bing tracking image
  1. RV and Camper Steps
  2. TorkLift
  3. Truck Camper
  4. Snap-On Step
  5. 3 Steps
  6. 20 Inch Wide Step
TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 375 lbs - Black Bracket

TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 375 lbs - Black Bracket

Item # TLA7833
Our Price: $504.33
RV and Camper Steps
Shipping Weight: 29 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
8" x 20" Aluminum steps are designed for truck bed campers. Steps mount on camper and don't need to be removed for travel. Easy deployment with retention strap. Landing gear legs offer maximum stability and let you fine-tune the height. Great Prices for the best rv and camper steps from TorkLift. TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 375 lbs - Black Bracket part number TLA7833 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (160)
  • Q & A (0)
  • Photos

TorkLift RV and Camper Steps - TLA7833

  • Truck Camper
  • Snap-On Step
  • 3 Steps
  • 20 Inch Wide Step
  • TorkLift
  • 21-1/2 Inch Wide
  • Aluminum
  • 7-1/2 Inch Drop/Rise
  • Ground Contact

8" x 20" Aluminum steps are designed for truck bed campers. Steps mount on camper and don't need to be removed for travel. Easy deployment with retention strap. Landing gear legs offer maximum stability and let you fine-tune the height.


Features:

  • Pull-out steps make it easy to get into or out of your truck camper
  • Scissor design lets you manually collapse steps and fold them up for travel
    • Lockable storage bracket keeps folded steps in place during travel - no need to remove steps and store inside camper
  • Landing gear creates a stable connection from the bottom step to the ground
    • Adjustable legs help to stabilize stairs on uneven terrain
    • Large rectangular footplates provide level support and help prevent sinking into ground
    • No assembly required - landing gear comes pre-installed on the bottom step
  • Retention strap keeps your steps stowed when not in use
    • When you need your steps, unhook the strap to release them
  • Glow tape creates lighted step surface for safely climbing into and out of your camper at night
    • Adheres to sides of step platforms
    • Glows in the dark for up to 10 hours with only 5 minutes of light exposure
  • Black powder coated steel mounting bracket is corrosion resistant
  • Aircraft-grade aluminum steps are durable and rustproof
  • Built-in SureGrip tread on step surface provides excellent footing
  • Stainless steel hinges are bolted together for easy add on, removal, or replacement of individual steps
    • Bushing bearings offer smooth action and are longer-lasting that standard riveted connections
  • Made in the USA


Specs:

  • Entry height: 23-1/2" - 34-1/2"
  • Step dimensions: 20" wide x 8" deep
  • Mounting bracket dimensions: 21-1/2" wide x 12-1/2" tall x 8-1/2" deep
  • Drop/Rise: 7-1/2"
  • Weight capacity: 375 lbs
  • Lifetime limited warranty


TorkLift's GlowStep Stow N' Go steps offer stability and adjustability. The built-in landing gear legs let you fine-tune the height of the steps. And they can be adjusted independently of one another to stabilize the steps on uneven terrain, eliminating any wobble.


These GlowStep Stow N' Go steps have a bolt-on mounting base that installs on the outside of your camper. The base provides a strong and stable connection to your camper, and it attaches permanently using the included mounting hardware. When you're ready to roll, just collapse the steps, fold them up, and snap them into the base of the bracket. The stabilizing bracket not only holds the steps in place on the outside of your camper, but it also prevents unwanted movement and rattle. For ultimate security, add on a TorkLift pin lock (TLA7509 - sold separately) to lock the steps to the bracket.


Will Torklift GlowStep Stow N' Go Scissor Steps Work for You?

Scissor steps are typically installed on truck campers. The Stow N' Go scissor steps from Torklift are easy to install and lock into the mounting bracket while on the go. To ensure you choose the correct size for your application, there are a few measurements you will need to take.


StowNGo Mounting

The Stow N' Go scissor steps have a single mounting bracket that attaches to either the camper wall or the truck bumper beneath the doorway. To decide which size you'll need, locate the space available for the mounting bracket on your application and measure the width and height. You will need an area of at least 23" wide and 3-1/2" tall.


Once you have an approximation of where the mounting bracket will go, the spot you chose will be used as the "mounting point" to determine how many steps you will need.


How Many Steps Do You Need?

StowNGo Entry Height

To decide on how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, and it will tell you how many steps you need.


The chart below displays entry height measurements in the first column. The step part numbers with the 21-1/2" mounting bracket width are in the second column.


This page's step assembly is in bold text.


