bing tracking image
  1. RV Vents and Fans
  2. Ventline
  3. Roof Vent
  4. Vent
  5. 12V Fan
  6. 14W x 14L Inch
Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" - Smoke
Ventline

Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" - Smoke

Part Number: V2094SP-34
In Stock
$150.58
RV Vents and Fans
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, smoke-colored plastic vent cover opens and closes with a hand-operated crank. Great Prices for the best rv vents and fans from Ventline. Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" - Smoke part number V2094SP-34 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1117)
  • Q & A (0)
  • Photos

Ventline RV Vents and Fans - V2094SP-34

  • Roof Vent
  • Vent
  • 12V Fan
  • 14W x 14L Inch
  • Tinted
  • Manual Lift
  • Ventline
  • 4-1/2 Inch
  • Plastic and Metal

This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, smoke-colored plastic vent cover opens and closes with a hand-operated crank.


Features:

  • Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure
    • Simple to upgrade from non-powered model
  • Basic, hand-operated crank rotates to open and close dome
  • Switch to turn the fan on/off is mounted on the vent
  • Translucent cover allows some light through
  • Aerodynamic, wedge-shaped dome made of durable polypropylene
  • Galvanized steel roof flange won't rust or corrode
  • Snap-out screen is easy to clean
  • Polar White interior trim piece (or garnish) is included
  • Fan uses 12-volt DC power
    • Wiring sold separately
  • Made in the USA


Specs:

  • Included garnish fits roofs 1-7/8" to 3" thick
    • Garnish leg length (depth): 2-1/8"
    • Garnish color: Polar White
    • Other garnish sizes are available (sold separately)
  • Fan power: 12-volt DC
    • 100 CFM
  • Cover color: Smoke
  • Rough opening size: 14-1/4" wide x 14-1/4" long
  • Vent extends above roof:
    • 4-1/2" Closed
    • 10" Open
  • 2-Year warranty


Notes:

  • Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.
  • Not for use above tubs, showers or range cooking surfaces.

V2094SP-34 roof vent



Installation Instructions

  1. Mark desired location for vent. Be sure to choose a location between roof joists.
  2. Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
  3. Apply sealant to bottom of flange. Be sure to surround each screw hole.
  4. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
  5. Mount to roof with #8 screws.
  6. Remove screen frame and wiring compartment cover to make electrical connections.
  7. Connect to 12-volt DC power source
  8. Replace screen frame and cover.
  9. Attach interior garnish piece with #8 screws.


V2094SP-34 Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" - Smoke





Customer Satisfaction Score:


Customer Reviews

Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" - Smoke - V2094SP-34

Average Customer Rating:  4.7 out of 5 stars   (1117 Customer Reviews)

This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, smoke-colored plastic vent cover opens and closes with a hand-operated crank.

by:

Vent was easy to install, really didn't need the instructions. I would have appreciated a template for the hole though. That way I can just throw the template up and cut along it. A recommendation to reinforce the underside with something (I used 2x2s) might be helpful as well. You do say to align it with a joist, but who's really going to have multiple joists within 14 1/2" from each other? Otherwise, it looks great. I figured you have multiple images of the vent itself so I figured an image of how I reinforced it would be the most helpful for future installers.
Thank you.

Aaron



by:

This product got great reviews, and I'm not sure why. I was very disappointed in this vent. First, etrailer shipped it with the sealant on top of the unit and damaged it (still haven't heard back from them).

Aside from that, the unit is supposed to be smoke. I thought some light inside my pop-up would be nice, and maybe the white unit I had before wouldn't look so dirty all the time if it was smoke. Outside it looks gray. Inside it looks blue. When the sun shines on it, it makes the inside of the trailer look rather depressing and blue. The lid itself is very flimsy, and flexes in the wind. While traveling, the flex allowed the vent to come out of the channel even while fully closed. It was a fun in-camp fix and I was thankful it didn't rain. The seal that goes around the rim does not stay on, and I am constantly pushing it back down (removing the screen to do so, reaching my arm through the hole and pushing it back on). IF I keep this thing, I will replace that lumpy weatherstripping with my own.

Note: The new garnish (trim) did not work with my popup. I used my old garnish and cleaned it up with plastic polish and it worked well. It wouldn't have worked as well if I broke the old trim, so keep all your parts if you decide to get this thing.

