To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Roof rack legs install to the raised factory side rails on your vehicle's roof. Compatible with many Rhino-Rack accessories.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Average Customer Rating: 4.8 out of 5 stars (199 Customer Reviews)
Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Roof rack legs install to the raised factory side rails on your vehicle's roof. Compatible with many Rhino-Rack accessories.Great product, excellent quality, great finish very sturdy and mounted to my Vortex bars perfectly.
Couple of cons but I'm not going to knock down the review because of it. Product came with instructions that are out of date for the new racks they are shipping. Platform also came with some missing hardware. Two missing nut retainers,two nuts,two screws and two washers. Was able to put it together with Hardware I had on hand..
Make sure and get the latest pdf installation manual from Rhino Rack's site!
Excellent platform. Excellent customer service.
The Rhino pioneer roof rack and vortex crossbars are going to work great on my Ram Truck with Retrax tonneau cover to help me carry extra gear. I also have the Yakama HD overhaul rack for carrying my kayaks. Everthing fits perfectly!
I called etrailer to verify fitment on my 2013 Ford E-350 XL. Everything arrived sooner than quoted, and instructions were clear. It took me approximately 6 hours to assemble by myself. I had 3 buddies over to put it on the van because it is ~100lbs and 100”x62”. We put towels on top of the van and slowly slid the fully assembled rack on top of the van. It took a while to level everything (30 mins?), but overall went on well and looks great.
The instructions didn’t clarify where the C-channel bars are supposed to be spaced to, but I used basic math skills and spaced each C-channel evenly spaced. It feels very strong. I believe it was 33mm on center for each C-Channel.
Looking forward to camping in a few weeks!
Fantastic rack, easily modified to accommodate tents/cargo/whatever. It's not quiet though, so do yourself a favor and get the faring.
Works great with my 2023 Toyota Sequoia and no wind noise . This was a better option then the oem trd roof rack.
Exactly as advertised! I love this rack. I have it on the top of my 2014 E350. No
Exactly what I needed for my Honda pioneer 1000-5. I can use it for a shooting platform when stopped in high grass or Swampy conditions during hog hunts.
This is a solid and versatile rack. Really well constructed. I bought mine wider than the vehicle for extra space. I found many generic options for attachment accessories. It's flat when I need it to be for airport parking garages. One year later, it's still awesome!
Purchased this about a month ago after having a mediocre cargo basket that started to rust after 2 weeks. This platform is not only more convenient and adaptable but it looks [really] great! Took some time to assemble but I made that every piece fit and lined up correctly. Nice finish and strongly constructed. I should have gotten this first! I also got the matching rail system to complete the set-up. Highly recommended. Shout out the the staff at etrailer for again for the great communication from start to finish!
I’m very satisfied with the level of service I received, from start to finish. Etrailer has mastered the customer experience to 2nd to none.
We bought the Pioneer Platform to go ontop of our Ford Excursion. I called to make sure that this was the model that came with the mounts that fit in the factory luggage rack rails. etrailer was super helpful over the phone. They had really good customer service. We put the Smittybilt Overlander XL rooftop tent on the platform. It all works great. I'd highly recommend etrailer to anyone everyone.
Loving my new Ford Bronco Sport Badlands model and the Pioneer Platform rack! With the Bronco Sport being so new, locating quality accessories was a bit of a challenge. I was excited to see Rhino Rack had the Pioneer Platform rack system I was looking for to start my build! Vicki at etrailer was super helpful in finding the parts, as listed on the Rhino Rack website, to make up the system. The etrailer site had not been updated to include the compatibility with the Pioneer System yet for the Bronco Sport. The parts were actually in stock and ready to ship! I’m giving the Rhino Rack Pioneer Platform 5 stars for ease of assembly and product quality. Assembly and install took about 3 hours, with several fore/aft adjustment to allow for complete operation and clearance for the Bronco Sports moonroof. This rack is the foundation for the complete “overland” conversion to come!
Overall, I like the rack. I use it for a hard shell RTT and it has held up well through several camping and off-roading trips. I chose this rack for the low profile look, weight and mounting system.
Just perfect, my shipment arrived in a couple of days. There was a hole in the box that may have occured during shipment that resulted in one of the slat being scratched, luckily I had black satin paint so I just soared over it so problem solved. Took me a while to assemble the platform as fherr were a lot of bolts and nuts to turn. But the end result is a nice sturdy platform rack that I will be putting to good use for my family’s upcoming adentures.
