Is this right for you? Product Expert Kathleen M says:
Yes, if you:
Get tired of twisting knobs and prefer opening the vent with the quick push/pull of a lever instead
Prefer a solid white lid that lets in light without the sun shining through and heating up your camper
No, if you:
Stay in areas with frequent rainstorms and worry about getting to the vent in time to close it before anything gets damaged
Have a 20' long or larger RV and need something with more oomph to pull more air out
This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent white, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately. Great Prices for the best rv vents and fans from Ventline. Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - White part number V3094-601-00 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
All Info
Reviews (145)
Q & A (0)
Related Parts
Photos
Why etrailer?
Ventline RV Vents and Fans
- V3094-601-00
Roof Vent
With 12V Fan
Vent
14W x 14L Inch
White
Manual Lift
Ventline
4 Inch
This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent white, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately.
Features:
Roof vent has a fan that pushes stale air out of your RV, camper, or enclosed trailer
Vent allows air to circulate while your RV remains locked and secure
12V DC, 8-blade, single-speed fan
On/off switch is mounted to vent
Fan rotates counterclockwise
Easy-to-use handle lets you quickly open and close the vent from inside your RV
Spring-loaded handle locks into 10 different positions
No gears - opens vent faster than a standard crank handle or hand knob
Ergonomic T-shape is easy to grip
Aerodynamic, wedge-shaped dome (or lid) is made of durable white polypropylene
Translucent dome allows some light through
Polar white screen snaps out for easy cleaning
Vinyl weather seal helps keep water out when vent is closed
Manual lift design
White, 1/4" thick mounting flange is built in
UV-resistant, long-lasting specialty polymer plastic construction
Smooth edges won't cut you during installation
Works well with all roofing materials
2-Wire design
Black wire is power
White wire is ground
Interior trim piece (or garnish) and installation kit sold separately
4 Mounting points on flange allow for installation of a vent cover (sold separately)
Made in the USA
Specs:
Rough opening size: 14-1/4" wide x 14-1/4" long
Overall dimensions (outside of flange to outside of flange): 16-1/2" wide x 16-1/2" long
Vent extends above roof:
4" When closed
9-1/2" When fully open
Overall fan diameter: 5"
Fan shaft diameter: 0.091"
Fan capacity: 100 CFM
Power draw: 1.2 amps
Limited 2-year warranty
Note: Not for use above tubs, showers, or range cooking surfaces.
Spring-Loaded Handle on Ventline E-Z Lift Ventadome
The easy-to-use handle on the E-Z Lift Ventadome lets you quickly open and close the roof vent from inside your RV. Unlike a standard handle or knob that can take time to crank, the handle on this vent is spring loaded. Simply pull on the handle and move it into one of 10 positions to open the vent. Each position offers a different degree of opening, and the handle locks into place. Also, the handle's T-shape makes it easy to grip.
Integrated Mounting Points for Vent Cover
There are 4 mounting points built into the flange of this roof vent. These points allow you to install a vent cover (sold separately) over the roof vent.
Installation Instructions
Note: Interior trim piece (garnish) and installation kit with screws and sealant are sold separately.
Mark desired location for vent. Be sure to choose a location between roof joists.
Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
Apply sealant to bottom of flange. Be sure to surround each screw hole.
Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
Mount to roof with #8 screws.
Remove screen frame to make electrical connections.
Connect to 12-volt DC power source.
Replace screen frame.
Attach interior garnish piece with #8 screws.
V3094-601-00 Vent Line Easy Lift Ventadome RV Roof Vent w/ 12-Volt Fan - 14-1/4" x 14-1/4" - White
Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - White - V3094-601-00
Average Customer Rating: 4.8 out of 5 stars (145 Customer Reviews)
This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent white, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately.
by: Kelly04/21/2017
Size was perfect. Installed easily, the handle for opening the domer is easy to use and works well.370339
by: Chuck 10/06/2021
The price was better than anyones and the spped of delivery was faster than promised.1173453
by: Gary Y09/11/2017
shipping of product was very good, product looks very good for the price. However won't be able to install them right at this time by the way I don't think a person could beat the good job of packaging.431240
by: Bill K07/20/2016
Just like displayed. Easy to install. Good value for the price274165
Comments
Still working great and has been used a lot. No issues.
