Ventline E-Z Lift Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - Smoke
(94 reviews)
Price: $58.94
In Stock
Ventline E-Z Lift Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - Smoke
Item # V3092-603-00
Retail:$100.87
Our Price: $58.94
You Save: 42%
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (94)
- Q & A (0)
- Photos
- Why etrailer?
Ventline RV Vents and Fans - V3092-603-00
- Roof Vent
- No Fan
- Vent
- 14W x 14L Inch
- Tinted
- Manual Lift
- Ventline
Open this roof vent quickly and easily with the gear-free, spring-loaded handle. The handle locks the translucent, wedge-shaped dome into 10 different positions. Screen snaps out for easy cleaning. Installation kit and garnish sold separately.
Features:
- Roof vent allows fresh air to enter and heat to escape while your RV, camper, or enclosed trailer remains locked and secure
- Easy-to-use handle lets you quickly open and close the vent from inside your RV
- Spring-loaded handle locks into 10 different positions
- No gears - opens vent faster than a standard crank handle or hand knob
- Ergonomic T-shape is easy to grip
- Aerodynamic, wedge-shaped dome (or lid) is made of durable smoke-colored polypropylene
- Translucent dome allows some light through
- Polar white screen snaps out for easy cleaning
- Vinyl weather seal helps keep water out when vent is closed
- Manual lift design - no need for electrical wiring
- White, 1/4" think mounting flange is built in
- UV-resistant, long-lasting specialty polymer plastic construction
- Smooth edges won't cut you during installation
- Works well with all roofing materials
- Interior trim piece (or garnish) and installation kit sold separately
- 4 Mounting points on flange allow for installation of a vent cover (sold separately)
- Made in the USA
Specs:
- Rough opening size: 14-1/4" wide x 14-1/4" long
- Overall dimensions (outside of flange to outside of flange): 16-1/2" wide x 16-1/2" long
- Vent extends above roof:
- 4" When closed
- 9-1/2" When fully open
- Limited 2-year warranty
Spring-Loaded Handle on Ventline E-Z Lift Ventadome
The easy-to-use handle on the E-Z Lift Ventadome lets you quickly open and close the roof vent from inside your RV. Unlike a standard handle or knob that can take time to crank, the handle on this vent is spring loaded. Simply pull on the handle and move it into one of 10 positions to open the vent. Each position offers a different degree of opening, and the handle locks into place. Also, the handle's T-shape makes it easy to grip.
Integrated Mounting Points for Vent Cover
There are 4 mounting points built into the flange of this roof vent. These points allow you to install a vent cover (sold separately) over the roof vent.
Installation Instructions
Note: Interior trim piece (garnish) and installation kit with screws and sealant are sold separately.
- Mark desired location for vent. Be sure to choose a location between roof joists.
- Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
- Apply sealant to bottom of flange. Be sure to surround each screw hole.
- Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
- Mount to roof with #8 screws.
- Attach interior garnish piece with #8 screws.
V3092-603-00 Vent Line Easy Lift Ventadome RV Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke
Customer Reviews
Ventline E-Z Lift Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - Smoke - V3092-603-00
Average Customer Rating: 4.8 out of 5 stars (94 Customer Reviews)
Open this roof vent quickly and easily with the gear-free, spring-loaded handle. The handle locks the translucent, wedge-shaped dome into 10 different positions. Screen snaps out for easy cleaning. Installation kit and garnish sold separately.
- V3092-603-00
by: Nancy07/26/2018
I have purchased these before. Although they are not a real high end product, they are a good quality and I really like the way they open and close. I replaced all my vents with these this time around. Plan on getting vent covers for them. Had no problems with past purchase.
- V3092-603-00
by: Amanda08/16/2021
Vent is as described and worked well for our DIY trailer. Shipping was prompt and arrived on time!
- V3092-603-00
by: Miquel08/05/2021
Great product and service I buy my trailer axles from you guys as well.
- V3092-603-00
by: Jason07/22/2021
Appears to be very well made. The flange around the outside is definitely thicker than I thought it would be. It's probably 3/16"-1/4" thick. Have not installed as of yet.
- V3092-603-00
by: Robin08/27/2021
The quality, fit and finish look great!
- V3092-603-00
by: Jim06/01/2018
I needed to update the vent on my enclosed trailer and ordered one from etrailer.Very nice vent and it complements the trailer. Very pleased with every aspect of online shopping at etrailer..
