bing tracking image
  1. RV and Camper Hitch
  2. Draw-Tite
  3. Frame Mount Hitch
  4. 47 - 71 Inch Wide Frame
  5. 3500 lbs GTW
  6. 300 lbs TW
Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide

Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide

Item # 82201
Retail:$629.98
Our Price: $405.19
You Save: $224.79
RV and Camper Hitch
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Adjustable trailer receiver hitch designed for use on RVs can be bolted to the vehicle frame or welded on for a no-drill application. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best rv and camper hitch from Draw-Tite. Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide part number 82201 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (63)
  • Q & A (0)
  • Videos (1)
  • Photos

Draw-Tite RV and Camper Hitch - 82201

  • Frame Mount Hitch
  • 47 - 71 Inch Wide Frame
  • 3500 lbs GTW
  • 300 lbs TW
  • Bolt-On
  • 2 Inch Hitch
  • Draw-Tite

Adjustable trailer receiver hitch designed for use on RVs can be bolted to the vehicle frame or welded on for a no-drill application. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Motorhome (RV) hitch
  • Trailer hitch has 2" x 2" receiver opening


Specs:

  • Frame brackets are adjustable to fit a variety of frame widths
    • Adjusts from 47" to 71" wide
  • Weight capacity:
    • 300 lbs Tongue weight
    • 3,500 Gross towing weight
  • Dimensions:
    • Max center to center bolt hole width: 68"
    • Flange holes front to back: 8-1/2"
  • Limited lifetime warranty


Note: This is a general application product, and it is the responsibility of the installer to select a structurally safe location for attachment. For use with RV-approved accessories only.



82201 Draw-Tite Multi-Fit Motor Home RV Hitch

Installation Details 82201 Installation instructions



Video of Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Draw-Tite RV and Camper Hitch - Adjustable Frame Mount Hitch - 82201

Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this Draw-Tite adjustable two-inch motor home trailer hitch. Now, this is an adjustable trailer hitch receiver. It's designed for use on RVs. It can be bolted to the vehicle frame or welded on for a no-drill application.

Basically, these frame brackets right here on the very end, they are adjustable to fit a variety of frame widths. If you unbolt it right here, you're able to slide those brackets to whatever position you need. They just slide along the cross tube to fit your application. They will adjust anywhere from 47 inches all the way out to where they are now at 71 inches wide. This is a nice, black powder-coated steel construction.

It's very sturdy and corrosion resistant.Now, the trailer hitch itself has a two inch by two inch receiver opening. If you notice right here, they do include the holes for your safety chain hookups to attach to. It does also include this mounting bracket right over here. That allows you to install your trailer's electrical connector to it. It does come with everything shown here, all the mounting hardware you need with a nice set of detailed instructions.Now, this is for use with RV approved accessories only.

Weight capacity on this is 3,500 pounds. Tongue weight capacity is 300 pounds. Last thing I want to do is give you some dimensions on this. So if we measure right now, I have it in the furthest position. So if we measure the overall maximum overall width from outside to outside, it's right at 71 inches.

From the mounting holes, center to center, it's right at 68 inches. And then the mounting holes front to back center to center, right at eight and a half inches. Now, one note on this, this is a general application product, so the installer needs to select a structurally safe location for attachment of this hitch. But that should do it for the review on the Draw-Tite adjustable two-inch motor home trailer hitch.

Customer Satisfaction Score:


Customer Reviews

Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide - 82201

Average Customer Rating:  4.8 out of 5 stars   (63 Customer Reviews)

Adjustable trailer receiver hitch designed for use on RVs can be bolted to the vehicle frame or welded on for a no-drill application. Powder coated steel is sturdy and corrosion resistant.

by:

We bought this hitch so we could carry our two E-bikes on the tail end of our travel trailer. Mounting the hitch to our Rockwood trailer took some thought and effort, but it all worked out. We also bought a Swagman E-Spec bike rack, a Curt 14" hitch extender and a Malone Anti-Rattle hitch lock from etrailer. The combined weight of our two e-bikes, minus the batteries is about 108 pounds. Everything together, along with the support I made for the hitch extender, to take the bounce out of the whole system, works great!



