To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Aerodynamic, aluminum crossbar lets you build an aftermarket roof rack for your vehicle. Full-length bar provides plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Includes theft-deterring plastic locks.
Features:
Specs:
This low-profile, aerodynamic Vortex Aero crossbar lets you replace a damaged bar, add a third bar to an existing rack, or build a stylish aftermarket roof rack from scratch. The crossbar requires a pair of Rhino-Rack legs (manufactured in 2014 or later) and a custom fit kit to mount it to your roof. This bar extends past the roof rack legs to maximize the space for mounting carriers and accessories. Rubberized Vortex strips in the crossbar's top channel disrupt airflow for a quiet ride, and the bar is constructed of aluminum so it won't rust. The crossbar also includes Secure Core endcaps with plastic locks to help deter theft of channel-mounted accessories.
The rubberized Vortex strips in the top channel of this crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbar cuts through the air with minimal drag - even at highway speeds.
The Vortex Aero crossbar is made of structural-grade anodized aluminum with an H-shaped internal extrusion. This extrusion strengthens the bar without adding a significant amount of weight. And the aluminum bar won't rust so you can leave it on your roof year-round.
The crossbar has a channel in the bottom for mounting to Rhino-Rack roof rack legs (sold separately). Each end of the channel includes a rubber ruler to help you center the bar on your roof. Simply use the numbers and hash marks on the rulers to ensure the legs are spaced properly in the channel.
The Vortex Aero crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strip in the top channel comes in 3 pieces, so it's easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channel capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.
You can also attach most clamp-on accessories to the bar, and the Vortex strip provides a shock-absorbing, no-slip cushion for any accessories that rest on it.
The crossbar includes 2 Secure Core locking endcaps made of durable polypropylene. These endcaps lock with a universal tubular key. The polypropylene locks secure the endcaps to the crossbar and help to secure channel-mounted accessories to the crossbar. For maximum security, you can upgrade to endcaps with all-metal lock cores (RRVA-LEC2 - sold separately).
Average Customer Rating: 4.7 out of 5 stars (3380 Customer Reviews)
Aerodynamic, aluminum crossbar lets you build an aftermarket roof rack for your vehicle. Full-length bar provides plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Includes theft-deterring plastic locks.sturdy and relatively easy to install
I have a 2012 Camry hybrid and haul a 180 L windsurfing board. My rack came as promised but lacked one of the bolts needed. I made one phone call and the missing bolt was on my porch in 2 days.
There's virtually no wind noise, surprising since the car is very very quiet at baseline and I expected there to be some.
My car lacks tie down or towing attachments so I got some of the loop type that clamp under the hood and trunk.
I'm very pleased with construction, fit, ease of use, and customer support. I'd buy it again.
Great addition to the bed track of my 2022 Hyundai Santa Cruz! I got these for my rhino rack rod holder since they made such noise on the oem roof rack. So happy I went with rhino rack. You can't beat the price and the quality is as good if not better than Thule or Yakima. Highly reccomend.
Rhino rack does not stand behind their product. Beware had 3 broken and they won't replace the items. The end caps don't latch. Sent several pics per request for correction and the warranty dept just stopped responding.
Buyer beware, this is not a 1 off problem, the design is flawed. Cheap plastic is supposed to latch but just twist tight under the metal and after a half dozen or so adjustments the plastic is worn off.
Don't buy these.
I wanted to share the items I used to be able to haul two Wilderness Systems Tsunami 145 kayaks on my 2006 Scion xB. This may help others who struggle with deciding what to use. I am pleased with my purchase and hope this helps. I originally thought I wanted the Thule Hull-A-Port Aero, but they discontinued making the fit kit for their roof rack systems and I ended up going with the Kuats. I am glad that they didn’t make the fit kit for approximately $[XX] and so they missed out on the rest of my business. Here are the items I used for anyone interested – pictures included. Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof #DK138, Kuat Class 4 V2 Kayak Carrier w/ Tie-Downs - J-Style - Folding - 1 Kayak - Black #KU53VR and these are really cool, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 #RRRLKVA, Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 #RRVA137-B2. The 54” crossbars fit really well and the perfect length in my opinion and it doesn’t stick out like the longer ones would. Also purchased two sets of these Malone QuickLash T-Style Hood Loops for Bow and Stern Tie-Downs - Qty 2 #MPG308.
