bing tracking image
  1. RV and Camper Hitch
  2. Ultra-Fab Products
  3. Frame Mount Hitch
  4. 47 - 77 Inch Wide Frame
  5. Weld-On
  6. 350 lbs TW
Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames

Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames

Item # UF35-946403
lowest price pledge
Retail:$366.20
Our Price: $267.25
You Save: $98.95
RV and Camper Hitch
This item qualifies for Free Shipping
Shipping Weight: 53 lbs
Quantity: 
In Stock
UF35-946403 - 350 lbs TW Ultra-Fab Products RV and Camper Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Use this receiver to carry a bike rack or cargo carrier on the back of your trailer. Do not use for towing. Unit welds onto I-beam, C-channel or rectangular fifth-wheel trailer frames. Lowest Prices for the best rv and camper hitch from Ultra-Fab Products. Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames part number UF35-946403 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (50)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Ultra-Fab Products RV and Camper Hitch - UF35-946403

  • Frame Mount Hitch
  • 47 - 77 Inch Wide Frame
  • Weld-On
  • 350 lbs TW
  • 2 Inch Hitch
  • Ultra-Fab Products

Use this receiver to carry a bike rack or cargo carrier on the back of your trailer. Do not use for towing. Unit welds onto I-beam, C-channel or rectangular fifth-wheel trailer frames.


Features:

  • Provides 2" x 2" trailer hitch receiver opening at the rear of your trailer
    • Perfect for mounting a bike rack, cargo carrier or other hitch accessory
    • Do not use for towing
  • Welds onto I-beam, C-channel or rectangular trailer frames
    • Gusset may be required to weld onto I-beam frames
    • Plate may be required to weld onto a C-channel frame
  • Constructed of heavy-duty, powder coated steel


Specs:

  • 350-lb Maximum tongue weight capacity
  • Adjustable width: 47-1/8" to 77"
  • 1-Year warranty


35-946403 UltraFab Accessory Adapter for 5th Wheel Trailers

Installation Details UF35-946403 Installation instructions



Video of Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Ultra-Fab Products RV and Camper Hitch - Frame Mount Hitch - UF35-946403 Review

Speaker 1: Today we're taking a look at the Ultra Fab 2" Trailer Hitch Receiver for trailer frames. This unit provides a 2" by 2" trailer hitch receiver opening at the rear of your trailer or RV. This is perfect for mounting the bike rack, cargo carrier or other hitch accessory. Please keep in mind that this is not to be used for towing applications.It welds onto I-beam, C-channel or rectangular trailer frames. Also keep in mind that a gusset may be required to weld onto I-beam frames. And a plate may be required to weld onto a C-channel frame.

Its constructed of heavy-duty, powder coated steel. Does a great job at resisting rust and corrosion. Features a 3500-lb weight load capacity and a 350-lb maximum tongue weight capacity. You always wanna be careful not to exceed the RV frame rating provided by the manufacturer. And one of the neat features about this unit is that it's adjustable.So it has these arms right here that can slide out.

It's able to adjust anywhere from 47-1/8" all the way out to 77". And it is a weld on installation. So these arms extend out. Really nice design. Same construction and same finishing as the main hitch.

And then it comes with some hardware here, and those are set bolts. So on the back side, once you have the arms extended where they need to be, you thread in the bolt here to kinda lock that arm into position. And again, it's a weld on installation designed to be welded onto the RV or trailer frame.Again, adjustable from 47-1/8" to 77". Right here you have a 2" by 2" opening. This will accept a standard 5/8" diameter hitch pin or hitch lock.

And then you have safety chain loops right here that provide a suitable point for securing any accessory that you might have if it has an accessory strap or a tie down strap or a cable or chain. That's what these are used for. Overall really nice design. And that's gonna do it for today's look at the Ultra Fab 2" Trailer Hitch Receiver for trailer frames.