by:

Fits perfectly everything works great to add bikes to back of travel trailer. Only complaint is that hitch was not shipped in box. Delivered with paint chips and scratches.



by:

Amazed at how quick etrailer had the hitch at my doorstep! Very satisfied!



by:

Hitch did bolt right up to the existing bracket that was welded to the frame on a 2016 keystone fuzion toy-hauler . Only notification was to move the license plate light approx 1 1/2 inch on bumper. There’s a fine line on moving the light because if you move it to high the ramp door will crush it !
Works great



by:

Still glad I purchased this receiver. It held up great on the back of our travel trailer and will be moved to our new fifth wheel soon. I would recommend this product.



by:

I installed (welded) this hitch about a year ago into the frame on our 24' TT. The mount is very solid and has performed flawlessly on multiple hauls (we sometimes trailer a SXS behind our TT). I incorporate a sway-bar whenever we pull the SXS trailer behind the TT for safety. This hitch is a good concept, very heavily built and easy to customize and install with basic metal working skills (cutting/grinding/drilling/welding), depending on your trailer/RV frame. I can highly recommend this hitch if you're looking for a way to tow behind your TT. Please remember to check your tongue weights and use anti-sway devices for your safety and the safety of your fellow motorists. Happy Motoring!



by:

Etrailer is my favorite online store for projects like this. This hitch is exactly what I was looking for at a reasonable price. I’ve added this hitch to a KZ fifth wheel camper. Install was tricky on the camper due to the stabilization jacks in the way but not the fault of the hitch at all. weld or bolt on option. Based on other reviews I went with weld on.



by:

Easy install! Perfect fit and a great way to haul a bike or utility rack safely behind a travel trailer.



by:

Just what I needed. Easy install. Works great.



by:

Received this hitch faster than expected! The instructions provided made installation easy. The on-line dimensions provided made my purchase decision easier and confirmed it was the only hitch that would fit my 5th wheel camper. I have purchased other products from etrailer.com in the past and will not hesitate to do so in the future! Great company which takes customer concerns seriously!



by:

Great fit on 21 twilight 30, trailer. Moved stabilizer back 15” and mounted at end of frame. Make it easy and buy a good hardened 1/2” bit and mounts fast. Good floor jack helps a lot.



by:

It was an easy install. I would recommend welding it in which is why I plan to do. Flexes too much just being bolted up.



by:

Great product, nice and sturdy! I pull a small trailer behind my 5th wheel and it works great!!



by:

I recently ordered a hitch to put on the back of my 5th wheel trailer. The website is great and I was able to find exactly what I needed. Product was just as expected other than it got there sooner than I anticipated!!



by:

This was the only product I found that met the need for installing on the back end of my 5th wheel trailer. It was an easy install and will meet the need of pulling a small trailer behind the RV.

Terry K.

1/11/2016

Dan B:What brand of fiver is yours? I have a Rockwood Ultra lite. Model 8289 WS . Wondering if this will fit my unit.Terry K.

Dan B.

1/13/2016

Terry, I have a Keystone Cougar X-lite and it has a box tube extension off the bottom and end of the I beam frame. I was able to through bolt to box tube and reinforce with spacers. It reduced my ground clearance and eventually had the tube bumper raised so the hitch could be raised. It will take some fab if this is your situation as well.



by:

Insert Tube did not extend to back of fifth wheel. I needed to buy a 12"extension. Issue with this is its another pinned joint with slop. I had to weld it for stifness. Also, adds



by:

Pretty happy overall, easy to install, looks good, very solid. Was missing two
Nuts and lock washers, no big deal I had some. Shipped very fast and was a
Good price.

