To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
Features:
Specs:
These low-profile Inno Aero crossbars let you build a stylish, aerodynamic roof rack for your vehicle. The crossbars require 4 Inno Flush or Through feet to mount the rack to your roof. You may also need a custom fit kit to mount the crossbars. Built-in T-slots in the tops of the bars let you easily mount carriers and accessories on the rack. Flexible rubber strips in the channels keep out dirt and require no trimming or adjustment. The crossbars are also constructed of strong yet lightweight aluminum so they won't rust.
These lightweight bars have an elliptical shape. This aerodynamic, low-profile design helps to reduce wind noise and drag when you drive. This means you won't need to add a fairing.
Inno Aero crossbars are constructed of sturdy, lightweight aluminum. Internal extrusions add strength and structural rigidity without adding a significant amount of weight. The bars are rustproof so you can leave them on your roof all year long, wherever you go. The sand-blasted powder coat finish resists corrosion, scuffs, and scratches. And the matte black color will look good on any vehicle.
Each crossbar has a channel in the bottom that lets you install Inno feet (sold separately). Slide the channel cover over to reveal a mounting hole for the foot. Clip the foot into the crossbar and then slide it into place along the channel. Built-in bar end stops in the channels will keep the feet from sliding off the ends of the bars.
To complete installation, mount the feet to your roof. This may require a custom fit kit (depending on your application). Attach the locking covers (included with the feet) to secure the roof rack to your vehicle. Locking the covers also secures T-slot-mounted accessories to your crossbars.
This bar has a built-in T-slot that allows you to mount bike racks, watersport carriers, ski racks, and more. The EZ-Slide rubber strip in the bar lets you mount accessories without the need to remove or trim the strip. Just press down on the ends of the flexible strip and slide your accessory's mounting hardware into the T-slot. This strip has a plastic coating so it's easy to slide T-bolts along the channel. The strip runs the full length of the bar, so it helps keep dirt out of the channel when you're not carrying accessories.
You can also attach most clamp-on accessories to the bar, and the rubber strip provides a no-slip cushion for any accessories that rest on it.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to be taking a look at the Inno Aero crossbars. These low-profile crossbars let you build a stylish, aerodynamic roof rack system for your vehicle. Each crossbar requires two Inno feet to mount the bars to your roof. This system may also require a vehicle-specific custom fit kit depending on your application. Those items are sold separately and available at etrailer.com.These bars feature a really nice elliptical shape. That's going to help create an aerodynamic system.
What that does is it really helps reduce wind noise and drag as you travel down the road. Each bar features a slight bend at the center of the bar. That's going to help ensure a sturdy custom fit rack. Each bar also features a full-length integrated t-slot that makes it easy to slide channel-mounted cargo carriers and accessories onto the bars. These bars will also accept clamp-on accessories that would conveniently clamp or wrap around the bar.That rubber strip is a flexible rubber strip.
That's going to keep out dirt, grime, and moisture. It allows for simple mounting in the t-slot. All you have to do is press down on the strip and slide the accessories into the slot. No trimming or cutting of the strip is required. That strip features a really nice plastic coating that's going to allow t-bolts to slide easily along the channel without damaging the rubber strip.
Another neat advantage of that rubber strip is it creates a really nice cushion and slip resistance for your gear.Here on the bottom, each bar features a channel on each side. These channels allow easy installation when installing the Inno roof rack feet. It's got this integrated clip system here. That makes it really easy. All you got to do is clip the foot into the crossbar, slide it along the channel to where you need it.
Now I do like that because this channel cover slides over and reveals a mounting area for the foot. The foot clips into the crossbar and then slides into place along the channel. It also has the built-in bar end stops in the channels. These stops will keep the feet from sliding off the ends of the bars.The other thing I like about this integrated design is it fills this gap right here, which is going to help reduce and maybe eliminate sometimes that whistle that we get from wind wanting to get in there and circulate and creating a whistle as we travel down the road. That's a really nice integrated feature of this system.Now these bars are made from a lightweight aluminum construction. It's very strong, durable, and rust-proof. Features a internal extrusion that provides exceptional bar strength. It features a glass-blasted powder-coated finish to resist rust, corrosion, scuffs, and scratches. This system is matte black in color, which gives these bars a very good, sleek, really nice design.Now you'll notice that it does not come with end caps. Locking covers or end caps come with Inno feet. Again, Inno feet are sold separately and available at etrailer.com. These bars, from front to back, have a width of 3-1/8" wide and a thickness or height of 1-1/8" tall. They're available in a variety of lengths. You can check out etrailer.com to see all the options available. They're covered with a limited lifetime warranty. That's going to do it for today's look at the Inno Aero crossbars.