Entry Height21-1/2" Mounting Bracket Width
23-1/2" - 34-1/2"TLA7843, TLA7833
31" - 42"TLA7844, TLA7834
38-1/2" - 50"TLA7845, TLA7835
46-1/2" - 58"TLA7836, TLA7846


How Do You Install the Steps?

To install the steps:

  1. Find the mounting spot for the bracket on your vehicle
  2. Unfold the steps and attach to the mounting bracket
  3. Place the step assembly against the camper or bumper

    -Make sure the assembly is centered beneath the doorway

  4. Mark the mounting holes on the camper and drill
  5. Remove the steps from the bracket and set aside
  6. Attach the mounting bracket to the camper

    -Secure in place with included lag screws

  7. Attach the stairs to the mounting bracket and extend

GlowStep Accessories

Torklift Accessories

Add any of these accessories to your Stow N' Go steps for stability, eliminating gaps, and keeps your steps and RV interior clean. The GlowGuide handrail (TLA7621 - sold separately) attaches to the outside of your RV and a bracket on the bottom of the steps. This helps to steady the assembly and adds 25 lbs to the weight capacity of the stairs. The SafeStep vinyl barrier (TLA7602 - sold separately) easily fastens with Velcro strips in between any 2 steps. This prevents your or your pets from accidentally slipping between steps. The DirtDestroyer boot brush (Tla7603 - sold separately) affixes to the bottom of the steps so you can scrape your shoes before climbing into your RV.



A7833 Tork Lift Glow Step Stow and Go Scissor Steps for Truck Bed Campers - 3 Stairs w/ Landing Gear





Customer Satisfaction Score:


Customer Reviews

TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 375 lbs - Black Bracket - TLA7833

Average Customer Rating:  4.8 out of 5 stars   (160 Customer Reviews)

8" x 20" Aluminum steps are designed for truck bed campers. Steps mount on camper and don't need to be removed for travel. Easy deployment with retention strap. Landing gear legs offer maximum stability and let you fine-tune the height.

by:

Was very easy to order. Received it fast.
It
was simple to install and works as we wanted it to.
Will continue to order from E Trailer as they are very
trusted and helpful every step of the way



by:

Just installed these on my new Four Wheel camper. Had to add a 2 1/2" x3" block to accommodate the lower bolts. The steps feel very sturdy and look like they may have decent traction in icy conditions. I like that they can be collapsed and removed to store inside for driving on bumpy rough roads. I haven't been camping with these yet but i'm sure they will be safer and more stable than the foldable 2 step flimsy ladder we have been using.



by:

Arrived in a couple days to a part of the country where most Amazon orders take almost a week. Order was correct and the product is built like you would expect from TorkLift.



by:

Thanks for following up. We ordered this from you not having any previous experience with your company or products. I can say honestly we are very happy with both!



I must confess, however, these steps are not for an RV. We have an office that has a window designated for "emergency egress." Office occupants could not safely and easily access the window without steps. Moreover, to conserve space, the steps needed to be able to retract out of the way. Solution: your retractable RV steps! They are sturdy, the height is perfect and they fold out of the way-check, check, check.



I didn't go to the link you provided since our organization frowns on using external links in email. But please forward our comments to your reviews.



Glad we found these and glad for your help.



by:

Super fast shipping and the installation was a breeze.



by:

Great steps



by:

Everything went fine after second order UPS lost first order so it took three times as long to get our steps. I’m happy with the product.



by:

Well worth the money. Could not be happier. Easy to install and VERY sturdy.



by:



by:



by:



by:



by:



by:

I have a Lance truck camper in the bed of a Ford superduty 4x4 truck. The door opening to the camper is about 40" above the ground when in the truck. The two step setup that was factory installed on the camper was simply too high above the ground to use. So I installed the Torklift 5 step scissor step system. It is very easy to use, very sturdy, and easily adapts to different ground heights if the camper is parked on a slope. I fabricated a steel bracket that mounts up under the camper to the factory installed mounting studs, then bolted the scissor steps to the new bracket.



by:

These scissor steps make a huge difference for us to safely and easily enter our camper whether it is on the truck or not. I did modify one thing. The gap between the top scissor step and the truck landing was too wide and I was concerned we might step through the opening. I rectified this by attaching one of the original steps to the landing which gave an extra step and took up the space between the top scissor step and the landing. Attached pictures show this modification. The steps still fold nicely to the Arctic Fox Landing while traveling and attacing the steps to the side gave easy reach to the ladder for stability until I reach the handle on the camper itself.



by:

I have a 2022 Lance Truck camper model 825 and they came with the fold down 2 steps which did not work since my 2016 Ford F250 is lifted I added 19inch rims.
So I ordered the Torklift 5 steps to compensate for the Hight of the truck and this model worked out just right. I had to fabricate 2 L shape brackets by using 2 old bed frames made of steel and used the bolt mounts from the old steps. as you can see in the pictures. As of 2023 Lance Campers now have contracted with Torklift to add these Torklift steps to all their truck campers. This is a fine product it does what it is supposed to do. Just have to be creative when you have something that's not an easy fix.



by:

These steps are a game changer! Very sturdy and installation was fairly easy. Fellow truck campers, ditch the bounce of factory steps or the use of a step ladder and get these!



by:

The steps are great. However, the installation instructions were for a different model and the hardware bag was missing the hardware needed for my model requiring me to purchase from a local retailer. Had to call Torklift tech support to clarify installation since the instructions were not for my model. Overall poor attention to detail from Torklift manufacturing.



by:

I installed my tow N Go steps today. Instillation was easy and I think they will work well. The reason I did not give an excellent rating is because the bolt fisher TorkLift provides is two feet short of what is needed. The door on my truck camper is a touch right of center at the back. The door on the bumper is o the left so a five foot bolt fisher is needed. For the price of this unit I would think TorkLift could provide a longer fisher. I ended up soldering some single strand wire musky leader material to the provided bolt fisher to extend it. Had photos but would not upload.



by:

Install took about 30 minutes on the back bumper of my Lance camper well built nice looking product just wish the Detachment pins were a little larger but I think they will be just fine have not used them yet the Chaser wire to slide through the bumper worked very well



by:

This Torklift stairway is very well engineered and constructed. Installation instructions are very clear an concise. The only problem that I encountered was that the bolt fishing device was too short to install the center and right side bolts on a Lance camper bumper, which is open on only one end. I solved this problem by using an electrical wire crimper to add apiece of piano to the fishing device. Seethe attached photos. Neither etrailer nor Torklift tech support had a solution for me. So , here it is .



by:

I installed the steps on a popup truck camper and after a 7500 mile trip to Alaska and back they worked very well. I had to add a piece of angle under the camper to make the installation more solid. See pics



by:

The product works fine. However if I was to do it again I would of ordered a 6 step instead of the 5. When I installed it [which was easy] I discovered my truck was a tad higher than I had measured.
My wife likes the ease of climbing in the Overhead Camper when loaded on the truck.



by:

Well made, steps seem quite sturdy. The thing that frustrated me was the advertised height of 58” causes the steps to angle downward, it is hard to descend the steps. My truck was 56” and the steps are quite awkward. I would say don’t use for anything over 46” in height.



by:

Fit my custom camper perfect, easy installation I will prolly remove the steps when traveling but the setup will make it easy to put the back up and use.