Customer Reviews

Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames - UF35-946403

Average Customer Rating:  4.8 out of 5 stars   (50 Customer Reviews)

Use this receiver to carry a bike rack or cargo carrier on the back of your trailer. Do not use for towing. Unit welds onto I-beam, C-channel or rectangular fifth-wheel trailer frames.

- UF35-946403
by:

We needed to add a bike rack to our Cougar 28sgs fifth wheel and felt the fifth wheel bumper would not be strong enough to support carrying bikes. We purchased this hitch and turned it upside down so it rested on top of the fifth wheel bumper and welded it to the frame of the fifth wheel for support. The hitch was a perfect width to reach the frame of the fifth wheel.


Comments
Great very sturdy and well made
Marsha Z - 05/01/2021


- UF35-946403
by:

Purchased the product and had it shipped to a courier pickup location. Packaging was a little beat up but no damage. Had the product installed on a 2018 36 ft fifth wheel. The product needs to be welded onto the frame and my installers had no issue with doing this. They did weld the adjustable sleeves together instead of using the bolt to tighten them together. Also had the receiver part of the hitch welded to the trailer bumper for extra support. Product is well made and the paint has held up well with no visible rust after over one year of use. Remember to paint over the weld areas. etrailer purchase was no issue and delivered on time.


Comments
Product is still holding up with no issues after one year.
Jon - 01/11/2022


- UF35-946403
by:

I purchased this hitch receiver so that I could attach a bike rack to the back of my camper. It was easy to assemble, adjust and install with the help of a friend who is a welder. It does add weight to the back of the trailer and load needs to be adjusted to reduce trailer sway in my case.



- UF35-946403
by:

Installed this hitch along with a heavey 1/4" x 4'' steel rear costom bumper and attached them both to the frame and welded both together to make it even stronger to pull just about anything. Another trailer or a car dolly or cargo hauler.



- UF35-946403
by:

I needed a trailer hitch for the rear of my 5th wheel toy hauler. I found this company on-line and after reading some really positive reviews I ordered one. The website was very easy to use, especially for a computer challenged user. E-mails came quickly that my order was placed and then shipped. The package arrived quickly. First thing I noticed was box was kind of, well not falling apart but kind of. Extra tape was used on both ends. When I lifted it I realized why, this thing was HEAVY! After cutting the box open and inspection I was really impressed. The paint looked good. I inspected the welds and they looked very good, very NICELY done. I will be taking my 5th wheel and this hitch to a local trailer shop for install. Overall I am very impressed with the on-line ordering, the hitch exceeded my expectation. I will be towing a small open trailer with my Side by Side on it.


Comments
Yes it’s been a year since I bought this hitch. I had it welded on the rear of my toy hauler. The shop I used made quick work of it, a job well done. It only cost $100.00 . That is as far as I’ve gotten with it. I am modifying a trailer to haul my RZR and don’t have it done yet so I have not pulled anything with it.
David - 07/22/2020


- UF35-946403
by:

UF35-946403 ultra-fab weld on hitch install pics



- UF35-946403
by:

Packaging had me very worried, because it was taped and repaired like it been through a war on both inside and outside boxes. I would have given 5 stars otherwise. Seems like a good quality hitch and fit my application. Thank you for finding a nice product for me!



- UF35-946403
by:

Overall, great customer service. During transit, one piece went missing. Called CS, missing piece was replaced. Eventually arrived. My suggestion, this item should be packaged, wrapped together securely with strong tape due to it’s weight.



- UF35-946403
by:

We have received the package, which was in very good condition. I have recently had knee replacement surgery and have not had a chance to have the hitch installed.


Comments
Very well. It fit perfect and works great. Thank you.
Harry R - 10/18/2020


- UF35-946403
by:

Fantastic service. Accidentally ordered the wrong part. Customer service promptly assisted me on getting the correct part and shipped quickly. Product arrived a day earlier than expected



- UF35-946403
by:

This is my 2nd Ultra-Fab Trailer Hitch I have ordered and installed from etrailer. There is a reason for that, it is a great product! I have never been disappointed from any etrailer product. The service is next to none at etrailer! The Ultra-Fab Hitch is very well made, with quality craftsmanship. I would not hesitate to order again. (If I have to! Dang Hail Storms in Wyoming!)