I didn't see any alternatives for the price on etrailer, but may shop around if the lid comes apart again on my next trip out.



by:

Product material and build is solid. Easy to install. I like the smoke colored cover, lets in the right amount of sun (we dry camp in the Southwest a lot). The fit between screen and frame with the open/close knob was off by about 1/4 inch in depth. Was able to adjust the knob mounting position down so as to insure a tight fit between screen and beauty ring. We have an eighteen-year-old rig, so it is challenging to find replacement parts that fit as original. But it fits great now! great web site - easy to drill down to appropriate parts. Thanks again.



by:

I absolutely love my new vents! We did find that the trim piece was too deep for our folding camper, but that problem was easily solved by trimming off what we did not need. We will also have to remove the handles when we fold the camper up, but that is no big deal for me. My husband had no problem installing the electrical for the upgraded vent we purchased. I do however wish that there were screw buttons to cover the screws, my husband is known as the "Silicon King" and made his own buttons with dabs of silicon...trust me not the prettiest look!



by:

I installed this on my enclosed trailer, with a air vent cover, keeps it a lot cooler in the summer.



by:

I am in the process of replacing all of the roof vents in my toy hauler and found etrailer was able to supply just what I needed and at a competitive price. I have had good dealings with them whenever I needed rv parts.



by:

Etrailer Is a great company my hole experience hase been grate and I would deffanetly recomend this sight to anyone looking fot parts I got my product almost as fast as next day witch was really awsome and as far as the product goes it was everything that thay said it was witch made finding what I whanted very easy



by:

Shipping was extremely fast. Product looks good. I just don't have them installed yet. Very good service . I would recommend etrailer to everyone.



by:

Sunroof for my camper has been great. Thanks



by:

etrailer is great



by:

Still working a year later, no problems, store my rig indoors so not seeing any sun damage at this time.



by:

All the products I have purchased here have been excellent!



by:

Was the right size and fairly easy to install.seem to be a really good product...



by:

I have not installed it yet, but looks to be of great quality. Shipping was fast and website was easy to use.



by:

Got my order on time and was what I order product is of excellent quality would do bisness with this company again



by:

GREAT



by:



by:



by:



by:

Good stuff....well packaged too!



by:



by:



by:



by:

Well made vent should last years. I like the removable screen for easy cleaning. Unfortunately the roof vent mounting flange is badly damaged. I will need to do some work with my hammer and anvil to make it useable. This is clearly incorrect/damaged.



by:

I’m writing this review before installing the vent so I can’t attest to its durability/longevity. This is a lightweight unit but it should suffice for use about three times a year for a couple of days at a time. This unit is affordable; well under $200. It is a next step up from a passive vent with no fan.


