bing tracking image
  1. RV and Camper Hitch
  2. CURT
  3. Bumper Mount Hitch
  4. 4 x 2 Inch Bumper
  5. Bolt-On
  6. 350 lbs TW
Curt RV Bumper Hitch - 2"

Curt RV Bumper Hitch - 2"

Item # C19101
lowest price pledge
Our Price: $69.16
RV and Camper Hitch
Orders above $99 qualify for Free Shipping
Shipping Weight: 13 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Lowest Prices for the best rv and camper hitch from CURT. Curt RV Bumper Hitch - 2" part number C19101 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (45)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT RV and Camper Hitch - C19101

  • Bumper Mount Hitch
  • 4 x 2 Inch Bumper
  • Bolt-On
  • 350 lbs TW
  • 3500 lbs GTW
  • 2 Inch Hitch
  • CURT


Features:

  • For RV bumper use only
  • Fits 2" x 4" RV bumpers
  • Receiver size: 2"
  • Maximum gross trailer weight: 3,500 lbs
  • Maximum tongue weight: 350 lbs
  • Overall dimensions: 9-1/2" long x 7-3/4" tall x 6" deep
  • Distance between the outer edges of the mounting bracket: 2-11/16"
  • Distance between the inner edges of the mounting brackets: 2-11/64"
  • Limited lifetime warranty


Dimensions 1

Dimensions 2

Notes:

  • For use with RV-approved accessories only.
  • This hitch does not work on C-channel bumpers.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



19101 CURT Class II Trailer Hitch Receiver

Installation Details C19101 Installation instructions




Customer Reviews

Curt RV Bumper Hitch - 2" - C19101

Average Customer Rating:  4.7 out of 5 stars   (45 Customer Reviews)


by:

Heavy duty. Excellent price


Comments
Awesome heavy duty mount. Used on the back of our food trailer to hold a cargo box. Works perfectly
Pat - 06/07/2022

by:

I hate to admit that the hitch has not moved one inch from where it was installed. Of course that may be entirely because the trailer it's mounted on has not either... I have no doubt it will perform perfectly when called upon to tow the the small aluminum row boat that will be attached to it. Thanks for the follow up and we'll be sure to keep you all informed of future adventures. RTC, Micheal/China Syndrome survivor.



by:

Super fast service and great product!



by:

A quality bit of kit. My only problem is the burly box steel bumper on my 1990 LJ78 Land Cruiser is 2" X 4 1/8", apparently, not 2" X 4". So the nice bolts and nuts included in the package don't quite go through the holes at the top. I had to substitute thinner eye bolts. I'm pulling a very light canoe trailer with this, so I'm not worried about the loss in strength. If you have a real cross frame member for a bumper, as I do this is an inexpensive light towing solution. I would have rated it excellent if the bolt holes were somehow adjustable up and down.



by:

We had an interesting choice to make with our RV. We could either take the cargo carrier or the bikes. We wanted both, of course, and this hitch gave us that option.
We always check with etrailer.com first for any parts they might have to meet our travel needs.



by:

Just received this product, so haven't really used it yet. But wow, it is really built well. I looked at numerous similar products, and am really happy with my choice. Should give us years of great service. May be overkill for a bike rack on the back of our Takena Trailer, but will most assuredly give us peace of mind on our long road trips.



by:

Very nice specialty receiver for 2" Reese Hitch. Fits on 4" x 2" bumper stock - dimensions are spot on. Finish on surface and edges is smooth...nothing to catch or "bite" during installation!

Thank you



by:

Very good quality but I had to send back as I ordered the wrong bumper size. They were very helpful with making the return easy. I was sent a shipping label.by text and sent it back. Just waiting for my refund. All items I have bought have been of good quality and not high priced. Very Happy.



by:

Used for a rear hitch on my 5th wheel to tow the jet ski trailer. Very sturdy.



by:

video information was a big help, it eliminated guesswork on my application. fit & finish were excellent & my parts arrived on time.
I will buy from etrailer again.



by:

Product wa exactly what I needed. Shipped out the same day and arrived right in time! Thank you etrailer.com!



by:

Bought it for a heavier hitch for my 2000 Polaris Ranger 6x6 and it worked excellent. Just one minor adjustment and it fit like a glove. etrailer is the way to go, will be buying more from them for my new to me 2009 Ford E350 ambulance that I will be using as a tow vehicle for my travel trailer.



by:

Well made, easy installation, fast delivery.
Simple
instructions to follow no drilling required.

