bing tracking image
  1. RV and Camper Steps
  2. Stromberg Carlson
  3. 3 Steps
  4. Pull-Out Step
  5. Towable Camper
  6. 24 Inch Wide Step
Flexco Manual Pull-Out Steps for RVs - Triple - 8" Drop/Rise - 24" Wide - 300 lbs

Flexco Manual Pull-Out Steps for RVs - Triple - 8" Drop/Rise - 24" Wide - 300 lbs

Item # SMFP-3100
lowest price pledge
Retail:$460.37
Our Price: $371.24
You Save: $89.13
RV and Camper Steps
This item qualifies for Free Shipping
Shipping Weight: 58 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Product Expert Kathleen M

Is this right For you? Product Expert Kathleen M says:

Yes, if you:

  • Camp in areas with lots of gravel or sand that you don't want to track into your RV
  • Have a trailer or vehicle that you struggle to get in and out of and need to add a straightforward step to bridge the gap
  • Have an entry height (distance from the ground to the mounting point) of 26" - 29" and a mounting place that's at least 27" x 12"

No, if you:

  • Hate feeling the whole camper rock when anyone goes in or out and prefer steps that make contact with the ground
  • Get annoyed when you have to supply your own hardware and want everything you need in the box
  • Have bad knees, back, or hips and want to avoid the diving board effect from this style of step
These 8" deep, pull-out steps let you safely enter and exit your RV. Slip-resistant steps slide effortlessly into their mounting base and lock into place for travel. Bolt or weld onto your RV. Black powder coated steel is rust resistant. Lowest Prices for the best rv and camper steps from Stromberg Carlson. Flexco Manual Pull-Out Steps for RVs - Triple - 8" Drop/Rise - 24" Wide - 300 lbs part number SMFP-3100 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (538)
  • Q & A (0)
  • Photos
  • Why etrailer?

Stromberg Carlson RV and Camper Steps - SMFP-3100

  • 3 Steps
  • Pull-Out Step
  • Towable Camper
  • 24 Inch Wide Step
  • Stromberg Carlson
  • 28-1/8 Inch Wide
  • Steel
  • 8 Inch Drop/Rise
  • No Ground Contact

These 8" deep, pull-out steps let you safely enter and exit your RV. Slip-resistant steps slide effortlessly into their mounting base and lock into place for travel. Bolt or weld onto your RV. Black powder coated steel is rust resistant.


Features:

  • Manually operated RV steps make it easy to get into and out of your motor home
    • Simply pull steps out for use and position back in place for travel
  • Non-slip surface with oval tread holes provides sure footing
    • 1-1/2" Wide strip of grip tape on edge of steps offers additional traction
  • Rust-resistant black powder coated steel is strong and durable
  • Easy bolt-on or weld-on installation
    • Mounts to RV frame in same manner as original steps
    • Mounting hardware not included
    • May require outriggers (sold separately) for installation
  • Made in the USA


Specs:

  • Entry height: 26" - 29"
  • Step dimensions: 24" wide x 8" deep
  • Mounting bracket dimensions: 27" wide x 14-1/2" tall x 12" deep
  • Drop/Rise: 8"
  • Weight capacity: 300 lbs
  • 1-Year warranty


STCL 3100 Dims

STCL 3100 Dims 2

STCL 3100 Dims 3

Will Flexco Pull-Out Steps Work for You?

Pull-out steps are typically installed on travel trailers. The Flexco pull-out steps from Stromberg Carlson are easy to install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.


Mounting Bracket Stromberg

The Lippert pull-out steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. You will need a mounting space that is at least 28-1/8" wide and 12" deep.


If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 21-1/16" wide to 28-1/4" wide. A full list of the available steps is below.


Outriggers for RV Steps

Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.


Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.


How Many Steps Do You Need?

Entry Height Stromberg

To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 3" to 9" to account for the drop from the bottom steps to the ground. This measurement will also tell you how many steps you need.


