Don't Miss These Holiday Savings!
Strut-assisted RV steps easily lift and lower with a finger, and the legs individually adjust to uneven ground to provide a wobble-free step into your camper. Fits a threshold-to-ground height between 36-1/2" and 42-1/2".
Features:
Specs:
If you've ever stepped into a camper that has standard metal steps, you've probably felt that scary springboard effect that makes you reach for the handle. That bounce occurs because those pull-out steps never touch the ground. Fold-down steps have adjustable legs that steady the steps on the ground, so you can feel safe using them. Also, fold-down steps store behind your camper door, which means they aren't left out in the elements to rust or warp like factory steps.
But what makes these MORryde steps different from other fold-down steps, like the Lippert SolidSteps? The StepAbove has a couple advantages over the SolidStep.
First, the StepAbove steps with strut assist make it easy to use the steps. The gas-powered struts are built in on either side of the assembly and use air pressure to easily lift, lower, and hold the steps in place in any position. The struts also keep the steps in place when folded into your doorway. They make maneuvering the steps so easy you can do it with one finger.
Second, unlike the SolidSteps which have a solid backplate on the top step, the StepAbove has a backplate with large holes. These holes make it easy to sweep the steps free of dirt and debris before folding them up into your doorway, so you aren't stuck cleaning up your entry after every hike or trip.
Fold-down steps are typically installed on travel trailers and 5th wheels. The fold-down steps from MORryde install inside your camper's door frame and lift up to latch into the doorway for storage. To ensure that you choose the correct size for your application, follow these 3 easy steps:
Step 1: Measure the Entry Height
Measure from the doorway threshold on your camper to the ground. For these steps to work, you will need an entry height between 36-1/2" and 42-1/2".
If you find that you have a smaller or larger entry height, there are other step assemblies that fit entry heights ranging from 25" to 42". (See table below.)
Step 2: Measure the Doorway Width
Measure from the inside of your door flange to the inside door flange on the opposite side. Your doorway will need to be between 23-3/4" wide and 24-1/4" wide for these steps to work.
If it turns out that you have a wider or narrower doorway, there are other step assemblies that fit doorways ranging from 21-3/4" wide to 30-1/2" wide. (See table below.)
Step 3: Measure the Threshold
Measure the rise of your threshold. The distance between the floor and top of the threshold must be between 5/8" and 3/4". If the height of your threshold is outside of this range, the doors may not close properly.
To allow room for the hinge plate, there must be a gap of at least 3/8" between the threshold and the bottom of the entry and screen doors. If the gap is too narrow, the doors may not close while the steps are down.
If, after taking your camper's measurements, you find that these steps will not work for you, use the table below to determine which part number you need.
| Doorway Width | Entry Height | etrailer Part Number |
|---|---|---|
| 21-3/4" - 22-1/4" | 25" - 29" | MR86RR |
| 30" - 33" | MR58RR | |
| 34" - 36" | MR38RR | |
| 23-3/4" - 24-1/4" | 25" - 29" | MR26RR |
| 30" - 31" | MR98RR | |
| 32" - 33" | MR98RR, MR45RR* | |
| 34" - 36" | MR48RR, MR45RR* | |
| 37" | MR88RR, MR45RR*, MR75RR* | |
| 38" - 42" | MR88RR, MR75RR* | |
| 23-3/4" - 26-1/4" | 25" - 29" | MR26RR |
| 30" - 33" | MR98RR | |
| 34" - 36" | MR48RR | |
| 37" - 42" | MR88RR | |
| 27-3/4" - 28-1/4" | 30" - 31" | MR68RR |
| 32" - 33" | MR68RR, MR65RR* | |
| 34" - 36" | MR78RR, MR65RR* | |
| 37" | MR28RR, MR65RR*, MR85RR* | |
| 38" - 42" | MR28RR, MR85RR* | |
| 27-3/4" - 30-1/4" | 30" - 33" | MR68RR |
| 34" - 36" | MR78RR | |
| 37" - 42" | MR28RR |
*Strut-assist model
Alternate Instructions
Average Customer Rating: 4.7 out of 5 stars (735 Customer Reviews)
Strut-assisted RV steps easily lift and lower with a finger, and the legs individually adjust to uneven ground to provide a wobble-free step into your camper. Fits a threshold-to-ground height between 36-1/2" and 42-1/2".We really like our new steps. Video of install doesn’t quite sow the full install and this caused us to pause as we had to do some changes on the inside right side below fridge. The strut part of frame required some changes bro storage below fridge
My wife really appreciated us upgrading to the 4 step MORyde replacement for the 3 stepper.
Great products, great price and always great service. Another satisfied purchase from etrailer for ne!
THIS MUST BE YOUR FIRST UPGRADE IF YOUR CAMPER DIDNT COME WITH THESE STEPS…
I finally got time to install it! It took more time to read the instructions (2 times to be sure) than putting them on the camper, it is like day and night, no more rocking the whole camper as you enter or exit, no more twisting the aftermarket “stabilizers” I had on my old steps, and best of all, no more wobbling when you step on it. Don’t be discouraged if at first it doesn’t look like it’s gonna work, I thought I was gonna have to shave a piece of my screen door when I first tested it because the latch wouldn’t let it close, but after I tightened all the screws to the floor it close just fine (a little snug but latched with no problem) without any modifications to the door.
This product is great, it came perfectly packed (I was a little worried as some people said theirs got bent or was missing parts), delivery was fast, and I have to give etrailer customer service 5 starts also because if they wouldn’t have answered all my questions and concerns when I was in search of these steps I probably would have never bought them. So as of today I’m a very happy customer, and absolutely recommend etrailer and it’s products for any campers needs… as for the handle for the steps ($[XX] extra) it works but not really thrilled about its looks or firmness to be used as a safety hand rail.