Bill K - 07/20/2017
26369
by: Mary 09/08/2020
My contractor just installed the vent. He said it was an excellent choice! I am so happy to have one that works!!875850
by: Thomas 09/04/2022
1391901
by: Daniel 08/29/2022
1383318
by: Cindy 08/10/2021
1119696
by: William 06/03/2021
1054342
by: Nicole10/12/2022
1447407
by: Laurence 04/30/2021
1025708
by: Shaun 04/01/2021
999573
by: Melissa 11/11/2021
1200037
by: Todd 10/06/2022
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
I loved that they were shipped the next day and arrived as promised. My installer had no trouble replacing the old Roof Vent. It fit perfectly. And I love "Manual Lift" as opposed to the old "knob." I just wish the plastic was a little heavier or thicker. And to my surprise, the Roof Vent was not packaged in a box. It was simply included with the other part I ordered in the larger shipping box. No instructions or hardware. They weren't needed but surprised they weren't included.1440554
by: Amelia12/28/2022
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
I just received my roof vent, intact. It looks like it'll work, I just need to find someone who can install it.1490343
by: Robert 07/08/2022
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
If you have the OLD type of vent with an aluminum frame, you may have experienced that framework degrading over the years. This frame doesn't degrade and retains a good weather seal. Fantastic product!1322401
by: Gary09/09/2022
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Service was fantastic. Amy walked me through a change to my order and saved me having to place a second order, saved me extra shipping charges and was able to expedite the whole order. It was so great to have a real person to talk to and understand. Thank you Amy.1408561
by: Michael08/24/2021
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
love the EZ lift vent. etrailer is a pleasure to do business with. look no further for trailer parts, these guys are the best. pretty good install if I do say so myself.1133272
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Won't be adding power to it for a few months, fits like a glove on my 76 vw camper high top. The handle dosent like popping into full closed without being pushed upward so i don't know if the plastic teeth on the hight selector will wear out or break after several years of driving. I don't know how water resistant the fan motor is, i just get nervous when i see a metal cover on something that gets power and will get wet. Otherwise it looks pretty okay. I do like the solid spring loaded locking mechanism, it's pretty solid, and the handle looks stronger in person than in the pic, no worries about the springs not being able to keep the top locked into position. I plan on using it on a convention vehicle and there may be costumers so the handle profile might be an issue if you have super thick fingers or in costume.265057
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Received the package in the mail within a few days. Was ordered as a backup due to the fact that [retailer] sold me a camper that was missing the vent lid and nobody could come up with one. Had I read reviews of [retailer] sales prior, I would have avoided buying from them. Everyone was sold out of just the lids so I ordered the entire vent so I could have the lid.1315131
by: Jeff 08/28/2022
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Vent fit perfectly to replace our old fan and easy to install has held up well so far.1382147
by: Nancy07/26/2018
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
I have purchased these before. Although they are not a real high end product, they are a good quality and I really like the way they open and close. I replaced all my vents with these this time around. Plan on getting vent covers for them. Had no problems with past purchase. 546363
It is still going strong, and we have installed another roof vent in my own van in the later part of 2019. Pictures are still in the process of being uploaded with another review.
Dita M - 02/24/2020
70262
by: Scott L10/22/2022
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
All plastic use caution using after it sits in the sun a while1453733
by: Jim 08/26/2022
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Pretty nice piece. Went together pretty good( I am doing cargo/camper build.) Fan is quiet,when running.1376970
The Northern Breeze trailer vent has been discontinued, and as such there are very few replacement parts available now. Unfortunately the screen is a part that is not available.
While it is not what you wanted to hear, our only solution would be to replace the entire unit. These vents fit standard cut outs of roughly 14" x 14", so the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3094-601-00 (white) or # V3094-603-00 (smoke) would be a compatible replacement option. This would provide... view full answer...
Elixir is no long in business so replacement parts are extremely hard to find. I did some research online and was not able to locate a replacement fan blade that would work with the d-shaped shaft on your vent. Insead, the best option for you is really going to be to replace the entire assembly for which I recommend using the Ventline E-Z Lift Ventadome Trailer Roof Vent part # V3094-601-00C. This is currently the most cost effective option we have for you. It will fit the same 14-1/4"x14-1/4"... view full answer...