- UF35-946403
by:

I dont know how to weld, so I had my shop at work do it for me. Our welder had it done like like 40 minutes! The build quality on this hitch receiver is top notch. It is very heavy, sturdy and well built. I have complete faith in the hitch itself. I plan to use a Lets Go Aero BikeWing T4 bike rack and one of my bikes is a $5000 bike, so I needed to make sure whatever I got would be sturdy and well built.



- UF35-946403
by:

I had this welded to my 40’ fifth wheel and using a Kuat bike carrier I hauled 4 large frame mountain bikes over 20 thousand miles and across the worst roads the US interstate system has to offer. It worked perfect.



- UF35-946403
by:

Received the Ultra-Fab 2" Trailer Hitch Receiver for 5th Wheel Trailer Frame as promised. Installation was simple. Once positioned, clamped it and started welding. Centered the receiver and tightened the bolts then added a spot weld for backup.



- UF35-946403
by:

Excellent product! The item was out of stock but communication with ET was on great. They notified me of when the unit would be available and when it was shipped and delivered as well. It was in good condition other than being a bit scuffed up by the shipping company. It fit my 31' 5R just fine and the welder took only an hour to install it. Very sturdy product! It'll work perfectly for my bikes and would likely work just fine for a Moped as well. One word of caution; you will likely have to purchase an extension (mine is 8") for the receiver if you have a fiberglass body. It makes the bikes wobble a lot more so you'll have to use tie-down straps (a good idea anyway). Very happy with this.



- UF35-946403
by:

Excellent product. Very tough, straight and true. Had it welded up onto my 5th wheel by a trailer welding shop for about $110. I use it for a bike rack only but an equipment rack would work also.



- UF35-946403
by:

As always Etrailer has come thru. I ordered this part from another vendor cancelled it because of delay and ordered from Etrailer and received it a day early. Thanks Lori PS. Now my bike rack, my trucks 5th wheel hitch and my rv receiver hitch is thanks to Etrailer and my credit card. Etrailer is the most professional organization I have ever done business with.



- UF35-946403
by:

Very easy to use product. Fit well and very sturdy. Had a friend weld it on and I trust it more than the trailer frame metal! I use it for 2 place bike rack.



- UF35-946403
by:

The product was exactly what I was looking for. The shipping was fast with just the standard rate. My only complaint is that the product was not packed properly. The box that it came in was at least 3 maybe 4 times to big for it and the hitch’s original packing was destroyed. Fortunately there wasn’t any damage to the hitch itself.



- UF35-946403
by:

I put this hitch on the back of a Jayco Pinnacle 5th wheel to utilize a Bike carrier, it worked great, the ability and range that it adjusts fit the need perfectly. This is a Weld on application that is made very solid.



- UF35-946403
by:

Thank you for the great service. The trailer hitch arrived yesterday and looks perfect to use with our bike carrier.



- UF35-946403
by:

Great help and fast



- UF35-946403
by:

Recieved my order in record time. Package tracking was dead on. Although the 5th wheel receiver was in the manufacturer packaging, everything arrived in great shape. Thanks.



- UF35-946403
by:

Not installed yet. Welder backed up. Looks well built and finish is good. Only one negative is packaging. Something this heavy needs strapping tape. The end of the box was busted out.



- UF35-946403
by:

Have used before and was very happy with it. Using same hitch on new trailer. Received on time, same high quality, good price. Installer very impressed with quality and ease of installation. Have no problem recommending product.


