bing tracking image
  1. Roof Basket
  2. Inno
  3. Small Capacity
  4. Aero Bars
  5. Aluminum
  6. Short Length
Inno Shaper 80 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 32-1/2"
Inno

Inno Shaper 80 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 32-1/2"

Part Number: INXA568
In Stock
$242.99
Retail:$269.99
You Save: $27.00
Roof Basket
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Lightweight aluminum basket lets you transport gear on your vehicle's roof. Easy to load with tapered side walls and flat cargo area. Low-profile design reduces drag and wind noise. Mounts in crossbar top channels with included hardware. Great Prices for the best roof basket from Inno. Inno Shaper 80 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 32-1/2" part number INXA568 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (11)
  • Q & A (0)
  • Photos

Inno Roof Basket - INXA568

  • Small Capacity
  • Aero Bars
  • Inno
  • Aluminum
  • Short Length
  • Cargo Basket
  • Black

Lightweight aluminum basket lets you transport gear on your vehicle's roof. Easy to load with tapered side walls and flat cargo area. Low-profile design reduces drag and wind noise. Mounts in crossbar top channels with included hardware.


Features:

  • Cargo basket lets you transport gear on the roof of your vehicle
    • Keeps wet, soiled, or oversize gear out of your vehicle's interior
    • Maximizes your vehicle's cargo-carrying capacity
  • Aerodynamic, low-profile design helps reduce drag and wind noise
  • Tapered side walls and flat cargo area make it easy to load and unload gear
  • T-slot mounting hardware installs directly into the top channels of your crossbars
  • Rustproof and lightweight anodized aluminum construction
  • Black powder coat finish resists corrosion


Specs:

  • Application: most aero and elliptical crossbars with top channels
    • Minimum crossbar spread: 20"
  • Weight capacity: 110 lbs
  • Dimensions:
    • Exterior: 46-5/8" long x 32-1/2" wide x 3" tall
    • Interior: 41-3/8" long x 30" wide x 2-1/8" tall
  • Carrier weight: 15 lbs
  • Limited lifetime warranty


Inno Shaper 80 t-slot dimensions

Note: Check the diagram above to ensure that your crossbar top channels are compatible with the Shaper 80 mounting hardware.


Inno Shaper 80 cargo box on car

The Shaper 80 cargo basket is a lightweight option for transporting gear on your roof. It maximizes your cargo-carrying capacity, and it keeps damp or dirty gear out of your vehicle's interior. The aerodynamic shape helps to reduce drag and wind noise, and the low-profile design and flat cargo area make it easy to load gear. The basket installs in the T-slots of your aero-style crossbars to create a sleek look. And it's constructed of aluminum with a black powder coat finish so it won't rust if you leave it on your roof.


Aerodynamic Shape

Inno Shaper 80 cargo box

The Shaper 80 front panel works like a fairing to direct air up and over the basket. This reduces drag and wind noise as you drive. And the basket sits flush with the top of your crossbars to create a low profile.


Easy-to-Load Design

Inno Shaper 80 cargo box tied down

The basket has tapered side walls that allow you to easily load your gear. The floor is made of flat panels that make it easy to shift and properly position cargo.


You can secure your gear to the basket with straps, rope, or a cargo net (sold separately). If using a cargo net, attach the net hooks to the bottoms of the side walls or the front and rear panels. Straps or ropes should be routed under the basket and around your cargo to secure it in place.


Simple Installation

Inno Shaper 80 cargo box install

The Shaper 80 mounts easily to the channels - or T-slots - in the tops of your crossbars. To install the basket, remove your crossbar endcaps and slide the included square-head bolts into the top channels. Adjust the bolts along the channels until they line up with the mounting brackets on the bottom of the basket, then simply secure the brackets to the bolts.


Rubber pads are included to cushion the bottom of the basket where it rests on your crossbars. This will protect the crossbars from scratches and help to reduce road noise.



