Maintain your RV's black tank with this surface mounted tank flusher water inlet. Use a city water hose with the open brass valve for a more effective cleaning process. Removable screen filter keeps debris out. 1/2" MPT water connection.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors. Steven here with etrailer.com. Today we're looking at our B and B RV City Water Inlet for your Flusher with the Flange Surface Mounted and a Brass Valve. Now folks, this is gonna be the polar white version. And basically this will give you a city water inlet for direct flushing of your wastewater black water tank. It does use a standard water hose thread in here in the front for a faster, more effective cleaning process.
And you've got your standard half inch NPT, or male pipe threads, and the nice brass pass through valve. So again, this is a pass through valve. It's just letting the water go straight through. It's not a check valve, and it's highly effective when it's used in conjunction with the B and B Flusher Sprayer Heads that are mounted on your tank. It is made in the US.
The cutout requirement is gonna be one and a half inches wide to give you plenty of space to put that through. The flange diameter overall is three inches, and the valve depth itself is one and 11 16ths. They're gonna give you three included screws for mounting. They're painted it white already to match, and you get a nice roll of butyl tape If you're not familiar with this stuff, butyl tape is basically a waterproof, like a putty, consistent. It's kind of squishy.
You basically put that on here before you install it. You install it, put the screws right through the holes, through the tape, into the mounting surface on your RV or camper, and it creates a nice, watertight, weathertight seal there. Now, 'cause this is brass, it's gonna reduce the corrosion risk from flushing and disinfecting and all that stuff that you're doing with it. So very nice product. You got the cap here that's already built in, so it's not gonna fall off or lost.
You got the built in screen and the black gasket there, so a nice connection point. Very nice product by B and B. Again, this is the B and B RV City Water Inlet. I'm Steven. Thanks so much for watching.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.