32
57
Show More Reviews

Ask the Experts about this Ultra-Fab Products RV and Camper Hitch



  • Do Fold-Out Steps Need to be Removed When Mounting Brophy Scissor Steps
    That is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as when your steps are folded up there is no interference in that area the Brophy steps will be a great option. I added a photo for you a customer sent in which shows the bracket and steps installed so you can get an idea of how they mount. The...
    view full answer...
    Image 1 for
  • Trailer Hitch for RV With Frame Width of 75 Inches for Cargo Carrier
    There is a trailer hitch that will fit your 75 inch wide frame but you should not use spacers to install the Adjustable Width Trailer Hitch # 13703 due to potential instability on a frame longer than its intended use. Instead the best option is the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403 which is adjustable and welds onto I-beam, C-channel or rectangular trailer frames that are between 47-1/8" and 77" wide so it is perfect for your 75 inch frame, though it...
    view full answer...
  • Recommended Trailer Hitch for 2021 Grand Design Imagine 2500 Travel Trailer
    You'll need to measure the distance between the side stanchions on your Grand Design Imagine 2500RL to determine which hitch will fit, but the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" # C13701 is a great option that can be bolted or welded on. This hitch has a 500-lbs tongue weight capacity, so it's well rated for both bike racks and a cargo tray. The only advantage to a weld on application is that, if welded properly, the attachment point, weld,...
    view full answer...
  • Trailer Hitch and Weight Distribution Recommendation For 2007 Mercedes Benz ML350
    Both hitches share the same basic design and the same capacity, but I'd personally choose the Curt # 13342 over the Draw-Tite # 75376 because I feel that Curt does a better job with their powder coat finish. To realize the full capacity of the hitch, you'll want to use a weight distribution hitch, and because travel trailers are pretty vulnerable to trailer sway caused by crosswinds and oncoming and passing traffic, I'd recommend going with a system that includes an effective sway control...
    view full answer...
  • Recommended RV Trailer Hitch Receiver For 2009 Heartland Bighorn
    For your 2009 Heartland Bighorn, I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs # 13703 if your frame is 22 to 72 inches wide. If it is wider, you can use the Ultra-Fab 2" Trailer Hitch Receiver for 5th Wheel Trailer Frames # UF35-946403.
    view full answer...
  • Weight Distribution Hitch For Trailer with Welded Frame Plate
    You are correct that the welded plate on your trailer frame will obstruct the installation of most weight distribution brackets. The best solution for your case is to use these Chain Hangers # RP58305. These bolt on to the side of your trailer frame to provide a mounting point for the weight distribution system, as opposed to the typical clamps that need to fit all the way around your trailer frame. With these chain hangers, you can use a weight distribution system, such as the Reese...
    view full answer...
  • Cargo hitch for 2017 Heartland Cyclone 3611 5th wheel toy hauler
    The Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames will work great for your 2017 Heartland Cyclone 5th wheel toy hauler. The hitch requires between 47-1/8" to 77" from the inside of the frame to the inside of the frame on the other side. Since you have 78" total from outside to outside, there is more than enough room to mount it. Like you mentioned, this is a weld on hitch, and may require gussets to be welded to I-Beam frames. The hitch is not inteded to tow with, but you carry...
    view full answer...
  • Recommended Trailer Hitch for 2019 Rockwood Mini Lite 2306
    The Adjustable Width Trailer Hitch Receiver part # 13703 is what I recommend for a 2019 Rockwood Mini Lite 2306. This is the most popular trailer hitch option because it extremely universal and will work on pretty much any trailer. That said, universal will be your only option as they don't offer custom fit trailer hitches for the vast majority of trailers.
    view full answer...
  • Hitch Option to Fit Rear of 2019 Keystone Fusion 427