25
1105
Show More Reviews

See what our Experts say about this Ventline RV Vents and Fans

  • Replacement Lid For Ventline Roof Vent V2094
    The correct replacement dome lid for V2094 # V2094SP-34 would be part # BVD0449-A03.
    view full answer...
  • Replacement Vent Recommendation for Ventline V2503 on a 2006 Jayco Baja
    We have a variety of Ventline replacement vents that fit your application, but I wasn't able to find anything with that exact part number you mentioned. For a replacement vent I recommend checking out the Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" Opening # V2094SP-34. This is a pretty basic electric vent and it comes with the inner garnish but you need mounting hardware and sealer which is found in this kit # 344270KITW. I'm also linking a review...
    view full answer...
  • Replacement Trailer 14 x 14 Roof Vents and Installation Kits
    Camco part # CAM40148 is a smoke-color replacement vent LID ONLY that fits specific production years of Ventline and Elixir vents models. It fits Ventline vents with a continuous metal hinge that were produced before 2008 and similar Elixir brand vents produced after 1994. This hinge type is shown in the linked photo. We do also offer complete vent units that include the lid. These 14 x 14-inch complete vents are shown on the linked page. We have models without fans like # V2092SP-29 or...
    view full answer...
    Image 1 for
  • Replacement For A Northern Breeze Ventline RV Vent Motor
    Unfortunately we do not carry the motor for the Northern Breeze model so I recommend replacing it with the Ventline Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-34. This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security.
    view full answer...
  • Solution for Northern Breeze RV Roof Vent with Bad Motor
    The motor for the V2525 Northern Breeze fan is unfortunately not available as a replacement part. If the motor is bad then the best solution is to replace the entire vent unit with part # V2094SP-34 which has the 12V fan and a manual lift. You will also need the install kit # 344270KITW which comes with seat and mounting hardware.
    view full answer...
  • Roof Vent Needed with 12V Fan That Sits Under 5 Tall
    The Ventline Ventadome Trailer Roof Vent # V2094SP-34 that you referenced actually sits only 4-1/2" above the roof when it is closed so it will fit in your garage! It comes with a 12V fan that is powered by DC. Most of our vents fit this description though so you are in luck! If you are looking for a vent that can stay open and still fall under your 5" height restriction then you will need the Ventline Vanair Trailer Roof Vent # VP-543SP. This is a round vent with a diameter of 6-1/4"...
    view full answer...
  • Replacement Parts for Ventline V2094 Powered Vent
    I am sorry to hear about that. We do offer a couple of replacement parts for the V2094 powered vent. The Replacement Operator, Knob and Screw item # BVD0462-00 and the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents item # BVD0215-00. If neither of these parts are what you are looking for we offer entire replacement assemblies for the V2094. The vent assembly item # V2094SP-34 in smoke and item # V2094SP-30 in white.
    view full answer...
  • Replacement Ventline Trailer Roof Vent Covers for Parts V2092 and V2094
    We carry a broad range of Ventline products, complete vent assemblies as well as individual replacement parts, for both of the part numbers you referenced. For Ventline item V2092 we offer complete vent assemblies, # V2092SP-29 in smoke color and # V2092SP-28 in white. Replacement domes are also available, # BVD0449-A03 in smoke and # BVD0449-A01 in white. For powered vent V2094 we offer a complete vent assembly # V2094SP-34 in smoke and # V2094SP-30 in white. Replacement domes only...
    view full answer...
  • Replacement Parts Needed for a Northern Breeze Model V2525 Vent
    We do have most of the parts that you referenced and although we don't have instructions we do have some diagrams on each of the product pages that you can check out. Item 7 - # VC0476-00 Item 14 - # BV0115-04 We don't have items 1, 15 and, 16, but it sounds like 15 and 16 come with the item 14. In all honesty it would be much more cost-effective for you to just purchase a whole new 14" x 14" unit # V2094SP-34 as opposed to piecing it out. You would just need the screws and sealer that...
    view full answer...
  • Replacement Vent Cover for Ventline Roof Vent
    We have several selection for replacement vent cover for Ventline Old-Style Rounded Dome in smoke, # BV0554-03. Or in white # BV0554-01. In wedge shape, white, # BVD0449-A01. In wedge shape, smoke, # BVE0108-03. Rounded dome, white, # BBC0530-01. Rounded dome, blue/grey, # BBC-0530-04. Please note the links to product review videos and installations.
    view full answer...
  • Recommended Electric Replacement for Manual Trailer Roof Vent
    The trailer roof vents are all the same size so you can replace them rather easily. I recommend the Ventline Ventadome Trailer Roof Vent part # V2094SP-28 for white or part # V2094SP-34 for smoke. These options both have an electric exhaust fan with integrated controls.
    view full answer...
  • Accessing a Ventline Nothern Breeze to Look at the Operator
    I have included a diagram that shows the location of some screws that attach the screen frame and the upper housing (fan shroud) to the flange. That may allow you to access the area you are needing to look at. The Ventline Northern Breeze is a discontinued fan model and there are very few replacement parts available. If you get in there and realize you are in need of replacing some parts, you would be better off replacing the vent/fan with something like the Ventline Ventadome Trailer...
    view full answer...
    Image 1 for
  • Replacement For Ventline Roof Vent With Smoke Color Lid
