etrailer RV Bumper 2" Trailer Hitch Receiver
(23 reviews)
Price: $52.15
In Stock
etrailer RV Bumper 2" Trailer Hitch Receiver
Item # e38HR
Retail:$58.35
Our Price: $52.15
You Save: 11%
In Stock
- All Info
- Reviews (23)
- Q & A (0)
- Photos
etrailer RV and Camper Hitch - e38HR
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- 4-1/2 x 4 Inch Bumper
- 3500 lbs GTW
- Bolt-On
- 350 lbs TW
- 2 Inch Hitch
- etrailer
Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.
Features:
- Has 2" square receiver opening, ideal for hitch accessories such as bike racks and cargo carriers
- Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers
- Fits 4 x 4-1/2" bumpers when using second set of holes
- Matte black powder coat finish resists corrosion
- Includes mounting hardware
- Weight capacity: 3,500 lbs GTW / 350 lbs TW
Specs:
- Application: 4" x 4" and 4" x 4-1/2" Square RV bumpers
- Overall dimension: 8" tall x 4" wide x 5-1/4" deep
- Hitch weight: 7.4 lbs
- Limited lifetime warranty
Note: Bumper weight capacities vary by manufacturer. Please be sure to verify the weight capacity of your bumper with the manufacturer prior to loading.
Two Different Mounting Options
This etrailer RV bumper gives you the flexibility to mount your hitch receiver above or below your RV bumper. You can mount your hitch receiver below the bumper if your camper body hangs over your bumper. You can also mount it above to give your bike rack or cargo carrier an extra 6-1/2" of clearance to avoid scraping on uneven surfaces when entering or leaving parking lots or crossing roads.
e38HR RV Bumper Trailer Hitch Receiver - 2 Inch
Installation Details
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
etrailer RV Bumper 2" Trailer Hitch Receiver - e38HR
Average Customer Rating: 4.6 out of 5 stars (23 Customer Reviews)
Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.by: Al08/18/2023
This product aloud me to carry my generator on my camper without breaking the bank Paul was very helpful very fast delivery my local camping store couldn’t offer me any of the items that etrailer had in stock
by: Brian 06/03/2023
Exactly what I was looking for. My bike rack works perfectly with it.
Another excellent product from eTrailer.
I highly recommend eTrailer to everyone. Excellent products, selection, and service.
by: Terry 04/19/2023
The steps were great!(previous order) instructions,easy. I'm not sure if like pop rivets depending on the structure me with a bum leg (aviation background). It will work ! The hitch a piece of cake ounce we had the pin holes oriented proper. Tank cover, Kool. I'm happy with everything and the service excellent.
by: Leonard 02/22/2023
Overall it's good. But because of clearance between the bumper and the body of my trailer, I had to install it upside down. I'm only using it for a cargo carrier so it works for that. I didn't notice the clearance measurement as something to check beforehand.
by: Ken06/21/2023
This is a much better quality receiver than the one on Amazon. I seen pictures of the one on Amazon where the welds broke. The bikes fell onto the hwy.
by: Stephen12/23/2022
Shipped fast ...very good quality...very easy to install both items....pleased with purchase
by: Roger 06/12/2023
Great fit. Very sturdy.
by: Robert12/23/2022
Received what I order undamaged or parts missing in a very timely fashion, job well done.
thank you and merry christmas
by: Suzanne 01/06/2023
good quality
by: Jeff 07/13/2023
by: Steven 07/05/2023
by: Stuart 09/19/2023
by: Ken03/16/2023
by: Gary 06/01/2023
by: Kerry 03/08/2023
by: Jason 06/20/2023
by: Dale 10/24/2023
by: Charles 10/13/2023
by: Floyd 02/21/2023
by: Gerard 07/28/2023
by: Chris 03/31/2023
by: John 04/14/2023
by: Craig 12/02/2022
23
23
See what our Experts say about this etrailer RV and Camper Hitch
- Hitch Pin to Use with etrailer RV Bumper Hitch part # e38HRThe etrailer hitch part # e38HR is a standard 2 inch hitch so for a hitch pin the part # PC3 would be what you would need.