Matt

6/3/2020

Still great, my jet skis havent fallen off my toy hauler!



by:

Hitch fit my application perfectly. Very little trouble with the install. For my application (a 36' fifth wheel travel trailer with I beam frame), reinforcing plate should have been about 3/16" narrower. I trimmed them and they worked great. They might have been fine for a channel or box frame without trimming. Drilling the hole for the bolt in the I beam closer to the edge of the beam did not seem like a great idea, but might have worked okay. I am pleased with the product and the service. Thanks.



by:

I ended up removing the bumper on my 5th wheel and welding the hitch. Was a Perfect fit



by:

Well built like that it is adjustable to install on applications



by:

Order shipped and was delivered fast and accurately. Great service once again. Never disappointed. Thanks.



by:

Item as described with easy install



by:

The receiver hitch was exactly as I had expected. The end brackets allowed for side or vertical mounting. I used the side mounting method so i had to cut off one and one sixteenth inch from each end. This is easily done with a band saw. Then I drilled holes in the sides of the mounting brackets to match existing side mount plate. A two hour job due to rain.



by:

This item was perfect for our use. Of course, my husband made a few changes when he attached to the RV to make it really solid. He was very pleased with the hitch. We had to purchase an extension piece to clear the attached ladder on the RV but all is good.



by:

Solid unit which bolted right up to the I beams on my 5th wheel frame. It does take a bit of work and drilling to get it installed, and its heavy so get a friend to help hold it in place while you measure and install.