- V3092-603-00
by: John09/24/2021
Good vent - shipped quickly
- V3092-603-00
by: Robert G.01/27/2017
I have ordered multiple items through etrailer.com and have never had any issues with the items I received. Great Job.
- V3092-603-00
by: Eva02/24/2017
I had ordered this hatch because I found an unusually thin ceiling in my Scamp 13, and could not make any of the other hatches' trim rings fit, no matter how much whittling I was prepared to do. This one not only looks better than the cheesy metal-framed ones, but sits almost entirely on top of the deck, with a trim ring arrangement that easily accommodates most any deck thickness. Problem solved! Very nice!
- V3092-603-00
Mark J - 10/19/2017
by: Mark J10/16/2016
The product was exactly as specified and arrived in proper time. Looks like it will work great. Only just installed so I am not sure of the longevity of the vent, but it looks well constructed.
Comments
Still working great
Mark J - 10/19/2017
- V3092-603-00
by: Good03/01/2017
Good quality replacement may go a far as quality upgrade to original.
- V3092-603-00
by: Ryan03/26/2019
The product was exactly what I needed and customer service personally gave me a call to let me know about the order being a few weeks out which I thought was really personal. I would buy again for sure!
- V3092-603-00
by: Janis09/06/2020
love my new vents; thanks for the speedy delivery
- V3092-603-00
by: Troy08/29/2019
Good construction Works well
- V3092-603-00
by: HOLLY J02/28/2017
PRODUCT IS GREAT, THE SHIPPING WAS GREAT. AND THE SERVICE WAS EXCELLENT
- V3092-603-00
by: Brandy08/09/2017
Nice addition
- V3092-603-00
by: Douglas F05/04/2020
Work exceptionally well, would purchase again
- V3092-603-00
by: Jack05/01/2020
Everything worked perfectly and was delivered on time. Thank you
- V3092-603-00
by: Dave R.08/30/2017
Works great!
- V3092-603-00
by: Greg10/11/2021
- V3092-603-00
by: Jeff04/01/2021
- V3092-603-00
by: Janet08/22/2021
- V3092-603-00
by: Patricia06/29/2021
- V3092-603-00
by: Brian12/16/2021
- V3092-603-00
by: William07/10/2021
25
97
Show More Reviews
Ask the Experts about this Ventline RV Vents and Fans
- What Does the Depth of A Roof Vent MeanWhen you're looking to replace a 14 x 14 roof vent, the depth you'll need will depend on the distance from the ceiling to the top of the roof, or the roof thickness. For instance, the # V3092-603-00 Ventline roof vent wouldn't include the interior trim (also known as the garnish) or the install kit such as # 344270KITW. You'll want to chose a garnish that has a 'Leg' length that's equal to or greater than the thickness of your roof. If the garnish is a little too deep, you can always trim...
view full answer... - Roof Vent for Enclosed Cargo TrailerThe Ventline E-Z Lift Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - Smoke # V3092-603-00 you mentioned is a great option. You do not need to add an interior garnish, however, I do recommend you use a frame of some sort for your vent to have the installation screws attach to. If it were me, I'd use the Ceiling Garnish for Ventline Roof Vent - 2-1/8" Leg - 14-1/4" x 14-1/4" - Polar White # VA0445-34 to finish the frame out. The handle will be the lowest point of the vent...
view full answer... - Roof Vent Cover Recommendation for Ventline Ventadome Roof VentYou would need the standard MaxxAir Vent Cover part # MA00-933069 as a vent cover for the top of the Ventline E-Z Lift Ventadome # V3092-603-00. This cove allows you to leave the vent open even if there's rain and not worry about water getting in.
view full answer...