25
160
Show More Reviews

See what our Experts say about this TorkLift RV and Camper Steps

  • Can TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear be Used in Place of Steps Arctic Fox
    Yes you could use the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7833 in place of the steps that are on your Arctic Fox currently.
    view full answer...
  • Collapsed Height of Torklift GlowStep Stow N Go Scissor Steps and Weight
    The collapsed height of the TorkLift GlowStep Stow N' Go Scissor Steps # TLA7833 that you referenced is 12-1/2 inches. The approximate weight is then 55 lbs.
    view full answer...
  • Could Torklift Glow Steps Fit 2014 Forest River Wildcat and Do they Come with Adjustable Feet
    As long as the entry height of your 2014 Forest River Wildcat is between 23-1/2" - 34-1/2" the TorkLift GlowStep Stow N' Go Scissor Steps # TLA7833 will fit and work great. This also comes with the adjustable feet you mentioned. See attached picture.
    view full answer...
    Image 1 for
  • What is Shipping Weight of TorkLift GlowStep Stow N' Go Scissor Steps # TLA7833
    The shipping weight of the TorkLift GlowStep Stow N' Go Scissor Steps # TLA7833 that you referenced is 29 lbs.
    view full answer...
  • TorkLift GlowStep Stow N' Go Scissor Steps for a Lance 2021 1172 Truck Camper
    The mounting brackets for the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear item # TLA7833 measure 21-1/2" wide x 12-1/2" tall x 8-1/2" deep. The steps will bolt directly to your Lance 2021 1172 Truck Camper with 3/8" bolts. They have a 7-1/2" rise with steps that are 20" x 8". They fit campers with an entry height of 23-1/2" - 34-1/2". If these dimensions do not fit your current steps or door width please send me a message with your truck campers measurements and I will be...
    view full answer...
  • Will Torklift Glowstep TLA7833 Fit 2019 Lance 1172
    Yes, the Torklift Glowstep part # TLA7833 that you referenced does fit your 2019 Lance 1172. We've had customers with your camper let us know that it fits and worked great. We will ship anywhere in the US and actually don't have ability to pick things up locally.
    view full answer...
  • How Do You Mount The TorkLift GlowStep Stow N' Go Scissor Steps
    Nice question, lets find out below: First we need to make sure that you have the right fit. Measure from the ground up to the door frame and then measure the width. **TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 375 lbs - Black Bracket # TLA7833. This unit listed above fits entry heights 23-1/2 to 34-1/4 inches tall. The mounting bracket needs an area right under the entry door that is 21-1/2" wide x 12-1/2" tall x 8-1/2. Here is a list of the basic mounting...
    view full answer...
  • Does The TorkLift GlowStep With Landing Gear Come As A Set Or Seperated
    The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 375 lbs - Black Bracket # TLA7833 is sold as a complete unit and comes to us from the manufacturer as a complete set.
    view full answer...
  • Will TorkLift GlowStep Stow N' Go Scissor Steps Fit 2015 Lance 1172
    Based on what we have found for other years of the Lance 1172 it seems likely the # TLA7833 will fit. However, the only way to be sure is to go ahead and measure. For the mounting bracket you will need an area that is at least 23" wide and 3-1/2" tall. You will also need to measure your entry height, which is the distance from the mounting point to the ground. Assuming you have an entry height of 23-1/2" - 34-1/2" these steps will work for you. If it is 31" - 42" you need the # TLA7834...
    view full answer...
  • Max Entry Height that Torklift GlowStep Can Be Used with for 3 and 4 Step Versions
    For the 3 step Torklift GlowStep with Landing Gear part # TLA7833 the max entry height is 34-1/2 inches and then for the 4 step version # TLA7834 the max height is 42 inches.
    view full answer...
  • Can Step Be Added to TorkLift GlowStep Stow N' Go Scissor Steps
    Yes, you can add a single step to the TorkLift GlowStep Stow N' Go Scissor Steps # TLA7833 you referenced with the part # TLA7801. This will bolt right onto the existing steps with the included hardware and it features the same glow tape as the original assembly to provide a lighted surface. Pricing information will be listed on the product page.
    view full answer...
  • Could GlowStep Stow N' Go steps # TLA7833 Fit 2017 Keystone Mini with 25 inch Door Width
    The GlowStep Stow N' Go steps # TLA7833 have a bolt-on mounting base that installs on the outside of your camper. The base provides a strong and stable connection to your camper, and it attaches permanently using the included mounting hardware. This could easily be used with a step width that is 25 inches. From the ground to the mounting bracket on this will measures 27-7/8 inches when these are pulled out as well. If you have a different height let me know and I'll see what we can find...
    view full answer...
    Image 1 for
  • Adjustability of TorkLift GlowStep Revolution Scissor Steps
    The TorkLift # TLA7833 3-step unit would indeed need to be fully extended to work properly. The legs adjust to makes the steps compatible with entry heights ranging from 23-1/2" - 34-1/2". To find the needed entry height, measure the distance from the door's threshold to the ground. The 4 step unit, part # TLA8004 is for entry heights between 32-1/2" - 44". The steps are illuminated by glow tape which glows in the dark for up to 10 hours with only 5 minutes of light exposure, and doesn't...
    view full answer...
  • 2-Step or 3-Step TorkLift GlowSteps for a 2019 Lance 2375 Travel Trailer
    You are correct that you have a 2019 Lance 2375 travel trailer, the RV industry begins to make the next model year on March 1st. In looking at your Lance the new models come with a 2-Step TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8102. My recommendation is to level your Lance and measure the height to the floor inside your door. This step is designed for a height of 18-1/2" to 28". The 3-Step # TLA8103 is designed for a 25-1/2" to 36" height. Since there is some...
    view full answer...