25
63
Show More Reviews

See what our Experts say about this Draw-Tite RV and Camper Hitch

  • Replacement Hitch for RV on 2019 Ford E-350 Chassis
    If the frame on your RV on a 2019 Ford E350 chassis is between 47" and 71" wide, you can use the Multi-Fit Motor Home Trailer Hitch # 82201 to replace the existing hitch. This is an adjustable hitch designed to sit between the frame members on your chassis and will provide you with a 2" hitch receiver. This hitch can be bolted on to both existing or drilled holes in the frame or welded on, for a no drill application. I've also linked our other available selections that might work in case...
    view full answer...
  • Recommended Trailer Hitch for a 2002 Dodge 2500 Roadtrek 170
    Robert, we don't have tow bumpers for your 2002 Dodge 2500 Roadtrek 170, unfortunately. What you could do instead is install a hitch like the Multi-Fit Motor Home Trailer Hitch # 82201 and slap a ball mount in there # DT49MR and you'd be all set. This is a multi-fit hitch that has a 3.5K capacity and can adjust anywhere from 47" to 72" wide, so you'd just need to measure your frame width to verify.
    view full answer...
  • Recommended E-Bike Rack And Trailer Hitch For A 2020 Rockwood 2109S Travel Trailer
    The reason the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes # HLY64FR is not rated for use with a travel trailer is due to the fact that it is not designed to withstand the additional forces that are exerted on the rack in that application. With that being said, I recommend going with the Swagman E-Spec Bike Rack for 2 Electric Bikes - 2" Hitches # S94FR. This bike rack is capable of hauling two e-bikes weighing 70-lbs each, and will work great with your 2020 Rockwood 2109S. For...
    view full answer...
  • Hitch Tube Length of Draw Tite Hitch # 82201
    The hitch opening of the Draw Tite hitch part # 82201 that you referenced measures 6 inches from the main cross tube.
    view full answer...
    Image 1 for
  • Trailer Hitch Receiver Recommendation for a 2021 Winnebago Micro Minnie Travel Trailer
    Hitch receivers for trailers are more universal since each trailer is different so for your application I recommend checking out the Multi-Fit Motor Home Trailer Hitch # 82201 which can be bolted or welded on to a trailer frame that is 47" - 71" apart. You'll need to verify if this works for your specific trailer application or not by measuring between your trailer frame. If you don't already have a bike rack then I recommend checking out the Lets Go Aero V-Lectric FAT PRO Bike Rack #...
    view full answer...
  • Trailer Hitch and Bike Rack for a 2016 Winnebago Voyage Fifth Wheel
    The Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide item # 82201 is going to be our highest capacity hitch for your Winnebago Voyager. It has a 3,500 lbs towing capacity and a 300 lbs tongue weight. You will want to verify the capacity of your 5th wheel and tow vehicle to ensure they can handle the additional weight of a boat trailer. For a bike rack, I recommend the Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers - Frame Mount item # S64663. The Traveler XC2 is...
    view full answer...
  • Hitch Class of Multi-Fit Motor Home Trailer Hitch 82201
    The Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide # 82201 is a Class III hitch so you will be good to go with the system your referenced as long as it falls within its capacities. It has the 2 inch receiver opening you need and is rated for 300 lbs tongue weight and 3,500 lbs towing capacity.
    view full answer...
  • Dimensions of Multi-Fit Motor Home Trailer Hitch, # 82201
    The Multi-Fit Motor Home Trailer Hitch, # 82201, has an overall height of 5-5/8". Please note the attached image.
    view full answer...
    Image 1 for Image 2 for
  • Recommended Trailer Hitch for 2007 Keystone Montana 3400rl 5th Wheel Trailer
    The Draw-Tite Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide # 82201 has a maximum tongue weight of 300 lbs. If you have a frame that is shorter then the Draw-Tite # 5350 is a great option with a 500 lb tongue weight. If you are unsure of the width of your trailer frame the Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 is a great option that with either bolt or weld on and is rated for 350 lbs tongue weight. If you have a frame between 18-51 inches...
    view full answer...
  • Bolt Hole Spacing of the Multi-Fit Motor Home Trailer Hitch Part # 82201
    The bolt holes on the Multi-Fit Motor Home Trailer Hitch part # 82201 are spaced 8-1/2" apart front to back. The bolt holes spaced left to right can be adjusted as needed up to 68". I have attached a photo with these measurements for you as well.
    view full answer...
    Image 1 for
  • Recommended 2 Trailer Hitches for a 2018 Winnebago Minnie Plus TT
    As long as you have a frame width that is within 22" to 72" wide, then the Adjustable Width Trailer Hitch Receiver for RVs # 13703 will work. The reason it says it might not fit is due to the fact that we just have not personally installed it on that particular trailer. We do have other hitches for different frame widths if you needed a different size like the Adjustable Width Trailer Hitch Receiver for RVs # C13704 for 22" to 66" wide frames, # C13702 for 18" to 51" wide frames, or...
    view full answer...
  • Recommended Receiver Hitch for 2021 Keystone Raptor 5W Toy Hauler
    Yes, we have options available for you to attach a receiver hitch to your 2021 Keystone Raptor 5W Toy Hauler. But before ordering, I suggest you determine if your 5th wheel's frame is rated for this. I suggest contacting your salesperson or the manufacturer directly. We have two options that I recommend, they are each basically the same item but one has a 2" drop providing a lower a receiver opening if needed. I recommend the Adjustable Width Trailer Hitch Receiver for RVs, # C13702 or...
    view full answer...
  • 2003 Newmar Country Starr Trailer Hitch Recommendation