The chart below displays mounting bracket width measurements in the first column and entry height measurements in the second column. The third column shows the corresponding part numbers. Use the mounting bracket width and entry height measurements you took to determine which part number will fit your RV. Choose the bracket size that is closest to your measurements without going over.


This page's step assembly is in bold text.


Mounting Bracket Width Entry Height Part Number
21-1/16" 14-1/2" - 17-1/2" SMFP-1120
23-5/8" 19" - 22" SMFP-2120
24-1/4" 10-1/2" - 13-1/2" SMFP-1220
25" 14-1/2" - 17-1/2" SMFP-1100
26" 19" - 22" SMFP-2100
27-1/8" 30" - 33" SMFP-3200L
28-1/8" 26" - 29" SMFP-3100
28-1/8" 34" - 37" SMFP-4400
28-1/4" 10-1/2" - 13-1/2" SMFP-1200


How Do You Install the Steps?

To install the steps:

  1. Make sure the camper is level on flat ground
  2. Lift the steps into the mounting space and prop into place
  3. If needed, mark the mounting holes on the camper and drill

    -Set aside steps before drilling

  4. If needed, install the outriggers
  5. Align step mounting holes and secure in place with carriage bolts and flange lock nuts

    -Make sure the bracket is backed up fully against the I-beam on the chassis

    -Hardware not included

  6. Tighten hardware until snug
  7. Make sure assembly is sitting square and level
  8. Torque the hardware tight


SMFP-3100 Stromberg Carlson Flexco Manual RV Steps - Three - Black - Folding - 24 Inch




California residents: click here



Customer Reviews

Flexco Manual Pull-Out Steps for RVs - Triple - 8" Drop/Rise - 24" Wide - 300 lbs - SMFP-3100

Average Customer Rating:  4.8 out of 5 stars   (538 Customer Reviews)

These 8" deep, pull-out steps let you safely enter and exit your RV. Slip-resistant steps slide effortlessly into their mounting base and lock into place for travel. Bolt or weld onto your RV. Black powder coated steel is rust resistant.

by:

The hole placement was a little different. Couple quick portable drill mods and the steps were in quickly. The shipment was quicker than expected. Quality of the product was perfect. Staff was very helpful. I highly recommend etrailer.


Comments
Still hanging in there. It has held up under all the comings and goings.
Gary S - 12/07/2020


by:

It would have been nice if you spend $xxx that you would have gotten the mounting brackets with your item. Very disappointed.


Comments
If you are talking about the outriggers, they are, at times, not needed, which is why they are sold separately. The item you need is item # LC301704
Lippert Outriggers for Manual and Electric RV Steps
$72.23
.
-- Etrailer Expert Sierra K - 06/15/2022


by:

We received exactly the item we ordered in the timeframe we were quoted. Since time was a factor in receiving and then replacing, my husband and I were pleased when the item arrived even sooner than we anticipated. We were able to replace the old item with the new item without any complications. etrailer is now our “go to” company for all of our camper/camping needs.


Comments
Like brand new. We will be replacing the second door steps with the same product this camping season.
Roxanne - 03/25/2020



by:

I couldn't be any more satisfied with the new steps, or the help Angela provided me in the selection. The steps were a perfect match for the damaged ones on my 2008 Heartland Sundance. Used a floor jack to hold them up in place, 4 bolts to the main support bracket, 2 bolts to the back braces, and it was done in less than 3o minutes. Please see the pictures.




by:

These Stromberg-Carlson Flexco Manual Pull-Out Steps for RV'S - Triple - 8" Drop/Rise - 24" Wide - 350 lbs - SMFP 3100 we ordered from etrailer.com were the exact ones that came on our 32.5' 2014 Windjammer trailer by Forest River when we purchased it new. The original steps got bent when we were forced off the shoulder of the highway, causing the rear axle to drop over the edge of the road and drag on the pavement about a short distance before we could stop, bending the stairs and making it nearly impossible to lower them. Fortunately, the mounting brackets were not comprised or bent. Once we placed our order, we received the replacements from etrailer.com in just a few days. My husband had them installed in short order. They look great, and match the stairs at the other door perfectly. The price was very reasonable and customer service very helpful, pleasant and courteous. We would recommend this product and etrailer.com without hesitation.07p




by:

