TorkLift RV and Camper Steps
- TLA7834
- 4 Steps
- Snap-On Step
- Truck Camper
- 20 Inch Wide Step
- TorkLift
- 21-1/2 Inch Wide
- Aluminum
- 7-1/2 Inch Drop/Rise
- Ground Contact
8" x 20" Aluminum steps are designed for truck bed campers. Steps mount on camper and don't need to be removed for travel. Easy deployment with retention strap. Landing gear legs offer maximum stability and let you fine-tune the height.
Features:
- Pull-out steps make it easy to get into or out of your truck camper
- Scissor design lets you manually collapse steps and fold them up for travel
- Lockable storage bracket keeps folded steps in place during travel - no need to remove steps and store inside camper
- Landing gear creates a stable connection from the bottom step to the ground
- Adjustable legs help to stabilize stairs on uneven terrain
- Large rectangular footplates provide level support and help prevent sinking into ground
- No assembly required - landing gear comes pre-installed on the bottom step
- Retention strap keeps your steps stowed when not in use
- When you need your steps, unhook the strap to release them
- Glow tape creates lighted step surface for safely climbing into and out of your camper at night
- Adheres to sides of step platforms
- Glows in the dark for up to 10 hours with only 5 minutes of light exposure
- Black powder coated steel mounting bracket is corrosion resistant
- Aircraft-grade aluminum steps are durable and rustproof
- Built-in SureGrip tread on step surface provides excellent footing
- Stainless steel hinges are bolted together for easy add on, removal, or replacement of individual steps
- Bushing bearings offer smooth action and are longer-lasting that standard riveted connections
- Made in the USA
Specs:
- Entry height: 31" - 42"
- Step dimensions: 20" wide x 8" deep
- Mounting bracket dimensions: 21-1/2" wide x 14-1/2" tall x 8-1/2" deep
- Drop/Rise: 7-1/2"
- Weight capacity: 375 lbs
- Lifetime limited warranty
TorkLift's GlowStep Stow N' Go steps offer stability and adjustability. The built-in landing gear legs let you fine-tune the height of the steps. And they can be adjusted independently of one another to stabilize the steps on uneven terrain, eliminating any wobble.
These GlowStep Stow N' Go steps have a bolt-on mounting base that installs on the outside of your camper. The base provides a strong and stable connection to your camper, and it attaches permanently using the included mounting hardware. When you're ready to roll, just collapse the steps, fold them up, and snap them into the base of the bracket. The stabilizing bracket not only holds the steps in place on the outside of your camper, but it also prevents unwanted movement and rattle. For ultimate security, add on a TorkLift pin lock (TLA7509 - sold separately) to lock the steps to the bracket.
Will Torklift GlowStep Stow N' Go Scissor Steps Work for You?
Scissor steps are typically installed on truck campers. The Stow N' Go scissor steps from Torklift are easy to install and lock into the mounting bracket while on the go. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
![StowNGo Mounting]()
The Stow N' Go scissor steps have a single mounting bracket that attaches to either the camper wall or the truck bumper beneath the doorway. To decide which size you'll need, locate the space available for the mounting bracket on your application and measure the width and height. You will need an area of at least 23" wide and 3-1/2" tall.
Once you have an approximation of where the mounting bracket will go, the spot you chose will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
![StowNGo Entry Height]()
To decide on how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, and it will tell you how many steps you need.
The chart below displays entry height measurements in the first column. The step part numbers with the 21-1/2" mounting bracket width are in the second column.
This page's step assembly is in bold text.
| Entry Height | 21-1/2" Mounting Bracket Width |
|---|
| 23-1/2" - 34-1/2" | TLA7843, TLA7833 |
| 31" - 42" | TLA7844, TLA7834 |
| 38-1/2" - 50" | TLA7845, TLA7835 |
| 46-1/2" - 58" | TLA7836, TLA7846 |
How Do You Install the Steps?
To install the steps:
- Find the mounting spot for the bracket on your vehicle
- Unfold the steps and attach to the mounting bracket
- Place the step assembly against the camper or bumper
-Make sure the assembly is centered beneath the doorway
- Mark the mounting holes on the camper and drill
- Remove the steps from the bracket and set aside
- Attach the mounting bracket to the camper
-Secure in place with included lag screws
- Attach the stairs to the mounting bracket and extend
GlowStep Accessories
![Torklift Accessories]()
Add any of these accessories to your Stow N' Go steps for stability, eliminating gaps, and keeps your steps and RV interior clean. The GlowGuide handrail (TLA7621 - sold separately) attaches to the outside of your RV and a bracket on the bottom of the steps. This helps to steady the assembly and adds 25 lbs to the weight capacity of the stairs. The SafeStep vinyl barrier (TLA7602 - sold separately) easily fastens with Velcro strips in between any 2 steps. This prevents your or your pets from accidentally slipping between steps. The DirtDestroyer boot brush (Tla7603 - sold separately) affixes to the bottom of the steps so you can scrape your shoes before climbing into your RV.
A7834 Tork Lift Glow Step Stow and Go Scissor Steps for Truck Bed Campers - 4 Stairs w/ Landing Gear
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.