INT578 Inno Shaper 80 Roof-Mounted Cargo Carrier - 110 lbs

Replaces INXA568

Installation Details INXA568 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Inno Shaper 80 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 32-1/2" - INXA568

Average Customer Rating:  4.8 out of 5 stars   (11 Customer Reviews)

Lightweight aluminum basket lets you transport gear on your vehicle's roof. Easy to load with tapered side walls and flat cargo area. Low-profile design reduces drag and wind noise. Mounts in crossbar top channels with included hardware.

by:

We went with this style of basket as it seems less obtrusive when not being used. We will leave on if we have upcoming use and take off for long periods of inactivity. It is easy to install and easy to load, unlike some bags we looked into. Netting a basket this size has been a concern as there are not many choices and while etrailer customer service is excellent, inno is not. For non-pro campers like us, this has been a solid choice.



by:

I was looking for a roof basket that was low profile, sturdy, and aerodynamic. This fit everything I needed. It did great on our 6 hour trip with a cargo bag in it. The installation was easy and straightforward as well. The team at etrailer helped me find a good cargo net to fit around this platform basket which gave me confidence in carrying things up there. Overall I’m happy with this roof basket.



by:

Perfect fit! Great quality! Super cool look on my 2012 R56 Mini



by:

Awesome product but even better service! I ordered the wrong size and had to return and order the correct item. etrailer made it super easy and they followed up on every step of the return and new order. They were able to ship the new item in time for my trip! I highly recommend etrailer and I will definitely use them again!'



by:

Just finished mounting the basket to a set of the crossbars made by the same company. Fit and finish are great. My wife likes how it looks on her 2018 Jeep Cherokee Trail Hawk. Haven’t used it yet for luggage so 4 stars as I can’t comment on function. This fits much better than the 4 slat basket. E-trailer customer support was very helpful after I discovered the 4 slat version of this was too wide for the Cherokee.



by:

Easy to assemble



by:

Excellent fitment!
Thank you etraile
r!!!



by:



by:



by:



by:


11
11

See what our Experts say about this Inno Roof Basket

  • Will The Inno Shaper 80 Fit The Rhino Rack Vortex Aero C-Channel On My 2012 Audi A3 Hatchback?
    The Rhino Rack Vortex Aero Bars # RRVA126B-2 on your 2012 Audi A3 Hatchback has a c-channel dimensions have a neck width of 7/16" and bottom width of 7/8" and the Inno Shaper 80 # INXA568 calls for that size c-channel for the hardware to fit. So, yes the Inno Shaper 80 will fit your Rhino Rack Aero Bar Setup! As far as the roof top bag goes, any bag is going to affect your fuel economy, but by picking the right bag we can help limit the amount of wind resistance you'll get while driving....
    view full answer...
    Image 1 for
  • Recommended Cargo Net and Straps for Inno Shaper 80 Roof Cargo Basket
    I recommend using the RhinoRack # RLN1 which is 47-1/2" long x 31-1/2" wide unstretched, so it's going to be the closest match for your Inno Shaper 80 # INXA568 and will allow you to secure your cargo into the basket. For straps, I recommend using the etrailer Cam Buckle Cinch Straps w/ Buckle Protectors # E98876-4 which come in packs of 4 and are 13 feet long so they'll allow you to wrap them all the way around most loads you're going to carry in the basket. I've linked some reviews of...
    view full answer...
  • Cargo Net Recommendation for Inno Shaper 80 Cargo Basket
    The Inno Shaper80 cargo basket part # INXA568 measures 46-1/2" x 32-1/2" so for a cargo net I would go with the Yakima Stretch Net part # Y07072 which measures 38 by 32 inches. This is a high quality stretchable cargo net that would do a great job securing cargo to the Inno cargo basket. I attached a review video for more info as well.
    view full answer...
  • Can Inno Shaper 80 or 100 Roof Basket Attach to Thule Aeroblade/Wingbar Crossbars
    Yes, we do have versions of the Inno Shaper 80 and 100 that will fit into the top channels of your Thule Wingbar/Aeroblade crossbars. For the 100 you'd want the # INXA569 and for the 80 you'd want the # INXA568 and you'd be set!
    view full answer...
  • Recommended Roof Rack and Aluminum Cargo Basket for 2013 Kia Rio 5 Door
    For your 2013 Kia Rio 5 door, to add a roof basket you will first need to add a roof rack. I recommend the Inno Aero Roof Rack # INXB100-108, # INXS200, and # INK608 which is a custom fit for your vehicle to mount to a naked roof (no side rails). The rails will be 27-1/2 inches on center. I've attached the installation details to assist. Then for an aluminum roof basket, we have the following options: Aluminum Roof Mounted Cargo Basket - 44" Long x 39" Wide x 7" Deep # 288-09200 Thule...
    view full answer...
  • Roof Cargo Basket Recommendation for 2018 Subaru Crosstrek
    The Inno Shaper cargo baskets can either attach to the top channel of a crossbar or by clamping around a square bar. We have great cargo baskets that do fit the bars of your 2018 Subaru Crosstrek but none from Inno. Instead I would recommend the Yakima OffGrid roof basket part # Y07138 which is a confirmed fit will work great. The dimensions are pretty similar at 44 inch by 40 inch, it has a fairing to keep down wind noise, and has crossbars built into it for if you ever wanted to attach...
    view full answer...
  • Will the Inno Shaper 80 Roof Cargo Basket Work With Rhino-Rack Vortex Aero Crossbars
    Yes, the Inno Shaper 80 Roof Cargo Basket part # INXA568 will work with the Rhino-Rack Vortex Aero Crossbars like part # RRVA180B-2. The t-bolts that come with the Inno Shaper will fit perfectly into the channels on the Rhino-Rack Vortex Aero. In regards to crossbar spread, the 36" you have now will be fine as the only requirement is more than 20". If you want to adjust this however you can but just be sure not to go less than 20" apart front to back on center.
    view full answer...
  • Can Thule Interstate Rooftop Cargo Bag be Used on Panoramic Sun Roof
    Even with the Malone AirFlow2 Roof Rack # MPG215 on your 2019 Jeep Cherokee you do need to use a basket like the Inno Shaper # INXA568 with the Thule Interstate Rooftop Cargo Bag # TH869 because otherwise part of the bag would rest on the panoramic sunroof and that would be dangerous.
    view full answer...
  • Can the Rhino-Rack XTray Pro Cargo Basket Be Mounted Using Channels
    The Rhino-Rack XTray Pro Cargo Basket part # RRRMCB03 will work just fine with a set of crossbars like the Rhino-Rack Vortex Aero Crossbars. That said, I can only recommend using the universal wrap around mounts that come with the basket. It does not come with any sort of track mounting hardware so I cannot recommend this. The Rhino-Rack Universal Pioneer Platform Rack part # RR42115BF and Inno Shaper 80 Roof Cargo Basket part # INXA568 however do both come with channel mounts.
    view full answer...
  • Accessory Compatibility with Various Brands of Roof Racks That Have T-Slots
    In our experience the various manufacturers of roof racks and rack-mount accessory carriers have designed their respective products to work well together. The T-Slots in the bars of the Rola 59823 will work just fine with Thule, Inno, Lockrack and other brands of carriers so long as they are made to fit the T-slots (or "channels") in the tops of such roof rack bars. We have T-slot kayak carriers like the Lockrack # LR54FR, bike carriers like the Inno # INXA391 and even cargo carriers like...
    view full answer...
  • How to Remove Brand Stickers from a Cargo Basket
    The "Inno" logo that is placed on the front and rear of the Inno Shaper 80 Roof Cargo Basket part # INXA568 are stickers that are applied at the factory before they ship to our warehouse. I do have a simple way for you to remove them but we cannot exactly requestly to not have them put on. In order to remove the above stickers all you will need is a heat gun or blow dryer and bit of adhesive remover such as Goo Gone. To remove the stickers you will first want to heat them up with the heat...