Very good customer service and shipping /delivery!




by:

These steps are solid, easy to open and close , reasonably priced, super fast shipping, easy to install and made in the USA !! I am very happy with my purchase.




by:

The new steps were indentical to the old ones except they were not bent up like the old ones. I had to straighten up a bracket that the steps bolted onto. Once that was done they fit right on. It is difficult to get the carriage bolts started because on space limitations. Other than that it not that difficult. The new steps fit great.


Comments
The steps work fine. I had to do some straightening on the brackets that hold them in place to get them to retract properly. Bent brackets not a problem with the steps. Still working fine.
Bob - 05/13/2019



by:

I built a shooting house on a trailer that was 30 inches from the ground. I needed the steps to get into the back door of the shooting house, which is on wheels. If I need to move it, fold up steps was the way to go. I also needed fold up steps as the house is sitting on four jacks, one on each corner for total stability. They also fold up if I need to move the house. The steps allowed me to fold up the jacks without
interference from the steps. The steps are exactly what I needed for this project.
The steps support me as I hoped they would as I enter the house. An excellent product.




by:

Perfect replacement steps for your 5th wheel... Easy to install. Great customer service and delivery.


Comments
Excellent product.
Sue - 09/09/2016



by:

Prompt service and product fits well. Stairs seem to be a little harder to use and not quite as stable as original. Stairs are overall a good product for the price.


Comments
Same as before.....the stairs fit well, but are not as easily used as the originals
Jay R - 02/26/2018



by:

The whole process and product are a 5 star rating. Ordering was easy and shipping on time. The steps are sturdy. Great down and out angle and I like the 9" width which makes getting in and out of the RV easy.


Comments
No problems..still an excellent product
Dale - 06/01/2017



by:

Product was exactly as described. Very good quality and was easy to bolt up and replace my existing steps. Would buy products from this company again.


Comments
Yes the item works great. We thank you for your help! Still using the steps and the camper!
Justin - 12/19/2017



by:

The steps were a dead on replacement, bolt hole wise, for my old steps. I also must say they are much stronger and sturdier than the original steps. Very happy with the quality and service I received from etrailer.com.




by:

Replacement of my travel trailer steps. Installed the mounting hardware from the old steps on the new steps. With the help of a floor jack it only took 10 minutes to install. They work and fit great.




by:

Great service. These are exact replacements for the steps on my Rockwood 8310ss travel trailer. My original steps caught the end of a high curb while entering a campground and no longer opened. It took three days from ordering to ups placing the new steps infront of my garage. The steps were exactly as described and will only require bolting onto the existing brackets.




by:

We ordered these Flexco RV steps as a replacement after a minor accident that ruined the original steps. Our order arrived much sooner than expected, which was excellent as it was quite dangerous using the old ones. These steps actually seem to make entry and exit of our RV easier; they don't seem quite as steep as the original steps. Would definitely order from etrailer.com again. Great service.




by:

After one year the steps work great. They have not show any sign of loosing there sturdiness. Very pleased with them and would recommend them to others.




by:

Although product was acceptable it was not OEM dimensions even thought it was produced in 2016. Additionally, the stabilizer jack is small, rinky-dink, and of little use for the application advertised by manufacturer.

Of course these issues do not diminish the outstanding serviced I received from etrailer.com. My etrailer.com representative could not have been more outstanding and helpful. The order was processed, shipped and delivered in just three days and my representative stayed in constant communication throughout the process. I encourage all friends and the RVes of America to use this companies service. GREAT JOB




by:

This product was completely described and accurate. The measurements were given in enough detail that I knew it would fit my trailer and attach easily. Would certainly buy from this supplier with future needs.


