bing tracking image
  1. Roof Rack
  2. Inno
  3. Fit Kits
  4. 4 Pack
Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet

Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet

lowest price pledge
Retail:$104.71
Our Price: $89.99
You Save: 14%
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 2 lbs
Quantity: 
In Stock
Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet 4 Pack INK680
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSUT feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads. Lowest Prices for the best roof rack from Inno. Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet part number INK680 can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (410)
  • Q & A (0)
  • Photos
  • Why etrailer?

Inno Roof Rack

  • Fit Kits
  • 4 Pack
  • Inno

These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSUT feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads.


Features:

  • Custom-fit clamps and pads let you install Inno roof rack feet on your vehicle with a naked roof
    • Works with XS200, XS250, or INSUT feet
    • Pairs with 4 feet and 2 crossbars (sold separately) to create a complete roof rack
  • Clamps are designed specifically to fit the curves of your doorjambs
    • Mount to roof rack feet with bolts
  • Molded pads are custom designed to fit the contours of your roof
    • Protect your roof surface from scratches and abrasions
    • Press onto the bottoms of your roof rack feet
  • Limited lifetime warranty


K680 Inno Fit Kit Hooks for Flush, Through, and INSUT Stays

Item # INK680

Installation Details INK680 Installation instructions




Customer Reviews

Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet - INK680

Average Customer Rating:  4.8 out of 5 stars   (410 Customer Reviews)

These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSUT feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads.

by:
2017 Hyundai Tucson

Thank you so much for providing the below information! My experience with etrailer.com has been great so far and I appreciate the follow up.

The crossbars fit perfectly and I will definitely be writing a review. However, I realized when I opened the bike racks that I purchased the wrong rack for my car/bars.

Would you be able to provide me with information on how to return the bike racks???


Comments
This inno fork mount bike rack part # INXA391 that was purchased is for aero bars. The one you need is for square bars inno part # INA391
Inno Fork Lock III Roof Bike Rack - Fork Mount - Clamp On - Aluminum
$147.71
. I have attached the link below.
-- Etrailer Expert Heather A - 01/26/2019


by:

I really love these roof racks. Easy to put on as long as you have a tape measure. I can put mine on in the spring and not have to worry about them coming loose with the torque wrench that was provided. If you are worried about getting the right ones, customer service is great and fast. I had lost the instructions so couldn’t remember the measurements to install, one quick email and I had the PDF copy.




by:

Great quality and easy to install




by:




by:




by:
2019 Hyundai Tucson




by:




by:




by:
2019 Hyundai Tucson




by:

Excelent good




by:

Review from a similar Fit Hooks in Roof Rack


Great system. Got it installed the night before a road trip, and once you get the hang of if, assembly is easy and intuitive. This system is rock solid and well done.

Things I wish I knew that would have helped in my decision:

1) After you install the footbeds, the rails and tower easily remove as one unit in the future, and they include little covers to put over the feet. No more long debates about wind noise. If you find them modify or don’t like the look, take it off in five minutes. Even the Allen wrench is stored neatly in the rack.
2) I had been a long time Yakima user, so that’s where I started with my GX rack. Having searched far and wide for landing pads, I was all set. Step one of the Yakima system: remove factory rails. Having just spent good money on this truck, I’m not taking off factory rails and adding silicone around the holes to create new mounting points. Innos fits nicely to the factory rails.




by:

Review from a similar Fit Hooks in Roof Rack


I am more than pleased by the service that I had at etrailer. I was looking for a very old roof rack for my Subaru Legacy 2007 and etrailer had it. I was suspicius about it so I wrote them and got a quick and friendly answer that confirmed the fit and availability. Delivery was quick and the tracking from etrailer website was outstanding.




by:

Review from a similar Fit Hooks in Roof Rack


Quick and easy. This roof rack was shipped quickly. Installation was super easy and it looks like it was made for my truck. Holds my canoe perfectly. Thank you!




by:

Review from a similar Fit Hooks in Roof Rack


etrailer was great to order from! Going to the website makes it easy to see what roof rack will fit your vehicle. Ordering process was a breeze and the fulfillment updates were great. Ordered on the 13th and received it on the 16th so the FREE shipping was super fast. New installs of anything can always be challenging but once I read the the instructions it all went pretty smooth. Installing this Inno Roof Rack onto our 2021 Tacoma TRD Sport was pretty simple and took less than an hours from start to finish. Now we are ready to load up out Thule cargo carrier when we hit the road.




by:

Review from a similar Fit Hooks in Roof Rack


Once again etrailer.com delivers. Finding a crossbar solution for my 2021 Lexus GX 460 was far more challenging than expected until I visited the site and found exactly what I needed. The fit kit worked great and the quality of the feet and crossbars on par or better than other brands (who dropped the ball on having a product available for this vehicle). The rack is on, secure and now carrying my Thule cargo box. Very happy.




by:

Review from a similar Fit Hooks in Roof Rack


Install was straight forward, read the instructions of both the hooks and the bars as they are different per vehicle. Build quality initially seems very good. Fit and finish superb. If you’re looking for a rack that is low drag and low noise this one is super quiet, even with a Yakima Skybox on it it’s quiet. Will update with mpg effect later.




by:

Review from a similar Fit Hooks in Roof Rack


Shipping and packaging was very good and delivered on time!
Love the roof rack stays




by:

Review from a similar Fit Hooks in Roof Rack


I bought these as part of a kit with 60" Aero bars and the appropriate kit for my 14 Flex. I spent probably an hour and a half double checking my measurements and getting them torqued down properly. I spaced the bars on top of the car just a little wider than proscribed because I was planning on carrying 4x8 plywood, and it looked better to my eye. One thing to watch for: The instructions for the car-specific kit (in my case INK263) show the foot spacing measurements for a square bar, and the measuring point for these feet and Aero bars is different. That measurement point is indicated in the instructions for the feet, not the kit. Same numbers, just different reference point. Otherwise, they look good and are rock solid.




by:

Review from a similar Fit Hooks in Roof Rack


Nice rack fit's perfect on my scion Xb




by:

Review from a similar Fit Hooks in Roof Rack


Great fit for a 2015 Honda Civic SI. If putting a long boat (17' Mad River pictured), the Thule canoe clamps are recommended. Without them, highway speeds would be risky if at all possible. I was pleasantly surprised out how stable the boat was on the rack without the clamps.




by:

Review from a similar Fit Hooks in Roof Rack


The Inno roof rack fit my 2014 Honda CRV very well. I used it immediately on a 500 mile trip and the rack is fantastic. I connected an XL Thule car box and 11'-6" paddle board to the rack and everything fit fine. The aero design is great and we did not hear any noise during the trip.




by:

Review from a similar Fit Hooks in Roof Rack


I purchased the Inno Rack system and Rhino Rack 581 saddles for my 2007 Mercury Montego. The instructions were easy to follow, and the rack is rock solid. It makes loading and unloading my kayak a breeze. I previously used roof pads and that was ridiculous compared to what this rack does for me now. I am amazed with how quiet with and without the kayak attached is - I don’t hear anything except the very slightest amount of wind with the windows open on the highway. I always have put a one turn twist in the bow and stern straps, but for the rest they’re all straight. I added an extra strap on the rear crossbar that goes behind the rear combing of my cockpit for extra security- but that’s just me. I’ve included a photo to show my setup. Thank you so much Mark S, Becky B, Carol C, and George J. etrailer rocks.




by:

Review from a similar Fit Hooks in Roof Rack


These cross bars are great. Bought them for load capacity at this budget friendly price. They exceed my expectations and do what they are designed to do. Sturdy and great look! Not an aerodynamic design, leading to plenty of wind noise, but that wasn’t a dealbreaker for me.




by:

Review from a similar Fit Hooks in Roof Rack


One side fits tight, the other doesn't. The instructions recommends a gap takes place between the roof and foot pads. The side with the gap slips even when fully tight. Will call Inno


Comments
This generally happens when the measurements are off. We recommend that you remeasure the gap that is between the roof and foot pads.
-- Etrailer Expert Katrina B - 04/20/2022


by:

Review from a similar Fit Hooks in Roof Rack


Rack detached from my roof on the highway at about 70mph, taking my cargo container with it. Luckily, no one was behind me as it would have very easily caused an accident. Customer service was terrible and didn’t accept a return. Damaged the contents of the cargo container.Do not buy this product or from this company as they will not help.


