Inno Shaper 100 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 41-7/8" - 110 lbs
(13 reviews)
Price: $252.67
Inno Shaper 100 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 41-7/8" - 110 lbs
Item # INXA569
Retail:$319.99
Our Price: $252.67
You Save: $67.32
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (13)
- Q & A (0)
- Photos
Inno Roof Basket - INXA569
- Small Capacity
- Aero Bars
- Elliptical Bars
- Inno
- Aluminum
- Cargo Basket
- Short Length
- Black
Lightweight aluminum basket lets you transport gear on your vehicle's roof. Easy to load with tapered side walls and flat cargo area. Low-profile design reduces drag and wind noise. Mounts in crossbar top channels with included hardware.
Features:
- Cargo basket lets you transport gear on the roof of your vehicle
- Keeps wet, soiled, or oversize gear out of your vehicle's interior
- Maximizes your vehicle's cargo-carrying capacity
- Aerodynamic, low-profile design helps reduce drag and wind noise
- Tapered side walls and flat cargo area make it easy to load and unload gear
- T-slot mounting hardware installs directly into the top channels of your crossbars
- Rustproof and lightweight anodized aluminum construction
- Black powder coat finish resists corrosion
Specs:
- Application: most aero and elliptical crossbars with top channels
- Minimum crossbar spread: 20"
- Weight capacity: 110 lbs
- Dimensions:
- Exterior: 46-5/8" long x 41-7/8" wide x 3" tall
- Interior: 41-3/8" long x 39-3/8" wide x 2-1/8" tall
- Carrier weight: 17.4 lbs
- Limited lifetime warranty
Note: Check the diagram above to ensure that your crossbar top channels are compatible with the Shaper 100 mounting hardware.
The Shaper 100 cargo basket is a lightweight option for transporting gear on your roof. It maximizes your cargo-carrying capacity, and it keeps damp or dirty gear out of your vehicle's interior. The aerodynamic shape helps to reduce drag and wind noise, and the low-profile design and flat cargo area make it easy to load gear. The basket installs in the T-slots of your aero-style crossbars to create a sleek look. And it's constructed of aluminum with a black powder coat finish so it won't rust if you leave it on your roof.
Aerodynamic Shape
The Shaper 100 front panel works like a fairing to direct air up and over the basket. This reduces drag and wind noise as you drive. And the basket sits flush with the top of your crossbars to create a low profile.
Easy-to-Load Design
The basket has tapered side walls that allow you to easily load your gear. The floor is made of flat panels that make it easy to shift and properly position cargo.
You can secure your gear to the basket with straps, rope, or a cargo net (sold separately). If using a cargo net, attach the net hooks to the bottoms of the side walls or the front and rear panels. Straps or ropes should be routed under the basket and around your cargo to secure it in place.
Simple Installation
The Shaper 100 mounts easily to the channels - or T-slots - in the tops of your crossbars. To install the basket, remove your crossbar endcaps and slide the included square-head bolts into the top channels. Adjust the bolts along the channels until they line up with the mounting brackets on the bottom of the basket, then simply secure the brackets to the bolts.
Rubber pads are included to cushion the bottom of the basket where it rests on your crossbars. This will protect the crossbars from scratches and help to reduce road noise.
INT579 Inno Shaper 100 Roof-Mounted Cargo Carrier - 110 lbs
Replaces XA569
Installation Details
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Inno Shaper 100 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 41-7/8" - 110 lbs - INXA569
Average Customer Rating: 4.4 out of 5 stars (13 Customer Reviews)
Lightweight aluminum basket lets you transport gear on your vehicle's roof. Easy to load with tapered side walls and flat cargo area. Low-profile design reduces drag and wind noise. Mounts in crossbar top channels with included hardware.by: Chris from the couv09/20/2023
The rack was fairly easy to put together. Just use hand tools and take your time. The instructions said to lay out the floor slats inside the frame before installing, make sure you do that because do to the shape you cannot put them in after the frame is put together (I learned the hard way). Also this basket was for my Tesla Model 3 and the T-Slot bolts are too short to work without bending down the brackets. I have a support ticket with Inno to see if they have longer T-Slot bolts ( guessing they need to be around 1 3/8” to 1 1/2” long. The ones it comes with are only 3/4” which is fine if you have a flat T-slot equipped roof rack but the Tesla roof rack is curved so the attachment bolts need to be longer. Also I had to use the included plastic spacer and one I made from some left over laminate floor to wall spacers and 7 stainless steel washers to fill the gap the curved rack makes between it and the basket. See pictures. It does work and does not look too bad.
by: Jacques 12/13/2022
Well designed , low profile and light .Had to make a very minor adjustment to the rear T-slot hardware part to make it fit on my Prius standard roof bars . Other than that …. Very happy !!!
