
Installed by:
Robert C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.