bing tracking image
  1. RV and Camper Hitch
  2. Stromberg Carlson
  3. Bumper Mount Hitch
  4. 4 x 4 Inch Bumper
  5. 4-1/2 x 4 Inch Bumper
  6. Bolt-On
Stromberg Carlson 2" Motor Home Hitch Receiver for RV Bumpers - 200 lbs

Stromberg Carlson 2" Motor Home Hitch Receiver for RV Bumpers - 200 lbs

Item # BA-100
Our Price: $48.25
RV and Camper Hitch
Shipping Weight: 10 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory. Great Prices for the best rv and camper hitch from Stromberg Carlson. Stromberg Carlson 2" Motor Home Hitch Receiver for RV Bumpers - 200 lbs part number BA-100 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (119)
  • Q & A (0)
  • Videos (2)
  • Photos

Stromberg Carlson RV and Camper Hitch - BA-100

  • Bumper Mount Hitch
  • 4 x 4 Inch Bumper
  • 4-1/2 x 4 Inch Bumper
  • Bolt-On
  • 200 lbs TW
  • 2 Inch Hitch
  • Stromberg Carlson

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory.


  • Trailer hitch receiver clamps onto your RV's rear bumper to accommodate hitch accessories, such as a bike rack or a cargo carrier
    • Clamps onto top or bottom of bumper
  • Powder coated steel resists corrosion
  • Durable zinc-plated hardware is included


  • Application: 4" x 4" or 4-1/2" x 4" RV bumpers
  • Weight capacity: 200 lbs
    • Do not exceed the weight rating of your bumper
  • Mounting plate dimensions: 6" long x 6" wide


  • For use with hitch-mounted, RV-approved accessories only. Not rated for towing.
  • Not to be used with an adapter or extender.

BA-100 Stromberg Carlson RV Bumper 2" Trailer Hitch Receiver Adapter - Clamp On

California residents: click here

Video of Stromberg Carlson 2" Motor Home Hitch Receiver for RV Bumpers - 200 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Stromberg Carlson 2 inch Motor Home Hitch Review

Randy: Hey guys, it's Randy here at Today we're taking a look at a Bumper Style Receiver Tube Hitch. We're going to work on RVs and travel trailers. This one's from Stromberg Carlson.Now this bumper mount receiver tube is going to be an excellent way to solve the problem of getting either dirty, muddy gear to or from the campsite, or getting some bikes. This is going to work out with bike racks. It's going to work out with cargo carriers.This is going to give you some additional capacity.

Or, if you don't like the idea of hanging your bikes off of your ladder to get up top, it can be kind of a pain to get the bikes up and on. This is going to allow you to use a nice Class 3 bike rack, and have it hanging on the bock of your inaudible 00:00:36. You just want to ensure that that is rated for travel trailer or RV use, depending on what your application is.Now, this gives us a 2" by 2" receiver tube opening. That's where we get the Class 3, or any accessory you choose to put in there. You want to be sure that's rated for Class 3 use.It's going to have a 200-pound limit.

We don't want to exceed that with whatever item we're putting in. You also want to check with the manufacturer of the bumper to ensure that it's rated for that weight. If not, go up whichever number is the lowest.Now, this has been designed to work with 4" x 4" bumpers, like what we have here. And also the 4 x 4-1/2. The only real stipulation to that is that it's a solid, continuously welded bumper.

It should have four sides on it, and there shouldn't be any gaps in that anywhere at all.Sometimes you'll see bumpers that look similar to this. But the back of them will be open. In that situation, this isn't going to be the one for you.Now, here we've got our 5/8ths diameter pinhole. That's what will be securing all of the items in the receiver tube with. You want to choose a Class 3-rated pin or clip for that.