view full answer... - Bumper Mounted 2" Receiver For Carrying a 1-1/4" Swagman Bike Rack With 2" AdapterIt sounds like you are looking for a RV Bumper 2" Trailer Hitch Receiver # e38HR. This will fit a 4" deep bumper which is either 4" or 4-1/2" tall. It will give you a 2" receiver which will allow you to use the Replacement 2" Adapter # SP323 with your compatible Swagman 1-1/4" bike rack. If you have a different size bumper or are needing something different please let me know so I can help you find the correct parts.
view full answer... - Recommended Cover for a 2021 Dutchmen Coleman Lantern 263BHThe 2021 Dutchmen Coleman Lantern 263BH measures 30.5' long end to end. In order to find the correct cover for this, you'll need to subtract 3' for the tongue. I recommend the Adco Olefin HD RV Cover for Travel Trailers part # AD87ZR which works in all climates. The Adco Olefin has weighted buckles for an easier installation, zippered panels for entry while in use, and cinch ropes for a tight custom like fit.
view full answer... - Can etrailer Hitch Install on 2022 Grand Design Imagine XLS 23 LDE to Carry E-Bike RackThe street bikes you want to carry with the Swagman e-bike rack # S94FR would need to weigh less than 70 lbs for the rack to have the needed capacity. So assuming your bikes weighed each 70 lb plus the weight of the carrier which is 60 lb this would put you at 200 lbs total which is less than the tongue weight capacity of the etrailer RV bumper hitch part # e38HR which is rated for 350 lb tongue weight. So the hitch itself would be strong enough but what I can't answer is if your bumper...
view full answer... - Can the Flint Hill Goods cargo carrier be used on a travel trailer?Yes, the Flint Hill Goods 22" x 49" Cargo Carrier - 2" Hitch # FHG27ZR you were checking out will work just fine on a travel trailer. Typical cargo carriers, such as this one, don't have a rating or restriction for travel trailers, but it's still a good idea to keep in mind that it will have more vibration, wobble, and overall stress compared to on a passenger vehicle. If you don't have a trailer hitch receiver on your travel trailer, I would check out etrailer RV Bumper 2" Hitch # e38HR...
view full answer... - Can a Trailer Hitch Be Installed on the Rear Bumper of a Heartland North Trail TrailerThe brackets which hold the rear bumper to the trailer frame are not always up to the task of hauling extra gear. In order to confirm we must recommend reaching out to the trailer manufacturer to see if and how much you can carry. If it's not rated or not high enough for what you need, we offer support brackets which will strength the connection between the bumper and frame. The Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets part # MO34VR is what I recommend. This would...
view full answer... - How To Carry 2 Ebikes With Wide Tires On A Travel TrailerWe have a perfect solution for you! In order to transport 2 electric bikes with 5" tires on your travel trailer, I recommend going with the Swagman E-Spec Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount # S94FR. This can hold 2 bikes weighing 70lbs each, but you'll need to also grab Fat Tire Kit # S64679 for your 5" wide tires. If you don't have a hitch on you travel trailer yet, you'll want etrailer RV Bumper 2" Trailer Hitch # e38HR if you have a rear bumper, or Adjustable...
view full answer... - Best Way to Carry E-Bikes on Travel Trailer with 4" BumperWhile the Swagman Bumper Mount Racks, parts # S80600 and # S80605, do give you some mounting options, these are designed for lighter 30 lb bikes so the bars that hold the bikes up aren't really designed for heavier 60 lb e-bikes. Since this is the case I recommend going with a different setup. For your application I recommend installing the etrailer RV Bumper 2" Trailer Hitch Receiver # e38HR and then using the Swagman E-Spec Bike Rack # S94FR and swapping out the standard trays to the...
view full answer... - Will The SafetyStruts MO34VR Allow For Enough Strength to Carry 130lbs of Bikes on Travel Trailer? The Mount-n-Lock SafetyStruts # MO34VR simply add additional strength to the rear bumper on your 2022 Keystone Travel Trailer. To determine if you will be able to then attach a Bike Rack # S94FR using a 2" Receiver # e38HR you will need to contact Keystone. They will be able to tell you how much weight your bumper and frame can support. Do note this bike rack weighs 60lbs and is capable of supporting 2 bikes up to 70lbs each. If Keystone says their bumper is not structurally strong enough...
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Installed by:
Andrew K
Installed by:
Andy C
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Jonathan Y
Updated by:
Wilson B
Updated by:
Carrie H
Updated by:
Justice A
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.