Average Customer Rating: 4.8 out of 5 stars (192 Customer Reviews)
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.I was trying to put a roof rack onto a Dodge Durango SRT...not a typical vehicle for this accessory! I looked everywhere for a suitable roof rack and thought I was settling by ordering the Inno kit from etrailer. I could not have been more wrong! I am so happy with the purchase! I was shocked that my partner and I had the whole system installed in less than 30 minutes in the dark! I couldn't wait to try the install once I received the package. I even did a test drive to see if the aero crossbars made noise, but no issues there! They are very quiet (unlike a ladder rack I had on a truck before this). 10/10 recommend this to others.
Easy to install. Instructions are almost perfect. Watching the video really helped, especially the tip of laying the rails down and then marking the trim. I used a hacksaw to cut the trim, really easy. Thank you guys for an awesome product. I hope it is durable, it feels solid, but only time will tell.
Review from a similar Elliptical Roof Bars in Roof Rack
Once again etrailer.com delivers. Finding a crossbar solution for my 2021 Lexus GX 460 was far more challenging than expected until I visited the site and found exactly what I needed. The fit kit worked great and the quality of the feet and crossbars on par or better than other brands (who dropped the ball on having a product available for this vehicle). The rack is on, secure and now carrying my Thule cargo box. Very happy.
Review from a similar Elliptical Roof Bars in Roof Rack
Originally, I was waiting for the Yakima crossbars to be restocked for my GX460 but decided I couldn’t wait it out any longer and went with the Inno’s aero set. Overall, they look great, fit great and seem to be very good quality. I was able to assemble the rack myself, it took me about an hour and half, I wish the installation was a bit easier but after watching the video from etrailer it all came together perfectly !
Review from a similar Elliptical Roof Bars in Roof Rack
Got these with the custom fit kit (INK860) and the through feet/stays (INXS250) for my 2014 Ford Fusion Hybrid. Assembly's not difficult, though you do have to work with three different instructions: 1 for the stays/feet (the main install instructions), one for the Crossbars (minimal to do there), and one for the custom fit kit (again, minimal, though this one is crucial as it contains the measurements for the setup). Things went pretty smoothly. However, when I put it on my roof at the measured distances from the center line, the feet didn't both occupy the rain gutter as they are supposed to. I checked the measurements, and both the front stays were at 21.5" and both back stays were at 21 3/8 " . Since those were the called for measurements, I'm not sure why I didn't fit perfectly. However, they're great and I can't wait to put them to use with my kayak and snowboard and bike. Thanks E-Trailer. Photos show how great the system looks as well as some of the gaps at the rain gutters. I don't think it's crucial to readjust those. I did try several times but couldn't seem to get them just right.
Heather A - 07/03/2021Review from a similar Elliptical Roof Bars in Roof Rack
Very nice quality, made in Japan. Easy to install using the Inno XS150 base stays. The 51" was a nice size for my 2015 Touareg. Many of the manufacturers recomment wider (53-54"), but I like the narrower profile. Unfortunately, the Aero design still creates a slight bit of wind noise at highway speeds, and it gets worse if the sunroof is raised (vent). I like the soft rubber T-channel material which allows the accessories to mount without cutting the material. I also like the slightly arched shape.
Heather A - 12/28/2020Review from a similar Elliptical Roof Bars in Roof Rack
Shipping and packaging was very good and delivered on time! Glad I went with the Aero cross bars for the less wind noise!