There's also plenty of room if you want to do an anti-rattle device, or even a locking hitch pin. But the anti-rattle bolt here that is provided does a great job.As far as finish quality, it looks pretty much on par with some of the other ones that I've seen. I've seen cleaner welds and I've seen more complete welds on some of the other ones. But all in all, it has a really good finish on it. And I think it's going to do the job very well for you.Something else you'll really appreciate about this that we don't often see on all of the other ones. You'll notice now we've got our bolts in, holding our rack in place. But you can see it's got some movement to it.By using this bolt right here, we can tighten that in so it makes contact with whatever accessory we've got installed. And once tightened down, it's going to eliminate that movement. Now you can see with that tightened down, no movement or play here at the connection point whatsoever.Now to begin your installation process, you do want to find the center point of your bumper. We're going to use that to place ours. If you have a spare tire carrier, or in our case, we have a ladder back here, you can offset that a little bit if want.But just keep in mind, whatever cargo carrier or bike rack that you're going to be using, don't let that hang out past your camper. At least that way you'll have some frame of reference on where that's at.Now once you've decided on your location, we need to take our bolts. These are going to be dropped down through the top. Now you can mount this on the underside as well; that would be option number two. This is our first option. The only reason you're really going to do that is if your camper overhangs, and it's too low here. In that case, you would flip this over, mount it up here, bolts up from the bottom.Once our bolts are through, we'll place the plate on. And then onto each one of those, we need to thread one of our nylon lock nuts. Now we're going to take the play out of this. We're going to tighten this up so that our plate comes up to the bottom. We'll just get rid of that slack. We'll make our final adjustment then, torque it down.Now, for the head of the bolt, you'll use a 19-millimeter or a 3/4 . for the nut you'll need an 18. Now, we want to grab our torque wrench, same set of tools. But we want to get these torqued down to the proper specifications. You'll find that listed in your instructions there.And that's going to complete our look at the Stromberg Carlson Bumper Mount Receiver Tube.

Customer Satisfaction Score:

Customer Reviews

Stromberg Carlson 2" Motor Home Hitch Receiver for RV Bumpers - 200 lbs - BA-100

Average Customer Rating:  4.9 out of 5 stars   (119 Customer Reviews)

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory.


The hitch is a perfect addition to my travel trailer bumper. I was able to slide over the spare tire and be able to set the hitch off centered in order to accommodate a bike rack. Easy to install and to move the bike rack from the travel trailer to the back of the truck.



Getting ready to use this hitch for the first time since I’ve gotten it. This allows me to move by electric bicycle rack from the back of my truck on a 2 inch hitch to the back of my trailer when I’m ready to go camping.


Worked perfectly for mounting tv on travel trailer 4" square bumper


Good product for the 4” bumper on your RV/trailer. I used it on the rear of a travel trailer to carry a bike rack. Did the job, but remember not to exceed the total weight listed for your bumper. Prompt delivery was very important and came thru again (as usual). It is always a great experience dealing with them!


Easy to Mount and works perfectly. And the order came quick and in great shape


Nice heavy duty unit, welds are very good. I plan to use this to mount my grill on the back bumper of my RV. I made my own grill mount with a 2" tongue that fits perfectly into the receiver. I was going to make my own 2" Receiver, but the price was so good that I bought it from I use them for all of my towing and RV needs. They price match anyone, even [big online stores]. I highly recommend


Praise the Lord Jesus .i have just installed it and be trying it.thank you


I ordered this hitch on Sunday afternoon received it Tuesday afternoon delivery was very fast I hooked it up the next day on my camper before I did that I want to Fastenal to check to see if your bolts would be good quality bolts that would not break,they told me they were made of high-quality steel, I should never have any problem with them. I would definitely recommend your company and your product to anyone


Fit and finish is still good and hasn't failed yet!


Just what I hoped for and the price was right. I'm using it with a carrier for a small generator. It seems to work just fine. I have no complaints



Great addition for using a small cargo carrier or back rack. I use mine for 2 purposes, first use is to haul my large cooler with our ice and drinks. The second use is after we get set up I have a raise platform to use my outdoor shower that is mounted right above to give my 4 legged baby a shower if he decides to play in the mud or such. The other good thing the way mine just happened to be placed, when I dont need it I just slide it under the camper and hitch it back on the hitch backwards underneath the camper. Makes it harder to steal or forget and its out of the way. Great product!! The only thing that would make this any better is if you could just pull a pin and rotate it underneath the camper. Im working on that idea for summer. Lol!!!


This hitch works great for adding a bike rack to the bumper of our pop-up camper. Very well made and solid construction. Install was easy by just tightening the four nuts/bolts.


installed this on my camper rectangular bumper, and it works fine. Was easy to install, although i did have to install it upside down due to bumper clearance issues.


One must remember that this is only a bumber hitch. However, for it's stated purpose, I was very satisfied with the quality and sturdiness of the hitch.


Product was exactly as described, our Nash has a 4 & 3/8” square bumper (has an aluminum diamond plate trim cover) and this receiver fit snugly. Will work great for bike rack in between ladder and spare tire carrier. Once again, etrailer nailed it!



Working perfectly still! Thanks again Etrailer!


Great Product and fast service. I attached this to the tongue of my travel trailer to store my trailer hitch and it worked great.



receiver is working great, only regrets is I didnt do this sooner.


We are traveling accross country and have no problems whatsoever with the hitch receiverfor our RV bumper. Great product!




Exactly what I wanted and expected. Arrived quickly as advertised, fits in bumper and will allow me to plug in a bike rack. Thank you.