by: Bryan09/03/2022
Very disappointed in this rack. Bought an inno rack thinking it would be higher quality than a Chinese rack off [other retialer], but wish I saved the $XX and just went with something else. The screws for the slats fit into a slot on the bottom of the slats. The frame isn't threaded which leaves the screws crooked and mildly stripped because you're creating your own threads in the aluminum frame. The slot also isn't threaded, leaving the slats to rattle around. There is also no channel on top of the slats for t-bolts, and the instructions say not to put a hook on the frame which significantly reduces usable area if you need to secure to the slats. I'd rather have bought a $XXX rack, gone to Home Depot for some upgraded hardware, and replaced every year or two rather than spend the $XXX on this rack. ETrailer return policy is unused/uninstalled, which really only leaves you the opportunity to return if you've simply had a change of heart rather than disappointed in a poor product. Would strongly recommend to purchase something else off [other retailer].
by: Paul11/09/2021
Light, strong, easy to put together and install.
Only complaint is self tapping screws holding the 4 flat panels in place do not sit flush and hold tight. Instructions warn not to over tighten as I am sure this has been a problem others had.
Panels tend to rattle with no load on them.
by: Ricardo 05/07/2023
Great product so far expedited shipping overall very well please product looks sturdy and well built
by: Hamd11/24/2019
Put this on my wife’s 18 Cherokee trail hawk. Needed a bit more room for luggage. There has been a bit more wind noise with this rack. It is pretty light which makes it easy to remove. It has a decent payload and my wife likes the look. Happy wife, happy life...
by: Corey 11/24/2022
Great job!
by: Mark 09/20/2021
Low profile-Sturdy
by: Thang12/08/2020
by: John 11/10/2022
by: Russ 08/06/2022
by: Mark 09/02/2021
Sturdy and easy to put together!
13
13
See what our Experts say about this Inno Roof Basket
- Is The Inno Shaper Platform Compatible With A Thule Wingbar Roof Rack With A 30" SpreadYes, the Inno shaper 100 # INXA569 will indeed fit the Thule Wingbars on your 2020 Honda HRV. The platform will work with a crossbar spread of 20" to about 40". I can also confirm that the mounting hardware will be compatible with the channels on the Thule Wingbar.
view full answer... - Can Inno Shaper 80 or 100 Roof Basket Attach to Thule Aeroblade/Wingbar CrossbarsYes, we do have versions of the Inno Shaper 80 and 100 that will fit into the top channels of your Thule Wingbar/Aeroblade crossbars. For the 100 you'd want the # INXA569 and for the 80 you'd want the # INXA568 and you'd be set!
view full answer... - Can Channel Mount Hardware be Installed on Silver Inno Shaper 100 Cargo BasketThe Inno Shaper 100 Roof Cargo Basket - Channel Mount # INXA569 is what you'll need to use if you want to install the cargo basket via the T-Slots on your crossbars. The Inno Shaper 100 Roof Cargo Basket - Square Bars # IN569 you're interested in has a different mounting hole configuration so the hardware used in the channel mount setup is, unfortunately, different. I confirmed this with my contact at Inno.
view full answer... - Will the Inno Shaper 80 Fit My Factory Crossbars on My 2021 Toyota Carolla?From the photo that you provided as well as some additional research, the factory crossbars do have top channels. The discontinued Inno Shaper 80 Roof Cargo Basket is compatible with most aero and elliptical crossbars with those top channels. If you want to know for sure, I recommend measuring the dimensions on the channels to make sure they match the compatibility of the Shaper 80. I went ahead and attached an image that shows the dimensions you need.
view full answer...
- Will Inno Shaper 100 Cargo Basket Fit Factory Roof Rack on 2015 Lexus RX 350If the factory roof rack on your 2015 Lexus RX 350 has the T-Slot channels then yes, the Inno Shaper 100 Roof Cargo Basket # INXA569 will fit directly onto your roof rack system. If you don't have the T-Slot channels then I recommend checking out the Rhino-Rack Roof Mounted Steel Cargo Basket # RMCB instead because it is about the same size and it uses U-Bolts that wrap around the crossbars instead of using the T-Slot for mounting. Attached are some review videos for you to check out.
view full answer... - Does Inno Shaper 100 Roof Cargo Basket Fit OEM Crossbars of 2003 Honda CR-VYes, the Inno Shaper 100 Roof Cargo Basket # INXA569 that you referenced does fit your 2003 Honda CR-V that has factory crossbars.
view full answer... - Roof Basket that Can Mount in Side Rail Channels on a Leer Camper ShellThere are some baskets that mount using just a T-slot in rails. If the top opening of the slot is 13/32" to 7/16", the bottom of the slot 7/8" wide, with a depth of about 7/32" then you may be able to use an Inno Shaper such as # INXA568 or # INXA569. But there isn't a way to mount the Rhino-Rack basket # RMCB02 to the channels in side rails.