Review from a similar Elliptical Roof Bars in Roof Rack
Easy install on 2021 4runner off road premium. Looks clean, matchs blacked out on white, eadges of chrome cap matches mirror accents and tail lights. Etrailer video was simple to follow. What it didn't show was the foam rubber strips that you put on under the t tracks slot. With cover off and top most flat part of clamp to edge of bar measures about 5.5inches. Make sure the clamp is flush with bar when you measure. Overall looks good
Review from a similar Elliptical Roof Bars in Roof Rack
Installation went pretty smoothly. The trick is to fully understand each step before moving to the next. There are a lot of small parts which at first was a little intimidating, but soon I was able to "get with it". I love the finished product and think you helped me get a good deal. Thank you for that
Review from a similar Elliptical Roof Bars in Roof Rack
These fit the car along with the other Inno items perfectly. They are very secure when combined with the other Inno products. No worries of the rack system coming off. Using them to transport kayaks using kayak holders.
Review from a similar Elliptical Roof Bars in Roof Rack
Aero roof rack is very stylish and gives my car a good look. It’s low profile look is what I really enjoy about it. The bars are pretty wide so any bars you do add to them, you’ll have to do IN-DEPTH research to make sure they do fit. I’ve had some run in with some issues with bike racks
Review from a similar Elliptical Roof Bars in Roof Rack
Easy! Thank you etrailer, even a girl can do it!
Review from a similar Elliptical Roof Bars in Roof Rack
Only really used it for 2 week trip cross country, been on top of my van ever since. seems to be holding up well. Excellent customer service from etrailer; my original choice was out of stock and they hooked up a replacement in time. Thanks!
Review from a similar Elliptical Roof Bars in Roof Rack
Packaged good and arrived early. No issues with the cross bars
Review from a similar Elliptical Roof Bars in Roof Rack
Arrived damaged after waiting 40 days for this item that was listed as in stock but was not! Then told it was in that it finally got to them and it was shipping. Then no ship! Called and was told it was there but they can not find it. Stocked in the wrong area! Finally received it. The damage on the cross bar was packed damaged. No damage to the box! A little unhappy.
Jenny N - 03/17/2022Review from a similar Elliptical Roof Bars in Roof Rack
I upgraded to these Aero Crossbars hoping it would mean a quieter drive with less wind noise. I am so glad I did. There is not noise at all with these bars. I use them with my roof cargo carrier and I don't even notice it is there. These bars are even strong enough to haul my canoe. I am very pleased with them.
Review from a similar Elliptical Roof Bars in Roof Rack
I recently drove round trip in terrible weather to Boston from Orlando a trip of over 1500 miles...My Inno Elliptical Roof Bars Roof Rack held up perfectly. I especially like the "keyed" function. I highly recommend them to anyone needing a strong, weatherproof, and secure roof rack.
Review from a similar Elliptical Roof Bars in Roof Rack
I like that the bars don't extend too much beyond the width of the vehicle (2012 Toyota Prius V). No noticeable wind noise or fuel economy change. They held two bikes just fine.
Review from a similar Elliptical Roof Bars in Roof Rack
Tule and Yakima did not have a rack for my Nissan murano. So it was a blessing to find the immo rack. It seems like it can fit any car model. It's strong and secure. I feel my equipment will be safe with this rack.
Review from a similar Elliptical Roof Bars in Roof Rack
Seems to be solid railing and aerodynamic easy instillation for the most part. Measurement recommendations are a bit off.
Review from a similar Elliptical Roof Bars in Roof Rack
This inno rack fits well with my car. I installed a cargo box with it. The roof rack is well built and sturdy.
Review from a similar Elliptical Roof Bars in Roof Rack
Need to be two 54”
Heather A - 06/30/2021Review from a similar Elliptical Roof Bars in Roof Rack
These crossbars are awesome!
Review from a similar Elliptical Roof Bars in Roof Rack
thanks to Adam for help and competent approach. Adam listened impeccably and in the shortest possible time helped to deliver the goods I needed
Review from a similar Elliptical Roof Bars in Roof Rack
Works perfectly! As indicated in previous review the tech writers at Inno should update the instructions on measurement process, but after I placed and centered the roof rack on my vehicle and tightened it down it worked great!
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.