Comments
Cant say now as I have replaced the RV.
Dennis S - 09/16/2017



by:

This product was delivered on time and I was impressed with the quality. I needed to make a small adjustment to my existing bracket to account for the slide bar that sticks out each side of the stairs, but the bolt holes and everything else lined up perfectly.




by:

Steps were in perfect condition when we got them, they were very easy to install and we have had absolutely no problem with them since the purchase. That, in itself, is saying a lot, as we are full time RVers and use them every day.




by:

After smashing my steps against a parking lot light standard i ordered identical steps from etrailer. The steps, item # SMFP-3100, are priced right and the quality is acceptable. They operate as designed with little effort. We travel months at a time and use our steps frequently. I certainly would recommend this product to anyone.




by:

The Steps were very easy to install and are very stable and look great on the travel trailer that I installed them on . I'am thinking about purchasing a set for my own fifth wheel trailer .




by:

Perfect replacement, Customer Service (Hellen) was the best! Old steps broke 3 days before leaving on a trip, Hellen made sure we had new ones in time. She kept us informed when they left the warehouse and every step of the way. Would not ever hesitate to order from trailer again!



25
538
Show More Reviews

See what our Experts say about this Stromberg Carlson RV and Camper Steps



  • Overall Width of the Lippert Hickory Flexco Pull Out Triple Step
    The outside to outside width of the Lippert Steps # LC341501 which would be the same as the Hickory steps are 27-1/2 inches wide. I attached a dimensional picture that shows this as well. Lipppert manufacturers the Hickory steps. A few years ago, Lippert bought Hickory, but kept the Hickory name on many products. The Lippert steps that we carry are the same as the Hickory steps.
    view full answer...
    Image 1 for
  • Selecting Replacement Manual Entry Steps for Heartland Travel Trailer
    Since RV makers don't maintain specs on the items like steps that they install on their travel trailers you'll just want to measure the overall size and mounting hole spacing on your existing steps to confirm compatibility with the Flexco Manual Pull-Out Steps # SMFP-3100. Based on the photos of your Heartland that I reviewed these Flexco steps appear to be a great choice. The overall mounting base dimension of the Flexco steps is 24 x 9-inches. The mounting bolt hole pattern can be either...
    view full answer...
  • Would Triple Step SMFP-3100 Fit a 2014 Wildwood X-Lite
    I pulled up pictures of your 2014 Wildwood X-Lite and it looks like it normally comes with a double step. The Triple Step part # SMFP-3100 would work if you are looking for an additional step to make getting into the trailer easier. This step is designed to fit the mounting brackets of nearly all fifth wheel trailers but in a worst case scenario you would have to move the mounting brackets.
    view full answer...
  • Will Flexco Triple Step SMFP-3100 Fit 2003 Lance Camper 1161
    The Flexco Step part # SMFP-3100 would be a great option for you as it has a 350 lb capacity and when extended provides a third step that would be roughly 19 inches from the ground on your camper.
    view full answer...
  • How to Determine if Lippert or Flexco Manual Steps Will Fit a Trailer or RV
    It is possible that either the Flexco steps, # SMFP-3100, will fit your trailer. You just have to go by the mounting hole measurements for each. The Flexco steps are also 7 inches on center front to back but 25-3/8 inches left to right.
    view full answer...
    Image 1 for
  • How To Decide Which RV/Camper Steps Are Right For You
    I do have a few options for you to consider however, we currently do not have a 3 step pull-out staircase with 24" wide steps for mounting brackets 25-1/2" wide. The correct way to measure the mounting brackets for your steps would involve recording the length from the center of each bolt hole on the brackets attached to the frame. The mounting dimensions of our 3 step pull-outs for 24" steps are generally anywhere from 25-27". For a mounting base dimension of 25-1/2", I recommend using...
    view full answer...
  • Could Flexco Triple Step Replace Flexco Double Step