- Replacement Dome for Ventline E-Z Lift Ventadome Trailer Roof VentIf the Ventadome roof vent you have on your trailer has four mounting points then the replacement vent cover is part # BVE0108-03. This dome is designed to fit # V3092-601-00, # V3092-603-00, # V3094-601-00, # V3094-601-00C, # V3094-603-00, and # V3094-603-00C vents.
view full answer... - Replacement Vent for 1975 Layton Travel TrailerThe 14 inch x 14 inch vents you referenced are the standard size; what you'll need to do is cut the opening in your roof to fit a replacement vent. The Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-603-00, for example, will require a roughly 14-1/4 inch x 14-1/4 inch opening to fit. Doing this will allow you to use whichever vent you desire; I've added a link to our page with each of our vents for you to take a look at.
view full answer... - What to Measure to Determine Correct Replacement Trailer VentWhat you need to do is measure the size of the opening on your trailer's roof, which you can do be removing the vent as well as the garnish around the vent. If you did this and only got 13-3/8" x 13-3/8" I highly recommend simply enlarging your roof opening to what is now the standard size of 14-1/4" x 14-1/4" as there are no vents which will fit into a 13-3/8" x 13-3/8" opening. That way you can choose from a new vent that is powered like the MaxxFan Deluxe Roof Vent w/ 12V Fan # MA00-06401K...
view full answer... - Lid Replacement and Install for Ventline VentadomeV3092-603 Trailer Roof VentIf the lid on your Ventline roof vent looks like the Ventadome part # V3092-603-00 the correct replacement lid would be the part # BVD0449-A03 that you mentioned. To remove the damaged vent cover, remove the connection to the actuating strut, so the cover can tilt all the way upwards. To do this, you will need to remove the interior screen, the knob and the interior trim piece. Then, remove the two screws that hold the actuating arm in place, which will allow the actuating arm to be slid...
view full answer... - Replacement Cover for Ventline Fan in 2000 Dutchman LiteWe do have domes that are smoke colored with a continuous hinge, though they measure 14" x 14", the Ventline Replacement Vents # BVD0449-A03 and # BV0554-03. The best thing for you to do would be to turn your 13-1/2" x 13-1/2" hole into a 14-1/4" x 14-1/4" opening and replace your vents with new ones. A great choice would be the Ventline E-Z Lift # V3092-603-00 You'd need a garnish that depends on the length of your ceiling, either 2-1/8" # VA0445-34, 3-1/8" # VA0445-35 or 5-1/8" # VA0445-37. We...
view full answer... - Is Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-603-00 Made of PlasticThe Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-603-00 is made of all plastic with a few small exceptions like some of the hinge components. This would not have sweat issues in the winter like you described.
view full answer... - Desired Gray Roof Vent 14x14 for 2006 Haulmark TrailerWe only carry white roof vents as that is the only color available as a replacement option from our manufacturers. We have ceiling garnish in off-white, polar white, and birch white as well as white, but nothing in gray. I've linked the pages to assist, but I recommend getting an assembly like the Ventline # V3092-603-00 and simply spray painting the assembly gray to match your desired color.
view full answer... - Recommended Roof Vent Cover for a Ventline V3092-603-00The Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen # CAM40431 will fit a Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-603-00. I do have to mention that the # V3092-603-00 will be 9 1/2 tall, and the # CAM40431 is also 9 1/2 inches tall, so there will be some contact when opened all the way. However, this will not affect or damage either product.
view full answer... - How to Determine Replacement Handle for Roof VentMotorhomes don't have any type of list of specific replacement vent handles, so in order to determine the right one, you will need to know the manufacturer and style of roof vent on your motorhome. For example, if you have a Ventline Ventadome E-Z Lift you will need the Replacement Handle Assembly for Ventline E-Z Lift Ventadome Trailer Roof Vents # BVC0580-00. I have added a link below to our selection of replacement handles and operating parts for trailer vents for you to check out.
view full answer... - Replacement Roof Vent For Pop Up TrailerThe standard for RV/Camper vents is 14 inches by 14 inches. So the Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke # BV0554-03 will work. I would suggest the Ventline E-Z Lift Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - Smoke # V3092-603-00. For its easy use and locking handle. With older models it may be harder to find specific parts, if you measure the opening it should be 14-1/4x14-1/4 but they are all rough measurements since its the cut...
view full answer... - Is There A Larger Than Standard Roof Vent Offered For An RVRV roof vents like the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-603-00 all feature a standard opening of 14-1/4" x 14-1/4", and from flange to flange, this product measures 16-1/2" x 16-1/2". We do not offer any size larger for a roof vent like # V3092-603-00, only vent covers like # CAM40473 which measure 18"x18".
view full answer...
Do you have a question about this RV Vents and Fan?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality rv vents and fans for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate rv vents and fan information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Jameson C
Installed by:
Cole B
Written by:
Amy B
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.