Randy H.


It fit as advertised and has stayed out. No complaints at all.


We recently installed the Stromberg receiver and are pleased with the strength and stability of the hitch. We are able to attach our bike rack and 2 E-bikes with no problem.


I will use this to attach a bike rack to my travel trailer. It's simplicity and heavy construction is what makes it the perfect product. ETRAILER is going to have what you're looking for when maybe you didn't even know it existed. They maintain personal communication throughout purchase and delivery. Excellent seller.


Very good workmanship,quality material and certainly stout enough to secure a bike rack. Only issue is the holes used to secure the receiver shank are to small and will need to be drilled out to allow the use of a standard locking pin.


Fantastic for hauling bikes on rear bumper of our trailer. It looks to be very well built but only time will tell

Gregory W.




I ordered the Stromberg Carlson hitch reciever for my RV bumper standard shipping. I got a email from George J. stating that he upgraded my shipping to exspress shipping. I was totally surprised .It speaks volumes about this company and there service and products. The reciever is heavy duty well made should hold my cargo carrier and generator etc with no problems. Will shop again with this company!!Thank you


It is just what I needed to move my bike carrier to my RV. The first order came in with a part missing. It was shipped in retail box with just a label put on it and the base plate feel out. I called customer service and they were great, shipped the part right out to me. It was a pleaser to do business with a company that cares.


This is the third receiver of this type that I have tried and finally found this one to be of good quality and actually fits my hitches-cargo rack and bike hitch. I
Good product.


Strong hitch. Was easy to install.