Great folks to do business with, can not go wrong using this company.



by:

Easy to install and well built. Bigger than I needed to mount our current bike rack to our Camp Lite 11FK, but works great and it was simple.



by:

Wrong product - and no help from etrailer.com in rectifying the situation! I don't think anyone could use this product, and it's not clear enough in the information that it's for a tiny bumper - not a regular RV bumper.



by:

Once I have item's installed Ill be able to give an awesome review.



by:

etrailer makes ordering parts very easy - always impressed with customer service I get.

The bumper hitch is sturdy, and fit my 2" x 4" trailer bumper perfectly. it is a well built product and is very stable on the bumper.



by:

I have receive the right one and I'm real happy with it I will tell everybody ware I bought it I'm vary satisfied thank you


Comments
I love it recommended everyone that notices it
Mike k - 02/05/2018


by:

Extremely happy with the product however very disappointed that it took almost a month to get said product which was in stock since I placed order on April 27th,2021.



by:

Very sturdy. We use it to hold a bike rack on our trailer.



by:

5 Star Service every time. I put my order in yesterday before noon and it was on my doorstep today before noon. I will recommend etrailer to everyone!!! Thanks Again!!!!



by:

The hitch came on time. Etrailer stayed in touch with me. I am sure it will work great for pulling my flat bottom boat. Have to wait for winter to get over with.



by:

Heavy duty, well made, great price and very quick delivery.



by:

Have purchased 2 off these and the service is great, fantastic product as well.
Sandy & Adrian



by:

Arrived in a timely fashion. Even sturdier than I had expected. Fits my trailer bumper well. I am very satisfied with this product.