Comments
There are a lot of factors involved when installing and using a roof rack. For the 2018 Ford Focus Sedan the roof rack capacity is 120 pounds although you would want to also check that the manual says for the vehicle. Before tightening anything down you will want to look at the instructions to find the proper spread between the bars and also the feet. Once that is down you will take the included Allen tool and tighten down the bolt. Next you will install the fit kit which will have you start with the foot pad. The foot pad will line up with the holes at the bottom of the foot. These will push into place and are numbered so that the right pad lines up with the right foot. To install the clamp you will remove the screw from the outside and loosely tighten it up to hold the clamp into place. The next step is to measure from the center of the doorjamb you will get the measurement to the center of the bar. You will find this in your instructions. Repeat on the other side. Then you will take the tightening tool and snug it up against the door. You will do this on the passenger side as well. Then you will go back and forth from drivers to passenger side giving about five or six turns each time until its completely tightened down. When it makes the clicking sound you will know its completely tied down. You do not want to over tighten it.
-- Etrailer Expert Jenny N - 03/04/2022

25
410
Show More Reviews

See what our Experts say about this Inno Roof Rack



  • Recommended Roof Rack With Square Load Bars For 2017 Hyundai Tucson
    I have just what you are looking for but Thule doesn't make a compatible system. My recommendation is the Inno roof rack consisting of the Inno Square Crossbars - Steel - Black - 54" Long - Qty 2 # INB137, the Inno Feet for Square Crossbars # INSUT and Custom Fit Kit # INK680. I've attached a video of a similar fit to assist. This roof rack is rated for 120 lb capacity.
    view full answer...
  • Factory Look Roof Rack Recommendation for a 2017 Hyundai Tucson
    For your 2017 Hyundai Tucson I recommend the Inno roof rack consisting of the crossbars # INXB108-115, flush feet # INXS200, and custom fit kit # INK680. This will look the most like a factory roof rack of any option we carry. It will have crossbars that end into the feet so they won't stick out.
    view full answer...
  • Which Inno Rack Do You Recommend for a 2018 Hyundai Tucson?
    If you used the etrailer.com fit guide to find an Inno roof rack for your 2018 Hyundai Tuscon with a bare roof, all of those crossbar lengths will work for your vehicle. The racks that we have confirmed on our fit guide are confirmed to securely fit onto your vehicle properly. For a recommendation of an Inno roof rack, I recommend the following parts: - Inno Aero Crossbars - Aluminum - Black - 51" Long and 54" Long - Qty 2 # INXB130-138 - Inno Through Feet for Aero Crossbars - Naked...
    view full answer...
  • Roof Rack Recommendation for 2018 Hyundai Tucson to Carry Thule Hullavator
    To install a Thule Hullavator on your 2018 Hyundai Tucson with a naked roof (thanks for picture), you will first need to install a roof rack. For that you'd want the Inno Square bar roof rack part numbers # INB137, # INSUT, and # INK680 which is a confirmed fit and will give you bars that the Hullavator can attach to.
    view full answer...
    Image 1 for
  • Inno Roof Rack Recommendation for 2019 Hyundai Tucson
    For your 2019 Hyundai Tucson the Inno Roof Rack I'd recommend is the aero bar kit part numbers # INXB130-138, # INXS250, and # INK680 because it will give you the quietest ride quality over the square bar options from Inno.
    view full answer...
  • Flush Mounted Roof Rack Fit For 2020 Hyundai Tucson With Naked/Bare Roof
    We do have an option for a flush-mounted roof rack that fits your 2020 Hyundai Tucson with a naked roof, but I verified with Rola that there is not a fit for their rack on your '20 Tucson. What will fit instead is an option from Inno, which has the same flush-mounted style as the Rola for a streamlined look. The correct parts for your Tucson are the following: - Inno Aero Crossbars # INXB108-115 - Inno Flush Feet for Aero Crossbars - Naked Roofs # INXS200 - Custom Fit Kit for Inno #...
    view full answer...