view full answer... - Roof Mounted Cargo Basket For a Small Travel Trailer With 1-1/2 Inch Round CrossbarsThe SportRack Vista Roof Mounted Cargo Basket # SR9035 would be a good option for your travel trailer with the 1.5" round crossbars. This basket has cradles with round notches to better clamp onto your crossbars. The basket is 44" long, 39-1/8" wide, and 6-1/4" tall. It has a steel construction that will hold up better on your travel trailer as trailers tend to bounce around more than most vehicles due to their lack of suspension dampening. This does require a crossbar spread of 23-5/8"...
view full answer... - Is There a Way to Attach Solar Panels to Yakima JetStream Crossbars The only way to attach solar panels to roof rack crossbars is either by drilling through the crossbars or finding a way to mount them utilizing the integrated channels. I am not aware of any brackets for this purpose specifically unfortunately so you'll need to get creative. There is another option which would be to mount the panel(s) inside a cargo tray like the Inno Shaper 100 Roof Cargo Basket part # INXA569 so you are drilling into the tray and not the rack. This option would also offer...
view full answer... - Which Inno Shaper 100 Roof Basket Fits on OEM Crossbars of 2003 Honda CR-VThe Inno Shaper 100 cargo basket part # INXA569 that you referenced requires crossbars that have top channels on them. If instead you wanted something that can attach to your OEM crossbars on your 2003 Honda CR-V you'd want the similar Inno Shaper 100 part # INA510 which has hardware that is compatible.
view full answer... - Is There a Way to Add the Inno Shaper 100 Roof Rack to My Non-Square Crossbars on My 2018 QX60?I have a basket solution for you. While there is a way to attach the Inno Shaper 100 if you have aero-style crossbars on your 2018 Infiniti QX60, but the solution will only work if you have compatible t-slot channels in your current crossbars. I went ahead and attached a picture of the required t-slot dimensions to this answer. I recommend that you measure your channels to make sure the Shaper 100 will fit. Also, Inno only provides this basket in a black finish. This is the # INXA569. If...
view full answer...
- What Rooftop Cargo Basket Will Fit My 2019 Toyota C-HR With OEM CrossbarThe compatibility of the Inno Shaper 100 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 41-7/8" - 110 lbs, part # INXA569, with the factory roof rack on your 2019 Toyota CH-R, will depend on whether your roof rack has t-channels. The Inno Shaper 100 you have attached to your question can only be mounted on crossbars with t-channels. While Inno does make a version of this roof cargo basket that can be clamped to square crossbars, they do not have one that clamps to factory rack...
view full answer... - Inno Basket Compatibility with Rola Roof Rack For 2010 Jeep Renegade Trailhawk.The Inno Shaper 100 Roof Cargo Basket # INXA569 would work with the DISCONTINUED Rola Sport REX Series Roof Rack 59686 you mentioned but it is no longer available. Instead, you can use your Inno cargo basket with the Thule WingBar Crossbars # TH711400, which attach to your raised rails with the Evo Raised Rail # TH710401 feet. This will be a great combination for your 2010 Jeep Renegade Trailhawk.
view full answer...
- Roof Rack Recommendation for 2009 Jeep LibertyFrom all of the info I'm seeing it looks like a 2009 Jeep Liberty only comes with the raised rails. If you have space below your crossbars then I recommend using the Malone AirFlow2 Roof Rack # MPG216 for your Jeep. If you don't have any space below your crossbars go ahead and send me a photo of what you have so I can see if we have any alternative options for you as none of our manufacturers have a fit listed for flush rails. If your goal is to add some extra cargo-carrying space then...
view full answer... - Low Profile Roof Rack and Cargo Basket for a 2015 Jeep Cherokee TrailhawkI do have an option for you but most options such as the Yakima LoadWarrior Roof Cargo Basket part # Y07070 will required a set of crossbars that extend up above the raised side rails. However, we do have the Yakima RailBar Roof Rack part # Y00447-0448 which will sit level with the side rails so you don't have to worry about added height. That said, you can only use the Yakima RailBar Roof Rack with a channel mounted cargo carrier because there is no space between the roof and bottom of...
view full answer... - Recommended Low Profile Roof Basket for Yakima JetStream CrossbarsI do have a solution for you, however the Inno Shaper 100 Roof Cargo Basket # INXA569 referenced in your question will not work with the T-channel on your Yakima JetStream Crossbars. The channel dimensions on the JetStream bars do not match up with the mounting hardware for the Inno Basket. For your Yakima roof rack, I instead recommend the Thule Canyon roof cargo rack, # TH859XT. This is another low-profile basket that will actually clamp around the aero-style bars on your vehicle instead...
