To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
Features:
Specs:
These low-profile, aerodynamic Vortex Aero crossbars let you build a stylish aftermarket roof rack from scratch. The crossbars require 4 Rhino-Rack legs (manufactured in 2014 or later) and a custom fit kit to mount it to your roof. Each bar extends past the roof rack legs to maximize the space for mounting carriers and accessories. Rubberized Vortex strips in each crossbar's top channel disrupt airflow for a quiet ride, and the bars are constructed of aluminum so they won't rust. The crossbars also include Secure Core endcaps with plastic locks to help deter theft of channel-mounted accessories.
The rubberized Vortex strips in the top channel of each crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbars cut through the air with minimal drag - even at highway speeds.
The Vortex Aero crossbars are made of structural-grade anodized aluminum with H-shaped internal extrusions. These extrusions strengthen the bars without adding a significant amount of weight. And the aluminum bars won't rust so you can leave them on your roof year-round.
Each crossbar has a channel in the bottom for mounting to Rhino-Rack roof rack legs (sold separately). Each end of the channel includes a rubber ruler to help you center the bar on your roof. Simply use the numbers and hash marks on the rulers to ensure the legs are spaced properly in the channel.
Each Vortex Aero crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strips in the top channels come in 3 pieces, so they're easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channels capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.
You can also attach most clamp-on accessories to the bars, and the Vortex strips provide shock-absorbing, no-slip cushions for any accessories that rest on them.
Each crossbar includes 2 Secure Core locking endcaps made of durable polypropylene. These endcaps lock with a universal tubular key. The polypropylene locks secure the endcaps to the crossbars and help to secure channel-mounted accessories to the crossbars. For maximum security, you can upgrade to endcaps with all-metal lock cores (RRVA-LEC4 - sold separately).
Average Customer Rating: 4.7 out of 5 stars (2073 Customer Reviews)
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.This review is for the Rhino Rack Vortex Aero Aluminum-Silver crossbars and
associated legs and custom fit kit (RRVA137s-2, DK284, RRRLKVA) necessary for a naked roof installation on a 2018 Honda CR-V. Just enter the model and year of your vehicle and etrailers website will tell you exactly what additional items are necessary to complete the install. etrailers installation instructions and videos are very helpful. The installation document provided is for more than one vehicle and for more than one style rack, so take your time to understand witch measurements apply to your installation and refer to the installation video if necessary. ON that note: The measurements given for front rack did not fit as nicely on the roof as the rear rack, I adjusted the the front rack measurements slightly. I would suggest trial fitting on your vehicle before cutting the metric rulers to final length. Stick On tags are supplied to indicate front, rear and the location to install on your vehicle. Once the rails are adjusted and tagged you can remove and reinstall the racks very quickly. Korren was very helpful in keeping me informed as to availability of items in stock and email shipping tracking. I am very satisfied with etrailers customer service and happy with the appearance and functionality of the Rhino racks.
I posted a detailed review with photos in my fit kit review by Anthony. If your thinking of getting a rack system this is the one to get and etrailer is the place to get it. This is a fabulous design. Strong and aerodynamic.
I purchased the Rhino legs, cross bars and J-style kaya carriers together and could not be more pleased with the combination. The system was installed in an evening and used the next day. Assembly and installation was easy. The most difficult part was getting an even extension from the legs on both sides of the vehicle. I put a vortex strip with the ruler in each side to adjust and then tightened the screws. This set the back part of the leg in place which made installing the strips on the bottom easy as well. With strips filling all the gaps in the cross bar there is no wind noise at all.
2020 Ford Edge with Vista Roof. Product arrived ahead of predicted delivery date. Very easy to assemble and directions were very easy to follow. Product is very high quality. I found 150mm front and 140mm rear to be the correct dimensions (I read a feedback that said they were not correct). No problems with Vista Roof, legs sit on the metal roof part not the glass. Overall very pleased with my purchase.
I like the sleek profile, and they look very strong too. The metal material is thick and doesn't seem like it will bend under normal conditions. They fit my 2016 XC90 nicely, with some overhang that I hope will allow me to fit a few different things on.
We just put up the rack on our Scion XB 2015. Super easy to install with instructions given from YouTube. We did a test drive through the town and on the freeway to see if there was any noise, nothing. So far so great. Package came in the time it said it would show up and just in time for our trip. I'd definitely buy through here again and another Rhino Rack if I needed I one.
My new Rhino Rack is great! Intalled it May 22 and I have done over 1250 miles of driving with my bike on the new rack! Very happy with this new rack.
These slick looking, quality made, aluminum, aero bars came with the RLCP25 kit, to fit my FJ Cruiser. It didn't have the big, bulky, useless for carrying much of anything factory rack.
I like the look of the full size racks/ baskets, but didn't want to spend $800 + truck freight to get one. These cross bars are perfect for carrying my 14' canoe, plus whatever else with various cargo carrying accessories.
They are light, yet combined carry near 100+ lbs. of gear.
There is a rubber strip in the top slot, bottom slots and plastic strips to seal those, once you slide the feet in the correct distance to be even on both sides for your vehicle, and black, plastic end caps to finish it off.
You'll need a tape measure and 10mm socket wrench to attach to the feet, then re-tighten periodically for safety.
They look great on mr ride, and I can deal with the rubbing/ humming sound, after putting them on, although it does sound like my tires rubbing the fender wells...