25
45
Show More Reviews

Ask the Experts about this CURT RV and Camper Hitch



  • Can the Curt Bumper Mount Trailer Hitch # C19101 be used Upside Down
    You can certainly use the Curt Bumper Mount Trailer Hitch, # C19101, upside down. I spoke with my contact at Curt to see if there were any restrictions or further limitations by using this hitch upside down and he told me that you will have no problem using it that way. The capacities of the hitch will stay the same and you can gain more ground clearance for your cargo carrier (which can be a big deal at the back of RVs and trailers).
    view full answer...
  • How Far is it From the Mounting Holes to the Receiver on Curt RV Bumper Trailer Hitch 19101
    I went out to the warehouse and pulled Curt RV bumper hitch # C19101 to take the measurement you need. From the bottom of the top set of mounting holes down to the top of the receiver is 4-1/16 inches. I have included a picture showing the measurement I took, a link to the instructions, and a link to a video review.
    view full answer...
    Image 1 for
  • Will the Curt RV Bumper Hitch # C19101 fit a 1990 Coleman Newport
    If your 1990 Coleman Newport has a 2 inch steel square rear bumper yes, the Curt RV Bumper Hitch # C19101 would work well for you. I attached a review video for this hitch for you to check out also.
    view full answer...
  • Recommended Trailer Hitch for Fifth Wheel Trailer to Tow a Second Light Weight Trailer
    We generally do not recommend towing a trailer with a trailer. It is illegal in many states, so you will want to check with the DMV in any state you travel through. Also you will want to check with the manufacturer of your fifth wheel to see if the bumper on your trailer is designed to support any additional weight due to its construction. Some fifth wheels are, and some aren't. That said, it sounds like you may have a 4 inch continuously welded steel RV bumper so you can use the Curt...
    view full answer...
  • Dimensions of Curt RV Bumper Hitch C19101
    Good news! I can help you get the dimensions of the Curt RV Bumper Hitch. I was able to go out to our warehouse and measure the following for the # C19101: Overall width is 9-1/2 inches Overall height from the bottom to the very top is 7-3/4 inches Overall depth is 6 inches Distance between outer edges of bracket 2-11/16 inches Distance between inner edges of bracket 2-11/64 inches I have attached an image of these measurements to this page for your convenience.
    view full answer...
    Image 1 for Image 2 for
  • Bolt Hole Spacing for Curt Bumper Mount Trailer Hitch # C19101
    On Curt bumper mount trailer hitch # C19101 the mounting holes are approximately 6-1/2 inches apart on center. I have linked a video review of this hitch for you.
    view full answer...
    Image 1 for
  • Does RV Trailer Hitch for 4" x 2" Bumper Allow Towing
    You can use the Curt RV Bumper Hitch # C19101 to tow your trailer and Polaris Razor, but you do need to ensure you are within a number of capacities. The hitch itself has a 3,500 lb towing capacity and 350 lb tongue weight capacity so your trailer needs to fall within those numbers. Additionally, you need to contact the manufacturer of your toy hauler to ensure the bumper can handle towing as it may not be designed for that much stress. This could lead to a very dangerous situation for...
    view full answer...
  • What Size Frame Does Curt hitch # C19101 Fit
    The frame of your travel trailer would need to be 2 inches wide and 4 inches tall for the Curt hitch part # C19101 to attach to it. I am not totally sure how you would be using the hitch so this is probably not something we can safely guarantee will work.
    view full answer...
    Image 1 for
  • Distance From Top Mounting Holes to Top of Curt RV Bumper Hitch C19101
    We were able to measure the distance for you from the top mounting holes to the top of the very top of the Curt RV Bumper Hitch # C19101. As you can see by the accompanying diagram, the distance from the bottom of those mounting holes to the top of the hitch measures 1-1/8 inch so you will have enough clearance for the hitch to be installed without any interference. I have added a link below to a video review for you to check out as well of the Curt RV Bumper Hitch # C19101.
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch For Jayco Hayfeather X17Z Trailer
    A spacer may be used to take up the gap you would need, but with your bumper at 4-3/4 inches tall, it would prevent part # C19101 from being installed on it because the distance from the tube to the mounting holes measures 4-1/16 inches. I do not recommend drilling into the bumper to accommodate the mounting holes for part # C19101. I recommend the Curt Adjustable Hitch, part # 13703 as long as the width of your trailer frame is between 22 and 72 inches. I have attached a link to an...
    view full answer...
  • Hitch Recommendation for a 2005 Jayco Feather 26BH Travel Trailer
    A spacer could be used to take up the extra bumper width you would need, but the fact that your bumper is 4-1/2 inches tall would prevent the # C19101 from being installed on it as the distance from the tube to the mounting holes is 4-1/16 inches. The best recommendation I could give you would be the Curt Adjustable hitch part # 13703 as long as the width of your trailer frame is between 22 and 72 inches. I attached an install video for you to check out as well.
    view full answer...
    Image 1 for
  • 2006 Jayco Feather Sport 17 ft Trailer Hitch Option
    I looked up pictures of your 2006 Jayco Feather Sport 17 ft trailer and I couldn't find any pictures of a rear square bumper. The best option I can offer is the part # 13703 which can fit frame width of 22 to 72 inches that are I beam, C channel or boxed. You will need to go with an RV rated bike rack though like the ones available at the attached link.
    view full answer...
  • Could Curt RV Hitch C19101 Be Used to Flat Tow a Vehicle