Show More Reviews

See what our Experts say about this Stromberg Carlson RV and Camper Hitch

  • Distance From Center of Hitch Pin Hole to End of Hitch Opening on Stromberg Carlson Hitch BA-100
    The distance from the center of the hitch pin hole to the end of the hitch opening on the Stromberg Carlson Hitch part # BA-100 is 3 inches.
    view full answer...
  • Bike Rack Receiver Compatible with 4-1/4 Inch Square Bumper on 1997 Nash Trailer
    The Stromberg Carlson 2" Motor Home Hitch Receiver for 4-1/2" x 4" Bumpers - 200 lbs # BA-100 will work well for your 4-1/4 inch square bumper. The mounting holes are 5 inches on center and the holes are 1/2 inch, so it will work with your bumper.
    view full answer...
    Image 1 for
  • Stromberg Carlson RV and Camper Hitch # BA-100 Installation
    The Stromberg Carlson 2" Motor Home Hitch Receiver for 4-1/2" x 4" Bumpers - 200 lbs # BA-100 does not have manufacturer instructions for installation available online. I've attached a video to assist but the installation is simply tightening the 4 attachment bolts with wrenches or sockets so that the top and bottom plate are parallel and tight to the bumper. This product is not for towing and not to be used with an adapter or extender. It is only rated for use with hitch-mounted RV-approved...
    view full answer...
  • Weight of Stromberg Carlson 2 Motor Home Hitch Receiver for RV Bumpers - 200 lbs Item # BA-100
    The Stromberg Carlson # BA-100 2 inch motorhome hitch receiver weighs just a bit less than 9 lbs. The receiver is designed for use on 4 x 4 inch or 4 x 4-1/2 inch bumper and has a 200 lb capacity. The hitch isn't meant for towing, it's meant to be used as an attachment point for hitch accessories. I've linked you to a product description video featuring the RV bumper recevier.
    view full answer...
  • Can Stromberg Carlson BA-100 Carry 2 Generators
    The Stromberg Carlson # BA-100 motorhome hitch receiver has a capacity of 200 lbs or the capacity of the bumper, whichever is less. As long as the weight of the carrier and the generators is less than 200 lbs or the capacity of the bumper, everything will work fine for you.
    view full answer...
  • Bolt Hole Dimensions of Stromberg Carlson Motor Home Hitch Receiver
    The Stromberg Carlson 2" Motor Home Hitch Receiver for 4-1/2" x 4" Bumpers - 200 lbs # BA-100 has a 6 inch square base and bolt holes that are 5 inches on center. I've attached a photo and video to assist. The bolt holes are about 1/2 inch diameter.
    view full answer...
    Image 1 for
  • Installation Instructions for the Stromberg Carlson 2" Motor Home Hitch Receiver for RV Bumpers
    I am sorry to hear your hitch arrived with no instructions. I have included a picture of the instructions for the Stromberg Carlson 2" Motor Home Hitch Receiver for RV Bumpers # BA-100.
    view full answer...
    Image 1 for
  • Wanting a RV Trailer Hitch to Tow Two Jet Skidoo
    The Stromberg Carlson 2 Inch Hitch Receiver, # BA-100, is not rated for trailer towing. I do have a solution for you. The Curt Adjustable Width Trailer Hitch Receiver for RVs, 22 to 72 Inches Wide, # 13703, can be installed between a travel trailer's frame beams. The Curt hitch can be mounted on box frame, C-channel and I-beam trailer frames. If your trailer's frame is between 22 to 72 inches apart, then this hitch will work well. The hitch has the 2x2 inch receiver opening and has a...
    view full answer...
  • Hitch Receiver for RV Bumpers on 2018 Keystone Cougar 28RDB
    It is difficult to make an accurate recommendation without understanding the available measurements that would allow fitment. But if you do not think there is enough room for a frame mounted hitch due to a steel tube welded to the bumper, does that steel tube provide solid enough situation for a bumper mounted hitch? What are the dimensions of the bumper on your 2018 Keystone Cougar 28RDB? We have the Stromberg Carlson 2" Hitch Receiver for RV Bumpers, # BA-100. This clamp-on receiver...
    view full answer...
  • Comparing the Stromberg Carlson # BA-100 and Swagman # S64025 Bumper Mount Receivers
    The only real difference, aside from the manufacturer, between the Stromberg Carlson # BA-100 and the Swagman # S64025 receivers is that the Stromberg Carlson fits 4-1/2" x 4" bumpers while the Swagman fits 4" x 4" bumpers. I have linked some review videos for you to check out as well.
    view full answer...
  • Will the RV Bumper Hitches Work On a 3" x 3" Bumper/Frame
    I do have an option for you but none of the bumper hitches like the Stromberg Carlson Hitch Receiver for RV Bumpers part # BA-100 we offer will work with a 3" x 3" bumper/frame, you'd need to get different bolts and fill the extra gap so this is not what I recommend. Instead, I recommend a standard frame mount trailer hitch, the Adjustable Width Trailer Hitch Receiver part # C13702.
    view full answer...
  • Can 18 inch Extender be Used to Pull Boat Trailer Behind Travel Trailer
    The Brophy Hitch Extender for 2-inch Trailer Hitches # ST18 can be used to tow a boat trailer behind your truck-pulled camper. There are a few things that you will want to keep in mind though. Even though you can pull a boat trailer behind a bumper trailer it is illegal is many states. The max Tongue Weight (TW) is 350 lbs and max Gross Trailer Weight is 3,500 lbs. Keep in mind that even though this might have a fairly good TW capacity, your TW capacity is reduced by 33-1/3% percent...
    view full answer...
  • Recommendation for a Bumper Mounted Trailer Hitch for an RV, Trailer, or Motorhome
    It sounds like the Stromberg Carlson 2" Motor Home Hitch Receiver, part # BA-100 would be your best bet. This receiver will fit bumpers up to 4 by 4-1/2 inches. This receiver is designed for mounting accessories like a bike rack, and not for towing purposes. It has a 200 lb capacity. You will want to make sure your bumper is rated for this application and do not exceed the capacity of the bumper or hitch, whichever is lower.
    view full answer...
  • Can the U-Bolts On the Ultra-Fab Motor Home Trailer Hitch Receiver Be Turned
