B&B RV Water Center - City Water and Gravity Fill - Brass Check Valve - Key Lock - Polar White

Video Transcript for Review of the B and B RV Water Center

Hi, everybody. Andy here with etrailer.com. Let's take a look at this B&B City Water and Gravity Fill Inlet Panel. Now this dual fill, water inlet panel is going to let you update your RV's worn fresh water inlets. And before we go any further, let me go ahead and give you some measurements just so you can be confident this is going to be the one that you need. We do have other sizes available here at etrailer.com.

So, taking a look at the outside width, we're sitting at about seven and a half inches wide. The outside height about six and a half inches tall. Then taking a look at the cutout dimensions, looking at the width, we're sitting at about five and three quarters inches wide. And then the height looks like we're right about four and three quarters inches tall. And then the collar depth, an inch and a half it looks like.

Now the gravity fill opening and spout is going to let you fill your fresh water tank. This uses a barbed connection, and as you can see here, the barbed connection here on the inside, you have two sizes there, one and three-eighths inches, or one and a quarter inches for your hose of the tank. And then this twist on cap is going to hold securely to keep the fill clean and prevent water loss. So, very easy to open and close. Just give it a twist and then it'll secure in place.

The city water inlet is going to connect to a drinking water hose for pressurized connection at home or at the park. And the brass check valve is going to keep pressurized water from back flowing. And you can see the check valve there in that brass fitting. This is a half-inch MVT fitting. It's going to connect to a threaded hose.

And the rubber plug here is going to fit right into that opening, that inlet very securely. So, it's going to do a great job of sealing out dust, dirt, and grime. We also have an air vent here at the bottom. You can see that there. And that's gonna help balance air pressure for smooth water flow. You're just going to attach a three-eighths of an inch tube to that. And that is not included with this, but you can pick that up separately. It does come with one key to allow you to lock this door. And then another nice feature this has is, you have this little access panel or access door here. So, you can run a hose through there, close it, and lock it. And then you're not gonna have to worry about someone opening that up and getting access to your hoses, even with that access door open. And then that can just rotate back into place, and it'll sit flush. So, nice feature there, very easy to use. This is NSF, IAPMO, CSA, and TEI certified. This is constructed of durable plastic, UV stabilized plastic. So you're not gonna have to worry about this yellowing. It's going to resist salt and impacts. It's gonna hold up really well for you. And it does include everything that you see here on my table. Well, I think that's going to wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.