    There's not reason the Curt hitch # C19101 couldn't fit the rear bumper of your 2020 Crossroads Sunset and be used to flat tow a vehicle as long as it weighed less than 3,500 lbs.
    view full answer...
  • Recommended Trailer Hitch Receiver for Jayco Lite with Rear Bumper Measuring 1.5 Inches by 5 Inches
    We don't have anything that is a precise fit for your 5 by 1-1/2 inch bumper. The closest thing we have is the Curt RV Bumper Hitch # C19101 which will require drilling and a spacer for fit. You will be operating outside of the manufacturer specs so you won't get the warranty with this application. A better option is to use the Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 which will attach to your frame and give you the stability and strength you need...
    view full answer...
  • RV Bumper Mount Trailer Hitch Receiver for 2 by 2 Inch Bumpers
    I verified with Curt that the RV Bumper Hitch # C19101 can be used on a 2 by 2 inch bumper. Since you're not going to be using the hitch for towing you'll also need the support strap # 18050. It's required for all non-trailer loads on the hitch per Curt's warranty.
    view full answer...
  • Recommendation For A Hitch For A 2017 Heartland Cyclone 5th Wheel Toy Hauler
    We have both frame-mount and bumper-mount hitches for your 2017 Heartland Cyclone 5th Wheel Toy Hauler and I have attached a link to our available inventory. Generally, Frame-mount hitches like the Curt Adjustable Trailer Hitch Receiver, Item # C13701, offer higher capacity than the bumper-mount variety like the Curt RV Bumper Hitch, # C19101. The Curt Adjustable Trailer Hitch Receiver has a Class III rating and can be bolted or welded on. It works with frames with a minimum width...
    view full answer...
  • Recommended Trailer Hitch Receiver for 1962 Aloha Trailer with 3x1.5 C-Channel Bumper?
    There isn't a bumper mount option for that 3 x 1.5 inch c-channel. Instead you will need to use a frame mounted hitch like the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" # C13701. This is a bolt on option that will work with Box frame, C-Channel frame, or I-Beam frame.
    view full answer...
  • Whats the Difference Between Curt Hitch E-100 and C19101
    The difference between the Curt RV Bumper Hitch # C19101 and the Curt RV Bumper Hitch # E-100 is the application. If you have a 4 inch square bumper you would want the # E-100, if you have a 2 inch x 4 inch rectangular bumper you would want the # C19101. If you check out the pictures I attached you can see how the mounting plates are different distances apart.
    view full answer...
    Image 1 for Image 2 for
  • Trailer Hitch Receiver For Carrying Bike Rack on Back of Pop-Up Camper
    Although we do not have a 1-1/4 inch bumper mount receiver, you can simply install a 2 inch hitch and then use a hitch reducer like part # HT02. This will allow you to use your bike rack with its 1-1/4 inch shank, and the reducer won't have any effect on the hitch's capacity. I'll link you to the 2 inch receivers we offer that might be compatible with your pop-up. Many of them can be mounted to a 2 or 4 inch rear bumper, but some of the hitches have particular styles of bumpers they're...
    view full answer...
  • Can the Curt Hitch part # E-100 be Mounted Above Bumper
    There's no reason you couldn't install the Curt Hitch part # E-100 with the hitch opening above the bumper. I spoke with my contact at Curt to see if there were any restrictions or further limitations by using this hitch upside down and he told me that you will have no problem using it that way. I attached a review video for this hitch for you to check out as well.
    view full answer...
  • Hitch Availability for a 2015 Forest River Gray Wolf 19RR Toy Hauler
    I have a solution for you, but the Curt Hitch part # C19101 that you referenced is designed to fit 2 inch wide by 4 inch tall bumpers or frames. I can't safely recommend it for a 2 inch by 7 inch frame. A multi-fit hitch would be a better option. If the frame rails that run down the length of your trailer on either side are between 22 and 72 inches apart the Curt Hitch part # 13703 would be your best option. I attached an install video an installation instructions for you to check out...
    view full answer...
  • Availability of Trailer Hitch to Fit Bumper of 2016 1706 Viking
    Go look at the bumper you have at the rear of your 2016 1706 Viking. What are the dimensions of it? Is the bumper welded all the way around or is there an open side? If there is an open side you have a C-channel bumper which the # C19101 would not fit. It would need to be a 2 inch wide by 4 inch tall continuously welded bumper for this hitch to fit. If instead it is 4 inch by 4 inch you would want the part # E-100.
    view full answer...
  • Can a Trailer Hitch be Installed on a Dune Buggy
    We have several different universal-type of hitches but none specifically for 1-1/2 inch steel tubing (which I assume is round tube). The best solution for you is going to be to have a receiver tube, # E-9, welded onto the tubing by a professional welder. It would probably take about 5 minutes to weld on and I am certain they would not charge much for this installation. Welding services can be found all over. Check your local Yellow Pages (if they still exist) for welders, machine shops,...
    view full answer...
  • Curt Trailer Hitch Recommendation for Fitting Bumper at Rear of Camper
    We have trailer hitches from Curt that are designed specifically for attaching to a camper's bumper. If the bumper is 4 inch by 4 inch we have the part # E-100. If the bumper is 4 inch by 2 inch we have the part # C19101.
    view full answer...


< Previous
123. . .4



Do you have a question about this RV and Camper Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv and camper hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Adam E
Installed by:
Adam E
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924