view full answer... - Can SmarT-Slot Mounting Kit Be Used for LoadWarrior Cargo BasketThe Yakima LoadWarrior # Y07070 has the older style mounting brackets and unfortunately isn't compatible with the SmarT-Slot Mounting Kit # Y07356. The only way to use an upgrade kit is by using one of the newer cargo baskets like the Yakima OffGrid # Y07139, or even changing to a different basket like the Inno Shaper 100 # INXA569 which comes with T-Slot mounting hardware directly.
view full answer... - What Roof Cargo Solution will Attach Directly to the Raised Rails on My 2011 Toyota Highlander? For a great cargo basket that attached right to your raised rails on your 2011 Toyota Highlander, I recommend the Surco Safari Rack 5.0 Rooftop Cargo Basket for Factory Rails - 60" Long x 50" Wide # SPS5060-1101. The way that you can confirm the fitment of this basket on your vehicle is to make sure that your rails are less than 50 inches apart between the raised rails. If they do not exceed 50 inches, the Surco Safari will fit. I recommend measuring your roof to make sure that your raised...
view full answer... - Roof Rack Recommendation for Carrying a Kayak- 2019 Ford Escape with Bare RoofI'd highly recommend an Inno rack system for your vehicle. Inno provides a super-high quality product without the higher price tag seen with other brands that might be more universally well known. High value and top quality. Given the fact that you expressed an interest in transporting a kayak, using a through-bar system makes it easier for one person to get the kayak up on the vehicle roof. Pick up one end, place against the crossbar where it extends past the roof rack foot, then you...
view full answer... - Which Cargo Basket Will Mount Onto The Factory Crossbars On A 2018 Dodge DurangoI have an excellent solution for you, but the Inno Shaper 100 Roof Cargo Basket # INXA569 is made to slide into the T-slot channel on top of crossbars, which your 2018 Dodge Durango does not have. If your vehicle does indeed have the crossbars running left to right across your roof, then I would look into the Aluminum Roof Mounted Cargo Basket - 44" Long x 39" Wide x 7" Deep # 288-09200. This basket is compatible with crossbars that are no taller than 2" and no wider than 4-3/4". The...
view full answer... - Recommended Roof Rack and Aluminum Cargo Basket for 2013 Kia Rio 5 DoorFor your 2013 Kia Rio 5 door, to add a roof basket you will first need to add a roof rack. I recommend the Inno Aero Roof Rack # INXB100-108, # INXS200, and # INK608 which is a custom fit for your vehicle to mount to a naked roof (no side rails). The rails will be 27-1/2 inches on center. I've attached the installation details to assist. Then for an aluminum roof basket, we have the following options: Aluminum Roof Mounted Cargo Basket - 44" Long x 39" Wide x 7" Deep # 288-09200 Thule...
view full answer... - How to Secure Cargo to Inno Shaper 100 Roof Cargo BasketThis is a little tricky as the Inno Shaper 100 Roof Cargo Basket # INXA569 doesn't have a specific cargo net made for it. The best recommendation I have in the way of a net is the Reese Stretchable Cargo Net # H9500100 and just making sure you wrap the hooks around the bars and secure them back directly to the cargo net. For this application I recommend using something like the etrailer Cam Buckle Cinch Straps # E98876-2 instead because you can wrap them around the bars and pull them as...
view full answer... - Roof Rack and Cargo Basket Recommendations for a 2007 Toyota SequoiaFor your application I recommend installing the Thule 53" WingBar Evo Crossbars # TH711420 and Evo Raised Rail Feet # TH710401 on your 2007 Toyota Sequoia. This is one of the nicer roof rack systems on the market as it's really easy to install and the rubber strip on the top makes it really simple to use T-Slot accessories. Then if you're wanting to use a cargo basket I recommend checking out the Inno Shaper 100 # INXA569 if you want something smaller that mounts using the T-Slot, or the...
view full answer... - Does SkinnyWarrior Roof Cargo Basket Mount with Clamps or in Crossbar TracksThe Yakima SkinnyWarrior Roof Cargo Basket # Y07014 uses a clamping system instead of a track mounted system. The U-Bolts ate a bit more sleek looking than the standard U-Bolt kit though as the housing they insert into hide them really well. Track mounted cargo carriers aren't super common but we do have a few options you can check out from Inno with their Shaper 100 # Inno Shaper 100 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 41-7/8" - 110 lbs Item # INXA569 and their Roof...
view full answer...
Do you have a question about this Roof Basket?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Jameson C
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Noah M
Written by:
Ronnie R
Video by:
John S
Test Fit:
Evangeline M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sierra K.
11/19/2021
The panels need to be screwed in straight. If they are screwed in at an angle then they will not sit flush and it will strip the mounting holes.