    The most versatile trailer hitch we offer that will work well on your 2019 Keystone Fusion will be the Curt part # 13703 as it fits frame widths of up to 72 inches and also fits all common frame sizes. I attached an install video for this on a similar camper for you to check out as well. Then for a cargo carrier a fixed carrier would be the best option as the folding carriers have hinges which would be a weaker point. For that we have the Curt carrier part # C18152 which measures 24 by...
    view full answer...
    Image 1 for
  • Installation Of Ultra-Fab 2 Inch Trailer Hitch Receiver For 5th Wheel Trailer Frames
    The manufacturer made the Ultra-Fab 2" Trailer Hitch Receiver for 5th Wheel Trailer Frames # UF35-946403 for a weld on application. It is possible to attach the hitch in the manner you suggested, but it is not rated for a bolt on application. Since this hitch isn't for towing purposes, it may function fine with a bolt on application but the drilling will bring down it's capacity. I've attached a picture of the dimensions for you. There isn't a ton of space for 4 holes and drilling will...
    view full answer...
    Image 1 for
  • Recommended Bolt-On Trailer Hitch for Trailer with I-Beam Frame
    If you are looking for a bolt-on trailer hitch to install on a trailer then the Adjustable Width Trailer Hitch Receiver for RVs part # 13703 is your best option because it fits all different types of trailers such as those with an i-beam frame and it can be bolted on as you mentioned. The bolt holes would obviously not be present so what you would need to do is remove the side plates from the hitch and then use those on the side of the trailer frame as a template for drilling. The cross...
    view full answer...
    Image 1 for
  • Best Rear Hitch Options 2016 Montana High Country 362RD 5th Wheel
    You could go with the Lippert 2" Trailer Hitch Receiver for Campers and Trailers # LC730647 you were looking at, but because this only hitch has a 300-lb tongue weight rating I believe there is a better solution. I recommend going with the Curt Adjustable Width Trailer Receiver # 13703 , because it has a slightly higher 350-lb tongue weight capacity. You'll want to measure the frame width on your Keystone Montana High Country 362RD to make sure that it isn't wider than 72", but as long...
    view full answer...
    Image 1 for
  • Recommended Frame Mount Trailer Hitch for 2018 Airstream Trailer
    For your 2018 Airstream FC 28 I recommend taking a look at the Curt Adjustable Width Trailer Hitch Receiver # 13703. This is a really versatile hitch that's designed specifically for trailers and RVs and it will fit frame widths between 22 and 72 inches. It will work on box frames, C-channel frames, or I-beam frames and it can be either bolted on with the included hardware (you will need to drill into the frame) or welded on if you change your mind. The Class III hitch will provide you...
    view full answer...
  • Availability of Trailer Hitch for Keyston Fuzion 390 to Tow 4-Wheeler Trailer
    We have a number of different hitch options that may work for your Keystone Fuzion 390. Trailer hitches made for RV's are not vehicle specific so you may need to take a couple of measurements to be sure a hitch will work well on your trailer. One of the most universal fit trailer hitches for an RV is the Curt Adjustable Width Trailer Hitch Receiver # 13703. This hitch is adjustable to fit RV frame widths from 22 inches to 72 inches wide. Installing the hitch can either be a weld-on or...
    view full answer...
  • Trailer Hitch that Fits 2020 Attitude Toy Hauler 3322SAG
    For your 2020 Eclipse Attitude 3322SAG the Ultra Fab hitch part # UF35-946403 that you referenced would be your best option although we haven't had chance to install it on an RV like yours. Since we know it can easily weld to I-beam frames and the width of the bracket is smaller there shouldn't be any issue.
    view full answer...
  • Recommended Hitch and Bike Rack Options for Rear of Heartland Bighorn 3610RE 5th Wheel Trailer
    Before attempting to install a hitch on the rear of a 5th wheel, I always recommend consulting the 5th wheel manufacturer to ensure that the rear structure of the 5th wheel is strong enough to handle the weight of a bike rack and the bikes it carries. I called Heartland, who confirmed that using a hitch on the rear of your 5th wheel is acceptable, but you should not under ANY circumstances use the hitch for towing. Although the capacity of the hitch might be greater, Heartland states that...
    view full answer...
  • Recommended Weight Distribution Hitch to Pull Jayco Jay Feather