  • Recommended Roof Rack for a 2021 Hyundai Tucson With Bare Roof
    I have great news, there are plenty of options for hauling kayaks, cargo boxes, cargo baskets, etc. on top of a 2021 Hyundai Tucson without factory side rails. If you have a bare roof without side rails then I recommend the Inno Aero Crossbar System part # INXB130-138, part # INXS250, and part # INK680. This system has aero crossbars and a custom fit a sleek look. It can then be used for pretty much any kayak carrier or cargo box/basket you like which I have attached lists of below.
    view full answer...
  • Recommended Load Stops for Inno Aero Bar Roof Rack on 2018 Hyundai Tucson
    The Inno Aero Bar Roof Rack that you referenced, which consists of # INXB108-115 for the two 42 inch Aero Crossbars, # INXS200 for the Flush Feet, and # INK680 for the Custom Fit Kit, is confirmed to fit your 2018 Hyundai Tucson and will work great. To use with the T-slots on these bars, I recommend the Rola Load Stops # 59794. I went out to our warehouse and was able to verify that these are compatible with the Inno channels and will work great to provide you with load stops to hold...
    view full answer...
  • What Size Crossbars Do I Need for the Thule Hullavator on My 2019 Hyundai Tucson?
    For a crossbar kit that will allow you to fit the Thule Hullavator # TH898 on you the roof of your 2019 Hyundai Tucson with factory flush rails involves the following components: - Inno Aero Crossbars - Aluminum - Black - 54" Long and 57" Long - Qty 2 # INXB138-145 - Inno Through Feet for Aero Crossbars - Naked Roofs - Qty 4 # INXS250 - Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet # INK680 With this Inno system, you will be able to use the top channels in the crossbars...
    view full answer...
  • Recommended Roof Rack and Kayak Carrier for 2021 Hyundai Tucson with Bare Roof
    The Inno Aero Crossbar Roof Rack part # INXB138-145, part # INXS250,and part # INK680 is an excellent option for a 2021 Hyundai Tucson with bare roof. This is an aero bar system so there will be reduced wind noise and mpg affects. The extended crossbars will be great for kayaks, giving you more space and making loading much easier. In order to secure a kayak you'll still need a carrier, the etrailer J-Style Kayak Carrier part # e98878 is what I recommend. It has all the tie-downs you need...
    view full answer...
  • Roof Rack and Board Carrier for 2019 Hyundai Tucson
    To carry your boards on the roof of your 2019 Hyundai Tucson the first thing you'd need is a roof rack like the Inno aero bar rack part # INXB130-138, # INXS250, and # INK680 which is a confirmed fit and a higher quality rack at a lower price point. Then for a carrier for the boards the Thule SUP Shuttle part # TH811XT would be a really great option that is easy to use and works well.
    view full answer...
  • Recommended Solution for Carrying 2 Kayaks on Roof of 2017 Hyundai Tucson
    Inno makes a great roof rack solution for your vehicle. You might be more familiar with names like Thule or Yakima, but Inno is very well known on the west coast for making high quality roof racks at reasonable prices. You can construct a roof rack using the following parts: Crossbars, item # INXB138-145 Roof Rack Feet, item # INXS250 Vehicle Specific Clamp Kit, item # INK680 The crossbars used on the rack system above would be perfectly compatible with the Rhino Rack item # S512-S512X...
    view full answer...
  • Recommended Parts Needed to Carry a 12 Jon Boat on the Roof of a 2019 Hyundai Tucson
    We do have a solution for you via installing a roof rack on your 2019 Hyundai Tucson. If your Tucson has flush mount rails that run front to back then I recommend the Thule WingBar Evo roof rack which consists of 47" # TH711220 WingBar Evo Bars, the Evo Flush Foot Pack # TH710601, and Fit Kit # TH186013. If you just have a naked roof (no rails) then I recommend the Inno Aero style roof rack which uses Crossbars # INXB138-145, Through Feet # INXS250, and Fit Kit # INK680. The Thule roof...
    view full answer...

Do you have a question about this Roof Rack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality roof rack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Ronnie R
Written by:
Ronnie R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.