If the Ventadome roof vent you have on your trailer has four mounting points then the replacement vent cover is part # BVE0108-03.
This dome is designed to fit # V3092-601-00, # V3092-603-00, # V3094-601-00, # V3094-601-00C, # V3094-603-00, and # V3094-603-00C vents. view full answer...
We do have a fan that may be just what you are looking for.
I recommend the Fan-Tastic Vent Roof Vent w/ 12V Fan, part # FV801250. This fan is a manual lift and has a reversible 12V fan. The fan has 3 speeds to let you control the air flow and a hand-operated knob that lets you open and close the dome. This fan also has a pop-out screen for easy cleaning which could come in handy with the grooming business.
The rough opening size needed for this vent is 14-1/4 x 14-1/4 inches and it... view full answer...
You will be able to use Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - White Item # V3094-601-00 on your 2004 Jayco Eagle as long as the existing hole for a vent is roughly 14-1/4 inches square. If your opening is a different measurement let me know.
The vent does not come with installation hardware so I also recommend# 344270KITW for an installation kit. I have linked some videos of these parts for you. view full answer...
The bug screen # BVE0106-00 for your Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan # V3094-601-00 just snaps into place so you can remove it by pulling it down from its edges. I've attached a video where you can see it being installed for reference. view full answer...
For your Ventline E-Z Ventadome Trailer Roof Vent # V3094-601-00, the correct replacement fan blade is the Replacement Fan Blade for Ventline E-Z Lift Ventadome Trailer Roof Vents # BVE0114-00. view full answer...
I have a solution for you, but unfortunately I was not able to cross reference part number I87999 on the old Ventline motor, and my Ventline contact did not have any luck either. Due to this, and due to the fact that your fan is almost 30 years old, I would recommend just replacing the entire vent assembly at this point.
For this, I would go with Ventline Roof Vent w/ 110V Fan - Manual Lift - 14-1/4" x 14-1/4" White # V2128SP-01 if your RV is still using AC power for the fan motor. If... view full answer...
Yes, the Ceiling Garnish part # VA0445-25 that you referenced would fit the Roof Vent Fan part # V3094-601-00 that you also mentioned.
This garnish fits roofs that are 7/8 inch to 2-1/4 inch so it would work well on yours that is 7/8 inch. view full answer...
The Northern Breeze trailer vent has been discontinued, and as such there are few replacement parts available now, and that includes the screen. While I know it is not exactly what you wanted to hear, the best option available is to replace your Northern Breeze vent.
The good news is that these vents fit standard cut outs of roughly 14" x 14" and are economical of you go with the simple manual-crank vent.
For that I recommend checking out the Ventline Ventadome Trailer Roof Vent # V2092SP-28.
Or... view full answer...
Yes, The MaxxAir II Vent Cover, # MA00-933072, comes with the Zero-Leak hinge brackets and all of the mounting hardware to install it on the E-Z Lift Ventadome vents from Ventline like # V3094-601-00. The installation is identical to the way that the original MaxxAir Vent Cover installs, so, I've provided a video of the original MaxxAir installation for you to view.
The larger MaxxAir II Vent Cover has more open louvered area which provides more fresh air than any other vented cover.... view full answer...
First thing we gotta do is identify the roof vent lid you need. Which to do that you need to look at the hinge setup of the vent and the shape of the lid. I attached a picture that has a few different common styles. If you can check the picture out and compare to the vent assembly on your trailer we can determine what you need and from there determine the install.
I also attached a link to a page that has all of the vent lids we offer as well. view full answer...
Really good questions, and let's start with securing the Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - White # V3094-601-00.
You are correct about the holes, as those are screw holes for the vent; then you'd use butyl tape and sealant to complete the install. You can get the full install kit with the Roof Vent Installation Kit # 344270KITW.
As for the ceiling garnish, it is required for the installation of the Ventline E-Z Lift # V3094-601-00. The vent has a... view full answer...
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
Most detailed, accurate rv vents and fan information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.
Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.