    Thanks for the info on what trailer you are getting and there is a great option for a weight distribution system to use with your 2009 Dodge Journey and 2015 Jayco Jay Feather x17z. I highly recommend the the Fastway e2 Weight Distribution # FA92-00-0600 because it will keep you level and control trailer sway with its spring bars, uses clamp-on brackets so no drilling is required for installation, and allows backing up with the system in place, which is not possible with all weight distribution...
    view full answer...
  • Trailer Hitch for Keystone Springdale Travel Trailer to Carry Bikes
    There is a way for you to carry bikes with a trailer hitch on your 2016 Keystone Springdale 270LE, though based on my research it does have a square bumper, so you would need either the Curt RV Bumper 2" Trailer Hitch # E-100 if the bumper is 4" x 4" square or the Buyers Products RV Bumper Receiver Hitch # 337RVA24 if your bumper is 4-1/2" x 4". The reason you need one of those instead of something like the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403 is because...
    view full answer...
  • Is It Possible to Install Trailer Hitch on 2006 K-Z Escalade Trailer
    It is absolutely possible to install a trailer hitch on your 2006 K-Z Escalade trailer; it will only require that your trailer have a box frame, C-channel frame, or I-beam frame that is between 22 inches and 72 inches wide. Should your trailer have that you will be able to use the Adjustable Width Trailer Hitch Receiver for RVs # 13703 which will can either bolt or weld onto your trailer's frame. This is a Class III hitch with a 2 inch receiver but please keep in mind it will require the...
    view full answer...
  • Trailer Hitch Recommendation for a Trailer with an I-Beam Frame
    For an I-beam frame trailer I have a better solution than the # UF35-946403 that you referenced. Instead you would want the part # 13703. I attached a picture that I took from that attached install instructions that shows how it would install on an I-beam frame.
    view full answer...
    Image 1 for
  • Which Trailer Hitch will Fit RV Frame Width of 74 inches from Outside to Outside
    We have a hitch that would work great for you but the Curt hitch part # 13703 can only fit trailer frames that measure up to 72 inches apart from outside to outside. So since yours measures 74 it would be too wide you'd instead want the part # UF35-946403.
    view full answer...
  • Best Hitch for the Back of my Keystone 5th Wheel
    We have a couple of great options for you like the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide part # C13704 that you looked at. It is designed to work with frames anywhere from 22" up to 66" If your frame is wider then the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames part # UF35-946403 is the way to go because it will work with frames up to 77" wide. Both come with all of the hardware you will need to complete your installation. To decide which one is...
    view full answer...
  • Trailer Hitch Recommendations for a 16 Foot Airstream Bambi Sport Travel Trailer
    I am not sure what the problem is at the front of the frame of your Airstream trailer. Especially since at the front the generators would be supported in more than one spot. At the back the frame would have to support the hitch and a carrier with the generators in the carrier. Now at the front it does increase the tongue weight of the trailer and that would make it possibly too heavy for the trailer hitch on the tow vehicle or for the tow vehicle itself. For a hitch I recommend something...
    view full answer...
  • Recommended Receiver Hitch for Rear of Forest River Fifth Wheel
    I'd begin by contacting Forest River to ensure that the frame members at the rear of your fifth wheel have sufficient capacity to carry the weight of the carrier and the scooter without damaging anything. If Forest River gives you the go-ahead, I'd recommend the # UF35-946403 hitch, which is compatible with frame members that are between 47-3/8 to 77 inches apart, measured from the inside of the frame. This hitch is a weld on application, and has a 350 lb tongue weight capacity, meaning...
    view full answer...


< Previous
123. . .8



Do you have a question about this RV and Camper Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv and camper hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Halie H
Updated by:
Halie H
Employee Noah M
Updated by:
Noah M
Employee Zach D
Video Edited:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624