Excellent quality steps are very sturdy. Easy installation. etrailer is a great company to deal with especially if you have a return no hassle return. My first choice when looking for items!
Ordered MORryde StepAbove RV Steps for my Rpod 196. They fit perfectly! I had to make one small adjustment since on the 196 the door does not open completely due to the tire fender. For this install, the stairs are not exactly centered in the doorway, This is NOT a problem. a little adjusting of the doorway latches and it works perfectly. This is a HUGE improvement over the stock steps and we are thrilled with the sturdy steps and the additional width and depth they offer. Another thing to consider, installation is EASY! Anyone could put one of these on their RV. The hardest part of the entire job was lugging the awkward box to the trailer.
I have ordered from etrailer in the past and, as always, service and communication is superb.
Shipping and installation is 5 Stars. My issue is the sides of the steps as it seems as they were crushed when installed. This is a finish and final inspection issue. The sides of the steps where they meet the frame. I have included pictures. They work well.
When I received my steps the box was heavily damaged. When I went to install the steps I found that they were bent. I contacted etrailer the representative said it was a shipping problem and he would have to get back to me.
Eric did a great job helping me select the exact part number that I needed to replace my old Windjammer steps. I am somewhat disappointed in the finish of the steps. Not sure if they expedited one of their quality processes to ship an order. I have displaced some of these issues in the attached pictures.
Tested them for fit today and all is well. In the attached photo the steps appear to be setting crooked, but that may be the result of the RV not setting level and / or on one side of the threshold there is what appears to be a zurk fitting that has to be remove so the top is not setting flat.
Just got back from a month long RV trip so this was the first time I had a chance to review this order. They delivered after we left for New England.
Completed the step install today. etrailer offers any great RV products and the MORryde assist steps are great. I've purchased other MORryde products from you before and have always been pleased with your service. I have to say that the quality of the manufacturers packaging is terrible. Parts were loose and the assist frame required some straightening before I could install it.
I haven't been able to install the MaxAir exhaust fan, but will do so in a week or so.
Excellent update to our 2017 Heartland Road Warrior. Also installed friction hinges to replace the factory door limiter arm to keep the door from slamming into the side of the RV. Purchased the Strut Assist as well for one finger lifting
Great upgrade giving better ground clearance while boondocking. VERY easy install. I also got the storage box to fill the void. Works great as well.
STAIRS FIT WELL AND WERE EASY TO INSTALL. MAKES GETTING IN AND OUT OF THE TRAILER MUCH EASIER. STAIRS LOCK INTO PLACE WHEN NOT IN USE. I AM VERY HAPPY WITH THE PRODUCT!
My relationship with the MORryde steps is a love/hate relationship. I purchased these steps as a replacement for the generation 1 steps that came with the trailer after I damaged the original steps. I love that the steps rest on the ground resulting in a solid step with no sponginess when you step on them. I also like that when folded up they protect the screen door from our dog, I hate that any dirt on the steps drops onto the floor when they are stored and that you could could be prevented from deploying or storing them in a tight space due to their swing arc. The generation 2 steps with the detent deployment of the extension is a great improvement over the original pins.
I have not installed this yet, but I have no doubt that it will install easily. I have purchased other products from etrailer and found them of high quality and they install very easily if you follow their instruction videos. the videos are very informative and simple to do.
The installation was very easy and the stairs work great
I added a 3.5 lift kit at the same time
The only minor problem is the door hit the fender so when putting the stairs in the stored position you have to pull them to side to get past the door not a big problem
We love our step. It is much more stable than the one that came on the trailer. The dogs like it better as well. Glad that my husband is handy though as the install was a little more complicated than appeared to make it fit correctly. The only downside for me is making sure they are cleaned off well so a ton of dirt and sand(we stay at the beach alot) doesn't get dumped on the inside of the trailer every time you put them up. On the upside it created a space under the trailer where the old steps were that we had a custom box made for for extra storage of our hitch and jack blocks.
The MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps came more quickly than I expected. They were easy to install and worked well. Everything including easy to follow instructions was included. I have included photos of the finished installation and we will be posting a video of the installation on our [online video], Go With the Flow Couple.
I was pleased to receive my steps. Everything was in the box and I had it installed in about 30 minutes. I was very impressed with the quality of the stairs. I normally like to see a product in person first but the reviews were pretty good. Very happy.
Sorry a photo would not upload.
The steps are very sturdy which is what I was looking for. However, when installing (I had hinge 2) it tells you all the steps to take. When steps are lowered it tells you to make sure doors close. However it does not tell you to make sure doors close when steps are raised. So I got it all installed (very easily) but then went to close the door and door would not close. Hinge side of door the screen hits on the hinge of the steps not allowing closure. I tried adjusting the step hinge in different degrees but still could not get it to work. I ended up not locking that hinge into place and only having the hinge on the otherside keeping steps in place. Not a perfect solution but the only way I could make it work.
THESE STAIR ARE EXCELLENT BUT my door would not close- no way no how. The bottom of the door would require removing at least 3/4 of an inch to clear the mounting bracket. I tried moving into different positions but nothing helped. I was not willing to butcher my door to make the steps work. The door wouldn't ever properly seal again and it would have looked terrible. E-Trailer has been exceptional in the return process so far and I have nothing but good things to say about E-trailer. In fact, I've already ordered a set of quick connect steps from them. I've been buying since 2018 from etrailer and I will continue. Wish I would have snapped some photos to post but I didn't. Again--awesome steps--just didn't work for my application unfortunately. 2017 Pioneer DS310.
Do you have a question about this RV and Camper Step?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.