    The 3 step Flexco part # SMFP-3100 is going to be wider than the 2 step that you currently have. Most likely you'd be able to remove your current mounting brackets and place them closer which would allow you to install them. This is a pretty common solution as long as the opening on your RV is wide enough to allow the added width to fit. It should be but it's worth checking.
    view full answer...
    Image 1 for
  • How to Measure RV to Find Correct Size Replacement 3-Step Stair Assembly
    RV makers typically do not maintain detailed specs on items like the step assemblies they install in production of their trailers like your 2017 Keystone Premier 26RB bumper-pull. Based on my research your OEM step unit was a 3-step manual type. The easiest way to find suitable replacement steps is to measure the mounting hole spacing where the original steps are installed.The linked page displays all 3-step units, such as the Flexco # SMFP-3100. This step assembly is 24-inches wide,...
    view full answer...
  • How Do the Pull Out Steps part # SMFP-3100 Pull Out Once Installed on an RV
    If you check out the review video I attached you can see that the Pull Out Steps part # SMFP-3100 pull out very easily by just pulling out on the step and lowering them in one motion.
    view full answer...
  • Replacement Steps for 1995 Airstream Travel Trailer
    In order to find the correct fit for your 1995 Airstream, you will need some additional measurements. First, we will need the width of one of the steps. This will narrow down our choices. From the mounting bracket measurement you provided, your steps could be either 22" or 24" wide. Next we need to ensure that the steps will mount in the allotted space on your trailer. The simplest way to ensure a good fit is to measure the mounting hole spacing on your current steps. You'll measure...
    view full answer...
  • Could Flexco Pull Out Step part # SMFP-3100 Mount to Wall Vertically
    While the Flexco Pull Out Step part # SMFP-3100 was intended to be mounted to the mouting flange on top of the step there's no reason you couldn't come up with a way to mount it vertically to the back side of the steps.
    view full answer...
  • Could Flexco Triple Pull Out Step Fit 2015 Forest River Cherokee 16BHS Camper Trailer
    The Flexco Manual Pull-Out Steps for RVs # SMFP-3100 that you referenced can be made to fit your camper as you can always weld these in place of what you currently have or have the current brackets moved. Single steps typically have much narrower mounting brackets that triple steps. This should put the third step right near the ground though. I attached a review video for these steps for you to check out as well.
    view full answer...
  • Ground Clearance with Flexco SMFP-3100 2-Step RV Steps
    There really isn't a set ground clearance, the underside of the housing will sit 14-1/2 inches lower than the top of the mounting flanges as shown in the provided photo. If you measure 14-1/2 inches downward from where you'll mount the steps, you'll know exactly where the underside of the steps will sit in relation to everything else on the RV undercarriage. I've linked to a product description video featuring the # SMFP-3100 RV Steps.
    view full answer...
    Image 1 for
  • Will Flexco Pull-Out Triple Steps Work With Camper That Measures 31-Inches From Camper To Ground
    The distance from the mounting flange on the top of the Flexco Manual Pull-Out Steps for RVs, part # SMFP-3100 is 20-7/16 inches, so you will have about 10-inches from the ground to the first step. That may be a little more than you want to have. I have attached a couple of photos of this I recommend the Quad steps, part # SMFP-4400. This measures about 28-inches overall height from the mounting flanges to the bottom of the lowest step. Since you said you have 31-inches from the camper...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Replacement 3-Step Trailer Step Assembly for 24-Inch Mounting Hole Spacing
    We do not offer any pull-out 3-step assemblies that match your mounting hole spacing so to install a new set of pull-out steps like the Flexco Manual Pull-Out Steps # SMFP-3200L you'll just need to drill new mounting holes. I have linked you to all of our 3-step manual step assemblies. You'll want to note the retracted height of the steps you choose to ensure you maintain safe ground clearance.
    view full answer...
  • Replacement Stromberg-Carlson Triple Step For 2007 Keystone Montana 3400RL