    The Ultra-Fab 2" Motor Home Trailer Hitch Receiver part # UF35-946401 has a bolt hole spacing of 5" front to back and 4" side to side so it does not sound like it would work for you. However, we do have the Stromberg Carlson 2" Motor Home Hitch Receiver part # BA-100 which has a bolt hole spacing of 5" front to back and 5" side to side so it does sound like it would work for you although I am not quite sure of the intended purpose.
    view full answer...
  • Ultra-Fab RV Bumper Hitch Recommendation For Motor Home
    While we do have a hitch that will work for your needs, the Ultra-Fab Bumper Mount Hitch # UF35-946402 you referenced is designed specifically for a 4 inch by 4 inch bumper and would not fit. The Stromberg Carlson # BA-100 is a perfect fit as it is intended for RV bumpers between 4" x 4" and 4" x 4-1/2 inch with a weight capacity of 200 lbs. It features a 2-inch receiver opening with a plate measuring 6 inches by 6 inches. Just a reminder, this is intended for RV-approved accessories...
    view full answer...
  • Trailer Hitch Recommendation for a 2005 Savoy SL Travel Trailer
    What I recommend for a bumper mount hitch is to go with # BA-100 which fits 4 x 4-1/2 inch bumpers. However, use a bumper mount hitch only if it is a square continuous welded steel bumper. If the bumper is not square, not continuously welded, and/or not steel, I recommend using a frame mount hitch. The most popular frame mount hitch that fits the widest variety of frames is # 13703. It fits box frames, C-channel frames, and I-beam frames. It can be welded on or bolted on. Welding should...
    view full answer...
  • Swagman 4 Bike Bike Rack For RV and Campers with Different Sized Bikes
    This rack part # S80600 does require the bikes to all be a close wheel size due to the way it mounts to the bumper. I highly recommend adding a receiver tube to your bumper part # BA-100. This opens up your opportunity for hitch mounted accessories and allows you to use a more stable bike rack such as part # S64940. You can carry up to 4 bikes with a weight capacity of 35 pounds per bike.
    view full answer...
  • Recommended Bumper Mount Trailer Hitch and Cargo Carrier
    For your 2010 Primetime Lacrosse, I recommend the Curt RV Bumper Trailer Hitch Receiver # E-100. This is made much better and will be more durable than some of the other models of receivers that mount to a trailer bumper. This will give you a max capacity of 350 lbs. Then I recommend the 20x59 Curt Cargo Carrier for 2" Hitches # C18151. This carrier will fold 9 inches from your bumper so it should fit over your spare depending on its mount. The 20x60 Cargo Carrier #...
    view full answer...
  • Recommended Trailer Hitches For 2002 Winnebago Minnie Motor Home
    The Trailer Hitches we offer for RVs depend on the installation of the hitch. Some are able to handle a bumper mount hitch and others are either bolted or welded to the RV frame. If you are looking for a frame mount hitch and your frame width is between 18 and 51 inches I recommend part # C13702. This is a Class lll hitch and it has a 2 inch receiver opening. For a bumper mount hitch and if you have a bumper that measures 4 x 4-1/2 inches I recommend part # BA-100. This hitch has a...
    view full answer...
  • Is there a Bumper Mount Hitch that Will Fit a 4-3/8 Inch Bumper on an Arctic Fox Trailer
    Bumper mount hitch # UF35-946402 is designed specifically for 4 inch square bumpers so I cannot recommend it on a 4-3/8 inch wide bumper. Hitch # BA-100 would be a better fit since it fits 4-1/2 x 4 inch bumpers. All of the other options are either going to be 4 x 2 or 4 x 4. Also check with the trailer manufacturer to make sure the bumper is rated for use with a hitch.
    view full answer...
  • Trailer Hitch for a 2017 Rockwood Roo to Carry Bikes
    Since Curt trailer hitch # C13702 is a universal type of product you have to look at the installation instructions and compare them to your trailer to determine fit. I have linked the installation instructions for you. If the bumper on your trailer is 4-1/2 x 4 inches then you can use # BA-100 but with these you have to be careful not to exceed the capacity of the bumper (if it is rated for weight carrying). Another option is the bike bunk # CC-275 which mounts to the front A-frame of...
    view full answer...
  • Bumper-Mounted Bike Rack Recommendation for 2016 Coleman Travel Trailer with 4 Inch Bumper
    We have a couple of options for a bike rack that will install on the 4 inch square bumper at the back of your Coleman Travel Trailer. Since you mentioned that your camper has a spare tire already installed on the bumper, a great bike rack option for you is the Swagman Around the Spare Deluxe 2-Bike Rack # S80501. One of my co-workers uses this bike rack on his trailer to carry his family's bikes when they go camping and he really likes it. This bike rack will install around the 4 inch...
    view full answer...
  • Bike Carrier for 2 Bikes at the Back of a 5th Wheel Trailer with 1-1/4 Inch Hitch
    There are no bike racks for fifth wheel hitches compatible with a 1-1/4 inch trailer hitch receiver. You would need to add a 2" hitch like the # BA-100 that will bolt onto an RV bumper, or the more traditional # UF35-946403 which will weld onto a C-channel or traditional 5th wheel frame. Once you have a 2" hitch on your 5th wheel, you could use the RV approved Yakima LongHaul 4-bike rack # Y02476.
    view full answer...
  • Recommended Bike Rack and Hitch Receiver for Travel Trailer Bumper
    Thanks for the photo. The Swagman Around the Spare Deluxe 2 Bike Rack for RV Bumpers # S80501 and the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663 are great options for your 2016 Pacific Coachworks Northland Travel Trailer. The bumper has to be completely enclosed is the explanation you are likely seeking. The Tube with fully welded enclosed ends is ideal and is normal for many applications but not all. You can alternatively use the Curt RV Bumper 2" Trailer...
    view full answer...
    Image 1 for

Do you have a question about this RV and Camper Hitch?

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Shelly K
Written by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Zach D
Video by:
Zach D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.