    Yes we do have a replacement for your 14 inch Ventline roof vent with a smoke colored lid. I'm not sure if your vent had a 12 volt fan or not so I'll go ahead and give you the options for the vent with and without the fan. - Ventline Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-34 - Ventline Ventadome Trailer Roof Vent # V2092SP-29 Both come with a garnish for 1-7/8" to 3" thick roofs, and if you also need the kit to install that the correct part is the Roof Vent Installation Kit...
    view full answer...
  • Troubleshooting Northern Breeze VentLline Dome Lid that Won't Open Automatically
    The Replacement Gear Motor with Pinion Gear for Ventline Ventadome Trailer Roof Vent # BVB0601-00 or just the Replacement Plastic Gear for Ventline Ventadome Trailer Roof Vent - Dome Motor Gear # BVD0121-00 is what you need to lift the dome.
    view full answer...
    Image 1 for
  • Trailer Roof Vent With 110V Fan and Smoke Dome Assembly
    The only 14W x 14L roof vent we offer with a 110V fan is the Ventline Roof Vent part # V2128SP-01 with a white dome assembly however, you may switch out the dome assembly on the vent with part # BVD0449-A03 with the darker smoke color lid. If it turns out you need a 12V fan with a smoke colored dome assembly, I recommend Ventline Ventadome Trailer Roof Vent w/ 12V Fan part # V2094SP-34.
    view full answer...
  • Recommended Replacement Trailer Roof Vent for a Ventline Northern Breeze V2501
    Hey Anne, so we don't have any direct replacements for a Northern Breeze V2501 so I'd recommend a complete replacement using the Ventline Ventadome Trailer Roof Vent # V2094SP-34. This roof vent has a 12V reversible fan, is made in the USA, and has a Smoke cover.
    view full answer...
  • Northern Breeze Vent Fans - One Will Not Turn On, One Will Not Turn Off
    Hello Matthew. It is odd that you would be having problems with both vents simultaneously. Generally, when these vents are not functioning properly, or will not respond to controls it is an indicator that your control board in malfunctioning and needs to be replaced. Unfortunately, we do not offer a replacement for the Northern Breese model, so I would have to recommend replacing the vent entirely with something like the Ventline Ventadome Trailer Roof Vent # V2094SP-34.
    view full answer...
  • Replacement Vent Options for a 6x10 SA 3500 Trailer
    I am not sure what size vent you currently have on your 6x10 SA 3500, but the most common size fits a 14-1/4" wide x 14-1/4" long opening. I have included a few different options that you can take a look at, depending on what you want in your vent. For a manual open vent with no fan, we have the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-603-00. For a manual open vent with a 12v fan, we have the Ventline Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-34. For a powered lift...
    view full answer...
  • Replacement For A Northern Breeze V2525 Roof Vent
    The Northern Breeze V2525 Roof Vent and all of it's parts have been discontinued so the most cost effective and practical option is to just replace the unit entirely instead of rigging other vent parts to try and fit your needs. I recommend the Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" - Smoke Item # V2094SP-34 and the installation kit # 344270KITW.
    view full answer...
  • Availability of Replacement Motor for V2525 Northern Breeze Fan
    The motor for the V2525 Northern Breeze fan is unfortunately not available as a replacement part. If the motor is bad then the best solution is to replace the entire vent unit with part # V2094SP-34 which has the 12V fan and a manual lift. You will also need the install kit # 344270KITW which comes with seat and mounting hardware. If you would like to upgrade the vent unit just let me know and I can help you find one that best suits your needs.
    view full answer...
  • Replacement Dome Lid for Ventline V2094SP-34 RV Roof Vent
    We sure do! The correct replacement dome lid for # V2094SP-34 would be part # BVD0449-A03.
    view full answer...
  • Options for a Northern Breeze Fan That Stopped Working
    It sounds like you likely have an issue with the circuit board. Unfortunately the Northern Breeze fan was discontinued in 2009 and we do not have the replacement parts available anymore. If parts are starting to go bad on your fan, the best solution is going to be to replace your fan with the Ventline Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-34 which has a 12v fan and manual lift. If you want to upgrade your fan, just let me know what you would like in your fan and I would be happy...
    view full answer...
    Image 1 for
  • Are Replacement Fan Motors Available For A Ventline V2027 Round Vent
    Compatible parts for your Ventline V2027 unfortunately are no longer available so a complete replacement of the vent is the only solution we can currently offer. With the hole being larger than the round models we currently offer at 8" in diameter the best solution would be to cut you hole larger and install a standard 14" x 14" vent like part # V2094SP-28 for white or part # V2094SP-34 for black.
    view full answer...
  • Is a Replacement Motor Available for Ventline Northern Breeze V2525?
    Unfortunately we do not carry a replacement motor for a Ventline Northern Breeze V2525 and I recommend simply replacing that vent assembly with a new one, the Ventline Ventadome # V2094SP-34. This fan fits standard 14" x 14" roof openings in roofs that are 1-7/8" to 3" thick.
    view full answer...


< Previous
12



Do you have a question about this RV Vents and Fan?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Raymond P
Written by:
Raymond P
Employee Jacob T
Video Edited:
Jacob T
Employee Adele M
Updated by:
Adele M
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B
Employee Randy B
Test Fit:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.