    For the Flexco Manual Pull-Out Steps for RVs - Triple - 9" Drop/Rise - 24" Wide - 350 lbs # SMFP-3200L, the mounting base dimensions: 27-1/8" wide x 9-3/4" deep with the bolt hole pattern: 25-3/8" Wide x 5-1/2" deep (from first to second bolt hole) 25-3/8" Wide x 7" deep (from first to third bolt hole). The Flexco Manual Pull-Out Steps for RVs - Triple - 8" Drop/Rise - 24" Wide - 350 lbs # SMFP-3100 is a wider base at 28-1/8 inches by 9-3/4 inches deep but the mounting holes are in the...
    view full answer...
  • How Is the Rise/Drop for the Flexco Manual Pull-Out Triple Steps Measured
    The rise/drop for a set of RV steps like the Flexco Manual Pull-Out Steps for RVs part # SMFP-3200L is measured from the top of one step to the top of the other. These steps in particular have a 9" rise/drop. There is an 8" version of this step available as part # SMFP-3100.
    view full answer...
  • How Does Motor of Coach Two Step Replace
    I will be happy to help explain how to remove the old motor and install the new one # LC301695. The motor and gear assembly can be replaced by first disconnecting the two pin connector from the module to the motor. Next, remove the p-clamp holding the wire harness to the motor mount. Then, remove the ball joint linkage from the gear followed by the self-tapping screw that holds the ground wire. Next, remove the 3 bolts that hold the motor mount to the step base. Care should be taken...
    view full answer...
    Image 1 for
  • Triple Manual Pull Out Steps for a 2014 Keystone Laredo
    If the overall width of your existing steps is 27-1/2 inches then the Manual Pull-Out Steps # LC432687 are going to be the best option. The mounting holes are 7 inches apart on center front to back and 26 inches apart on center side to side. I have attached a video showing this and other dimensions for you.
    view full answer...
    Image 1 for
  • Triple Step and Outrigger Recommendation for RV Step Replacement
    I attached a picture that shows the install holes for the Outriggers part # LC301704. There are holes on both ends of the brackets for the steps and for attaching them to your RV. The # SM-01 would match up to the install holes of the Flexco Manual Pull-Out Steps # SMFP-3100 that you referenced as well. The side bolt holes on these steps are actually what is used to attach them to the # LC301704.
    view full answer...
    Image 1 for
  • Replacement Mounting Brackets for Stromberg Carlson Flexco Manual RV Steps
    It sounds like your RV has the outriggers or something similar. For new outriggers we have # LC301704 you can use.
    view full answer...
  • Available Types of Replacement Manual Pull-Out Steps for Class C RV
    We do offer all sorts of replacement step/stair assemblies for RVs. These include manual pull-out steps like # SMFP-3100, scissor steps like # TLA8004 and others, all shown on the linked page. You will want to match up the mounting hole spacing from your original steps since it is quite likely that one of our units will fit directly in place of it. You will also want to ensure you select a step that does not reduce your ground clearance once installed. You can simply click on the type...
    view full answer...
    Image 1 for
  • Can 2 Step of 2017 Forest River Work and Play 25WB be Replaced by 3 Step
    Going from a 2 step to a 3 step on an RV is definitely possible, but the mounting brackets are wider when going to the larger steps so you'd need the outriggers part # LC301704 to install a pull out 3 step Flexco like part # SMFP-3100.
    view full answer...
  • Travel Trailer Triple Step Recommendation that is 24 inches Wide
    The part # LC432687 that you referenced is a 24 inch wide triple step, but the rise between each step isn't 7 inches. From the first to the second step it measures 8-1/2 inches, from the second to third it is 8 inches, and from the third to the fourth it measures 7-3/4 inches. The other option we have is the part # SMFP-3100 which is also a 24 inch wide quad step, this one has 8 inches between each step.
    view full answer...


< Previous
12



Do you have a question about this RV and Camper Step?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv and camper steps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper step information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Kathleen M
Updated by:
Kathleen M
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Halie H
Updated by:
Halie H
Employee Mike S
Updated by:
Mike S
Employee Samantha S
Written by:
Samantha S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.