I followed all of the instructions and the rack system worked as I had hoped. I carried a large paddle board from Florida to the Fingerlakes in Upstate NY with no issues.
These were part of the 3 pieces I bought together for my 2018 Toyota Tacoma Access Cab. They are very strong--we put two sets of J-bars on them and carried two kayaks over 300 miles. There was virtually no wind noise, at least from the bars. A little from the kayaks, but that was expected. I'd highly recommend.
Great item, pretty easy to install. No issues with whistling during a 500 mile highway trip with two boats. Ironically, the only noise was from the Yakima Jaylow, when it was folded down with no boat attached.
I posted a longer review for the full setup on our 2019 Highlander with 2 biggish kayaks under reviews for the rack pillars, Item: RRRCL4. When fully tied down, we used hood loops front and rear for both boats.
Great service from Carol C.
I bought the Rhino-Rack for my 2014 KIA Soul "with a sun roof" and my wife and I installed it in about a half hour. it was soo easy and fits like it was manufactured just for my car. Everything I saw said that it was not for cars for the sun roofs but i measured and checked several friends before I ordered and bought and there looks to be no problems. It fits very well and the clearance is very sufficient. I can now carry my wood or kayaks or larger stuff around.
Installed on a 2013 Explorer. Went on perfectly with the SXB legs. Bars extend past the legs 3" for a very nice appearance. Silver bars/black feet on a silver Explorer is perfect.
Will likely use the bars to mount a cargo carrier on (16-18 CF) but haven't done it yet.
Just the most faint/slight whistle at 65 MPH. Can only be heard with no radio on. Absolutely no issue.
Solid as a rock.
Just got the roof racks in the mail yesterday. Super easy to install and it looks great on our Santa Fe! Can't wait to get the kayaks on top.
Also, this is the first time I've bought from etrailer and I will be recommending them to everyone. Customer service was amazing. Thank you!
I had a 99$ cheapo set of bars that had corroded and figured I would upgrade to these. These things are hot garbage. Every had a 4 year old that just learned to whistle, whistle in your ear for 6 hours? That's this. With my old cheapo bars + my thule XT rack iy didn't make a peep. Rhino-rack + thule XT and I've got a piccolo brigade on my roof. I'm truly disappointed in these bars.
Very surprised by the quality and features. Solid! Installation with includes rulers is a breeze. However, supplied mesurements were not exact for our Kia Soul 2015. But managed easily anyway.
This review covers the Rhino Rack 2500 Vortex Aero crossbars and associated parts (DK284, RRRLKVA, RRVA137S-2) for a naked roof installation on a 2018 Honda CR-V.
Very solid racks. We just took our first trip using them and the didn't budge. As recommended, a few days after installing, I tightened the bolts a bit. I'm not sure they needed it--just a little insurance.
The installation process was clear, but fairly detailed. It would be easy to miss a step, so take your time. Also, I tried a couple shortcuts in the order when installing on the car, but had to back track. So, go in the order they give you.
The racks easily supported our filled "pod" and a couple surfboards, strapped side-by-side. Sorry, no photos of the rack loaded. One thing to watch out for is that our old Thule pod almost didn't fit because of the thickness of the racks. I had to loosen the bolts almost entirely.
Of note: I feel that although I followed the measurements to the millimeter, the fit on our 2018 Honda CR-V wasn't exact. Where the pads sit on the roof of the car didn't align perfectly. I could have adjusted this by just re-trimming the rubber pads that go in the channels, but it's not a big deal, so I just left it.
Finally, I do have one concern. The angle of final installation doesn't really protect the racks from theft very well. The plastic plate that locks over the screw would allow someone with the proper tool to get up under it and loosen the bolts. That being said, someone so inclined could also just break the little plastic door or drill a hole in it to access the bolt. So, I guess it's just a deterrent anyway.
Overall, I'm very happy with the racks and etrailer.com! Despite shipping delays due to Covid-19, they were able to get the racks to me in time for an upcoming trip. I did choose to expedite shipping, but the cost was very reasonable.
Nothing special or “nice” about these. Rhino Rack stickers were already peeling and even if you want to peel them off completely they leave a bunch of residue.
etrailer has great customer service and all the products you need at a great price.
Awesome product. These were perfect for my 2014 Santa Fe XL. The bars are exactly what I was look for. I get very little wind noise from these even over 65mph.
best investment I ever made. Easy to install and they work great. Thanks
Same same.
Careful with the "Rino" p olitic
After having this product for a year, I can say we are very happy with it and would most certainly purchase again. We coupled this with the Rhino Rack J hooks to transport our kayak, and have used multiple times without issue. This system fit perfectly on my 2018 Atlas, which unfortunately was totaled, and I was able to transfer to my 2021 Atlas without issue. With the J hooks installed, you cannot open the sunroof on the Atlas, as there is not enough clearance, but once the J hooks are removed and only the crossbars installed, you can use without issue. Of note, you can still use the tilt function with the J hooks installed, just not fully open. I remove the J hooks when I am not transporting my kayak, so this is a non issue for me. Also worth adding, the customer service from etrailer is top notch; they reached out after my purchase to make sure everything was received as needed, and they are also the best priced, by far.
Looks good, installed fairly painlessly.
Used with the prescribed roof rack components. Drove 4,300 miles from AK to TX with no issues in the dead of winter through unforgiving Canadian wilderness. Rhino makes a good product.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.