I did a lot of research before settling on this roof platform. I’m really happy with the build quality and once it’s all together it has a lot of strength and versatility. My ONLY complaint is that the “Quick Foot” mounting feet for the factory rail that was sent to me did not have matching key codes. The codes are clearly listed on the boxes and someone at etrailer.com didn’t bother to grab a matching set. Bummer.
After waiting for shipping and finally pulling it all out for the install I was too far into the project to ask for replacement feet. I just installed what was sent.
This platform rack perfect fit to my 2020 DURANGO GT. Easy assembly, easy installation and removal. I bought 2 years ago a trailer hitch receiver (code C13182) from your company and also satisfied with its use. I recommend ETRAILER.COM to all my friends. Thank you.
Excellent build and fit for the 2019 RAM Power Wagon WITH a sunroof. I would highly recommend using additional RTV to seal the holes. It barely clears the Sat antenna and the sunroof. The satellite radio cuts off easier because of the rack being on top of it. Instructions are clear enough for a DIY-type person to get this done properly.
The rack, just like any roof rack does introduce more wind noise at high speed.
Very nice platform that fit my needs. Costs a bit more than some others, but once it is put together it is very solid. I like the eco-system of tie-downs, mounts, etc. that you can get for it. Those accessories are what really makes it worth it. The flexibility of the channels makes mounting everything easy and quick. This rack doesn't come with the specific mounts for any vehicle, so make sure you look for whatever you need to attach it to your rack as well. Assembly took longer than I expected (about 3-4 hours, including mounting to my vehicle), with over 100 bolts to assemble. Comes with a nice torque wrench that helps a lot. Instructions were good overall, but pay attention to the screws for the corners, as they are mislabeled. Also, measuring guidelines painted on the side rails are nice, but they are not perfectly aligned on the left and right side. I found it easier to use a tape measure and pencil to make sure the cross supports were straight. While I didn't use them yet, this rack also has internal wiring channels enclosed in the perimeter frame that I could see being very useful.
Very nice rack. It holds well and not too noisy when on the highway. I did drill a couple holes in the rack to hold my roof top tent down. Also like how many accessories are available for the Pioneer Platform Rack.
Assembly was fairly easy and overall seems like a good product. I did have a couple of screws (2 of the Alloy Locking Tabs did not have the M6x20mm Security Head Screw (black) or associated washers) missing from the package but was still able to use as is. Hopefully I can have the screws and washers mailed to me.
Well I must say I am impressed--with the Rhino Rack and etrailer! This big ole Pioneer platform package arrived really quickly and was in perfect shape in and out--none of this already opened noise you hear about from sketchy vendors. The platform quality is also really good; I didn't expect it to be so good. I also really like how low it sits; they were obviously designing this to fit the Outback just right. I am a happy camper! Thanks etrailer for making this process worry/pain-free.
Rhino rack builds a great product. The armada backbone and pioneer platform are sturdy and fit well. Customer service and shipping from etrailer were flawless.
Fantastic experience! I spent weeks researching rack options for my GX460. At the end of my rope with literally NO good options, the good folks at etrailer talked me thru some great ideas and I went with the RhinoRack Universal Platform, attached to Yakima RailGrab Towers. My etrailer order was delivered within 48hrs and installed within another 12hrs. Great fit, great look. No rattles and surprisingly, no wind noise. I’ll be back for accessories! GREAT experience.
I bought this roof rack to mount on my 2018 Toyota TRD Off Road 4Runner. The reason I purchased it was because of the versatility that this product offers. There are many roof racks out there for my vehicle. Some are cheap and some are expensive. Some racks are smaller and some are full size. I was looking for a rack that wouldn't break the bank as well as cover a majority of the roof (without drilling). I have two young kids and I'd like to get them out more. Hence, buying the 4Runner as well as the rack. This rack will enable me to load a ton of stuff on it in the future such a roof top tent, awning, etc. Even though I'm somewhat handy, the installation did take around 3-4 hours. I did have one other person helping me. I highly recommend having an additional set of hands helping during the installation. The sides rail installation was easier than I thought it would be. The platform itself took longer to install. Overall: very happy with this product. I highly recommend it.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.