    I have a solution for you but the Curt Hitch part # 14250 that you looked at has bees custom designed for the small Sprinter chassis. Instead you want to use the DrawTite Multi-Fit Motor Home Trailer Hitch part # 82201 this is designed to fit frame widths between 47" and 71" which will match up to your frame perfectly. There are no custom fit options available for your 2003 Newmar Kountry Starr available. This hitch will connect to the frame using the supplied hardware or by having it welded...
    view full answer...
  • Determining The Correct Adjustable-Fit Trailer Hitch For A 1996 Chevy G-30 RV
    There are weld-on adjustable-fit options available like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 which come with a much higher GTW capacity like you're wanting, but we'll first need to know the frame width. The frame width is distance from the inside edge of one frame beam to the other. With the 36041 being an adjustable-fit as well I can't say for certain what your actual width is like I could if you had a custom fit trailer hitch receiver. These adjustable-fit...
    view full answer...
  • Recommended Adjustable Trailer Hitch For 3-3/8" I-beam Frame Trailer
    The Curt Adjustable Width Trailer Hitch Receiver for RVs part # 13703 does have 4-7/8" tall brackets like you mention. Since I cannot recommend to cut down the brackets, I recommend to use an adjustable hitch that attaches to the bottom of the frame depending on the width of your trailer. If your trailer is 18"-51" wide, I recommend Curt Adjustable Trailer Hitch Receiver part # C13701 which is designed for I-beam trailers and attaches directly to the bottom of the frame instead of inside...
    view full answer...
  • Best Way to Carry a Generator on a Travel Trailer with a Hollow Bumper
    I do have a solution for you. With your 2019 Minnie Winnebago Travel Trailer model 2500RL having a hollow bumper, there really isn't a great bumper mount option to carry your generator. Your best option is going to be to add a trailer hitch using the Curt Adjustable Trailer Hitch Receiver # C13701 if your frame is between 18"-51" Wide or the Multi-Fit Motor Home Trailer Hitch # 82201 if your frame is between 47" - 71" wide. The Curt Adjustable Trailer Hitch Receiver # C13701 has a tongue...
    view full answer...
  • Trailer Hitch for E-Bike Recommendation on a Forest River Rockwood A213HWESP
    For your application I recommend checking out the Multi-Fit Motor Home Trailer Hitch # 82201 which fits 47" - 71" trailer frames and can be bolted or welded on for the installation. Since there aren't any customer fit hitches for your Rockwood A213HWESP you'll need to compare this hitch and the specs with the frame of your trailer to make sure it will work properly. I've attached a review video as well as the installation instructions for you to check out. If you don't already have a...
    view full answer...
  • How to Tell if Multi-Fit Motor Home Trailer Hitch Will Fit a 2023 Grand Design Imagine 23LDE
    The Multi-Fit Motor Home Trailer Hitch # 82201 should fit your 2023 Grand Design Imagine 23LDE but since this is a universal hitch we don't have any confirmation on this as of yet. What you'll need to do is measure the frame of your trailer, and if it's within the 47" - 71" width spec of this hitch then you'll be good to go!
    view full answer...
  • Recommended Trailer Hitch Receiver and Wiring for 2017 Dutchmen Aspen Trail Travel Trailer 18 Foot
    For your 2017 Dutchmen Aspen Trail Travel Trailer, I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704. Then you can use a standard ball mount and hitch pin like the Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K # C45534. Then you will need to add the 4-way wiring like # 18252. You can then use the mounting bracket # 18144. For trailering your bike, I recommend the B&W Biker Bar Motorcycle Tie-Down System for Trailers...
    view full answer...
  • Hitch Receiver With A 3" Receiver Tube For A 4" x 4" Camper Bumper
    We only offer the bumper mount hitches with a 2" receiver. Most bumpers on campers can't handle a significant amount of twisting an object places on it. So, most people opt for a universal frame mounted hitch like the Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide Item # 82201 because they can handle more weight however; they also only come with a 2" x 2" receiver tube.
    view full answer...
  • Is There a Class IV or V Hitch for a Motorhome
    I do have an option for you but they don't offer custom fit hitches for motorhome chassis. The best option is a universal fit hitch which are typically only available in class III weight rating ranges. For this, I recommend the Multi-Fit Motorhome Trailer Hitch part # 5350 or part # 82201 depending on frame width. The higher capacities cannot really be achieved without fabrication.
    view full answer...
  • Trailer Hitch Receiver for Motorhome on 2006 Ford F-53 Chassis
    There is a potential option so you can install a trailer hitch on your Monaco Monarch, though there is nothing that is a direct, custom-fit for a 2006 Ford F-53 chassis, so you will need to measure the frame of your chassis to find the right fit. If your frame measures 24" to 46" wide you can use the Multi-Fit Motorhome Trailer Hitch # 5350. If your frame measures 47" to 71" wide you can use the Multi-Fit Motor Home Trailer Hitch # 82201. Each of these hitches are bolt-on options that...
    view full answer...
  • Recommended Trailer Hitch for a 2008 Fleetwood Discovery Motorhome
    The best option we have for a 2008 Fleetwood Discovery Motorhome is the Multi-Fit Motor Home Trailer Hitch part # 82201. In order to install this hitch you will need to drill into the frame but this is the only option since they don't have any direct bolt-on fits.
    view full answer...
  • Recommendation on Multi-Fit Motor Home Trailer Hitch For 2015 Keystone 5th wheel
    The Multi-Fit Motor Home Trailer Hitch, # 82201 is designed to fit a variety of frame widths as it adjusts from 47" to 71" wide so I am certain it will fit your 2015 Keystone Montana High Country 5th Wheel. You have the option bolting on or welding.
    view full answer...


< Previous
12



Do you have a question about this RV and Camper Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B
Employee Carrie F
Updated by:
Carrie F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.