    view full answer...
  • Is Inno Shaper 80 Roof Cargo Basket Compatible with Rola Roof Rack on 2012 Kia Soul
    The T-Slot hardware from the Inno Shaper 80 Roof Cargo Basket # INXA568 is compatible with the T-Slots on your Rola Sport Series Roof Rack with GTX Mounting for your 2012 Kia Soul so you are good to go! Just keep in mind that Rola has discontinued this specific roof rack, so if you ever lose or damage a part of the Rola roof rack, or simply find yourself in need of a new roof rack for your 2012 Kia Soul, I highly recommend the Rhino-Rack roof rack, part # RRVA126B-2 (Vortex Aero Crossbars),...
    view full answer...
  • Roof Cargo Basket Recommendation for a 2009 Nissan Murano
    The Inno Shaper80 Rooftop Cargo Basket # INXA568 is designed to fit crossbars that have T-slots built into the tops of them. For a similar roof basket that will fit your 2009 Nissan Murano you would want the Thule Canyon XT # TH859XT.
    view full answer...
  • What Size Hardware Does the INNO Shaper 80 Use
    The bolt on the Inno Shaper 80 part # INXA568 are M8. While I do not have a locking knobs for that size you can use M8 nuts and lock washers or M8 nylon lock nuts for security if you choose to.
    view full answer...
  • Roof Rack And Cargo Basket Compatible With 2016 Jeep Grand Cherokee
    The Rhino-Rack RVP Roof Rack # RRRVP27 are compatible with your 2016 Jeep Grand Cherokee ONLY if you have the chrome on your top rails. This represents the E-group package on your vehicle. If you have the all black rails of the non e-group package, you will need a different roof rack. If that is the case, I recommend the Thule roof rack that includes: Thule WingBar Load Bars - Aluminum - Black - 60" - Qty 2 # TH711520 Thule Rapid Traverse Roof-Rack Foot Pack # TH480R Thule Roof Rack...
    view full answer...
  • Fit of Inno Shaper80 Rooftop Cargo Basket INXA568 on Rhino-Rack ROC25 Roof Rack
    The Rhino-Rack ROC25 aero roof rack that fit your 2016 Mazda CX-3, part # RR46XR, uses elliptical crossbars whose dimensions are 3-1/8-inches wide x 1-3/16-inches tall. The Inno Shaper80 Rooftop Cargo Basket # INXA568 is compatible with the T-slot channels in the Rhino-Rack crossbars. Just take a quick measurement of the spacing of your bars, from the center points of both the front and rear bars, to confirm they are at least 20-inches apart as required by the Inno basket.
    view full answer...
  • Roof Basket that Can Mount in Side Rail Channels on a Leer Camper Shell
    There are some baskets that mount using just a T-slot in rails. If the top opening of the slot is 13/32" to 7/16", the bottom of the slot 7/8" wide, with a depth of about 7/32" then you may be able to use an Inno Shaper such as # INXA568 or # INXA569. But there isn't a way to mount the Rhino-Rack basket # RMCB02 to the channels in side rails.
    view full answer...
  • Will the Inno Shaper 80 work on the Yakima Rail BArs for my 2018 Subaru Crosstrek
    Luckily the Yakima RailBar Crossbars part # Y00448-0449 has the appropriate tracks on the top of the rails and is just wide enough to accommodate the attachment points of the Inno Shaper 80 Roof Cargo Basket part # INXA568. The edges of it are going to be about even with the outside of your crossbars and will look really nice.
    view full answer...
  • Rooftop Cargo Basket Compatible with Factory Crossbars on 2015 Subaru XV Crosstrek
    Inno's Shaper 80 Roof Cargo Basket # INXA568 is an aluminum channel-mount type that will only fit on roof rack bars that have a top channel designed to accept such accessories. Some aftermarket roof racks like the Rhino-Rack Vortex (parts # RRVA118B-2 and # RRSX100) have such a channel in their crossbars but based on my research your Crosstrek factory bars do not have this feature. Although we don't have an Inno basket to fit your factory bars we do have other brands of rooftop carrier...
    view full answer...
  • Will the Inno Shaper 80 Roof Cargo Basket Work with Billie Bars on a Truck
    I am not super familiar with the Billie Bars, but from what I could find on them, they appear to work with channel mounted accessories. Because of this, I do not see a reason why the Inno Shaper 80 Roof Cargo Basket # INXA568 would not work with the Billie Bars on your truck with the included channel mount hardware.
    view full answer...
  • Roof Rack and Basket for 2018 Toyota Prius with Naked Roof
    Hey Leigh, so the best and most economical roof rack option for your 2018 Toyota Prius would be the Inno Square Bar Rack part # IN65SR that you referenced so this would be where you would want to start. Then for a roof basket the Inno Shaper 80 part # INXA568 would be a great option that measures 46-1/2 inch by 32-1/2 inch.
    view full answer...
  • Roof Basket that Can Attach to Crossbar T-Slot and is Less than 40 inches Wide
    Hey William, for what you are looking for the best option would be the Inno roof basket part # INXA568 which is 32-1/2 inches wide and 46-5/8 inches in length. It also can attach to the T-slot of a crossbar as well.
    view full answer...

Do you have a question about this Roof Basket?


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Dustin K
Video Edited:
Dustin K
Employee Tyler C
Edited by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lisa S
Written by:
Lisa S
Employee Hayden R
Installed by:
Hayden R
Employee Wilson B
Updated by:
Wilson B
Employee Ronnie R
Updated by:
Ronnie R
Employee Noah M
Updated by:
Noah M
Employee Savanna B
Test Fit:
Savanna B
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.