  • Dimensions of 3 Step TorkLift Stow N' Go Scissor Steps
    The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 375 lbs - Black Bracket # TLA7833 has a weight capacity of 375 lbs. The mounting bracket is 21.5 inches wide by 12.5 inches tall and 8.5 inches deep. It is designed for entry heights of 23.5 inches to 34.5 inches. From the edge of the mount to the farthest point, the steps will extend 42 inches according to my contact at TorkLift.
    view full answer...
    Image 1 for
  • Gap Between First/Last Step and Mounting Plate on TorkLift GlowStep Stow N' Go Scissor Steps
    In regards to the TorkLift GlowStep Stow N' Go Scissor Steps part # TLA7833, there is indeed a 6-1/2" gap between the first/last step and the mounting plate. This is needed in order for the steps to fully retract. It is not the intention of TorkLift to trip little kids but the design is necessary for the steps to retract properly. If this were not there then the steps would stick out much further while retracted and I'm sure someone would not like either. If you take a look at a similar...
    view full answer...
    Image 1 for
  • Are There Any Folding RV Steps That Have A 6" Rise
    The closest folding step option we carry to a 6" rise is the Lippert Manual Pull-Out Step for RVs # LC432687. These steps have a 7" rise and mount underneath the door threshold. For these to work you would need an entry height of 24-1/2" - 27-1/2" and a mounting bracket width approximately 27-1/2" wide. The fold down steps that MORrdye and Lippert make all have an 8" rise so they would be above what you're looking for but these do have handrail options to help make climbing up and down...
    view full answer...
  • How to Choose Correct GlowStep System for Varying Ground Height Situations
    There is some adjustability for the steps. For example, the 3-step TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7833 you're looking at is designed for an entry height of 23-1/2" - 34-1/2" but for a 4-Step Version, part # TLA7834, it works with an entry height of 31" - 42". These steps are essentially the same aside from the height they are meant to fit with. What I recommend doing is try determining what height ranges best suits your needs and go from there. If the height...
    view full answer...
  • Recommended Steps for Uneven Ground that Adjust to the Terrain for Level Treads
    The Econo Porch Trailer Step with Handrail and Landing - Triple - 7" Drop/Rise, 27-1/2" Tall # EHS-103-R are not going to work well on uneven ground. They are designed to be used on level or close to level applications. For a step that will allow that uneven ground application while still giving you level steps, I recommend the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 350 lbs - Black Bracket # TLA7833. This will also give you the glowing assistance for...
    view full answer...
  • Difference Between No Ground Contact vs. Ground Contact for RV Steps
    The only difference in steps that are faceted as having Ground Contact or No Ground Contact is that the steps that have ground contact have a portion of the steps that comes in complete contact with the ground while those labeled No Ground Contact are not supported by the ground at all. For example, the TorkLift GlowStep Stow N' Go Scissor Steps with Landing Gear # TLA7833 have landing gear feet that support the steps via full ground contact while the Flexco Manual Pull-Out Steps for...
    view full answer...
  • Recommended Camper Step for 20 Inch Door and 24 Inch Threshold
    The SolidStep Manual Fold-Down Steps for 24" Wide RV Door Frames - Double - Aluminum # LC713662 is the closest option to the MorRyde you referenced. This fits the threshold height but does not fit you door frame width. The Brophy Camper Scissor Steps - 3 Steps - Steel - Diamond Tread # SS03 will work well for you and will be removable and able to be stored inside if desired. The bracket will be on the outside but will give you a great option. If you want a more stable option than that...
    view full answer...
  • Recommended Low Rise Step for 2005 Forest River Rockwood 28 Foot Trailer
    The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 375 lbs - Black Bracket # TLA7833 is the closest option we have to what you are seeking. The steps have a 7-1/2 inch rise with steps that are 20 inches by 8 inches. The overall width is 21-1/2" wide x 12-1/2" tall x 8-1/2" deep. It has leveling feet to help with uneven ground. If you need a smaller width, the only option we have is the Brophy Scissor Step # SS03 in black or # AS03 in aluminum. These are 17 inch...
    view full answer...
  • Are There Fold-Down RV Steps Compatible With A 19-1/4 Wide Entry Threshold
    The smallest threshold size for fold-down steps is with MORryde's # MR86RR at 21-3/4" so there wouldn't be a fold-down option small enough to fit your Palomino's threshold. You would have to stick with a set of scissor steps like the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7833 which would just bolt to the wall under the door threshold and would be able to fit your 31" entry height. They also come with adjustable landing gear feet to provide more stability when walking...
    view full answer...
  • Truck-Bed Camper Troubleshooting For Tie-Down / Step Space Issue
    The TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear Item # TLR3510 is competing for the same space as the step so unfortunately there isn't a work around for this tie down. Instead you could replace the steps that bolt onto the wall of the camper like the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 375lbs - Black Bracket Item # TLA7833. There are a few different options depending on the entry height of your camper which you can see in the chart I've attached....
    view full answer...
    Image 1 for

Do you have a question about this RV and Camper Step?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Kathleen M
Updated by:
Kathleen M
Employee Halie H
Updated by:
Halie H
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M
Employee Amanda M
Written by:
Amanda M
Employee Andy C
Installed by:
Andy C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.