Durable looking product and has an easy install. On the roof of my van for the past year and still looking good. Holding out for 5 stars because I'm eating to see how it holds up in the desert sun after a few more years. Rhino-Rack is very hard to get information from regarding their products but etrailer had all the answers and gave me confidence with buying the product.
2020 Ford Edge with Vista Roof. Product arrived ahead of predicted delivery date. Very easy to assemble and directions were very easy to follow. Product is very high quality. I found 150mm front and 140mm rear to be the correct dimensions (I read a feedback that said they were not correct). No problems with Vista Roof, legs sit on the metal roof part not the glass. Overall very pleased with my purchase.
Great product and easy installation. Much better than the Thule factory racks that came with the leer truck topper rail system. Also like how they can unlatch! I hauled a fishing kayak and a Yakima rod coffin case all the way from Florida to North Dakota. Racks are strong.
I shopped online retailers namely Amazon and EBAY looking for the cross bar setup I would need for my 2012 Toyota Camry LE. My Camry has a naked roof. The whole experience was confusing. None of the needed components were combined together. I found each component listed separately but nothing to indicate they were the correct components for my car. Then ETRAILER.COM popped up in my search. I simply entered my car’s year, make, and model, and answered the question about the car roof (being naked with no factory installed cargo bars) and suddenly I had a list of the available cross bars for my vehicle with all the necessary components to install them. One or two clicks put the whole thing in my cart for purchase. ETRAILER .COM is your one stop shop. As a side note I purchased Yakima ski racks on sale to install on these cross bars. Another customer asked if these ski racks would fit his car and I explained yes they will with the appropriate cross bars. I sent him to “ETRAILER.COM” so he could get the correct setup. Pictures forthcoming.
These were more expensive than other Amazon racks, but the quality and aesthetics of the Rhino-Rack ROC25 justify the higher price. The website and customer service are excellent; their installation videos were perfect for installing the Rhino-Rack on my 2015 VW Jetta. One year later, they're still attached without issues and look great.
Hi George from etrailer,
The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack.
I highly recommend this etrailer.
My Thule UpRide Roof bike rack mounted perfect in the T-Slots! Mounts easily and no issues in the Truxedo T-Slot rails on my Ford Ranger. Mounts perfect in Truxedo T-Slot rails.
The rack is great. Well made with quality components, and compared to other brands, a very good value. I purchased the rack(s) to go on the top of a new Leer canopy with factory installed rails, supplied by Thule. The Rhine Rack cross bars are a great and less expensive alternative to other brands.
My only complaint is that the Thule rails/tracks require the removal of end caps and mounting bolts to install the crossbar mounts, and that requires breaking the watertight sealing installed at the factory. That’s not the fault of Rhino Rack. However, if they could develop a mounting system (ZwifLoc?) that did not require access to the track from an open end, it would be SO much better!
The selection process that etrailer uses is top-notch. This really helped narrow down the choices for my 2019 RAM Quad cab. I bought this all kitted together. The assembly process is very straightforward and well-documented. I would highly recommend etrailer as a source for vehicle accessories. I have Yakima bike racks on our Subaru and this is as good if not better.
Jeep wangler 2024 4xe with skyone touch top .Amazing the setup for my fishing kayak 12 feet. Everyone was looking at my setup on the road , and it was secure. Big thx to Kurt w & Paul B to recomand this kayak setup
10/10 www.Etrailer.
Indeed they were the wrong parts in the box marked demo on them.
The new parts came and I was able to
Put it on my car with no problem!!
Thank you for listening to me and helping me problem solve. It looks great on my car and I'm ready to load the kayaks now!!
Kalie is a gal that sent me some return labels so I'm going to put that on the box and send it back to you guys!
very solid rack, it's not going anywhere. Several fasteners to affix to truck cap. Clean look for the First Gen Tacoma (1999).
My roof rack arrived today and I installed the rails.
The product is sturdy, and attractive.
I am very pleased with the quality.
Installation Instructions are clear and precise.
The most important detail is to install the tracks parallel to each other and square to the roof
I recommend taking time to get this step correct.
I had another rack at one point but this rhino rack is far superior.
I would recommend it highly.
This is the second vehicle now that I've put the Rhino-Rack Aero Bar roof rack kit on. The instructions aren't too hard to follow with basic assembly knowledge and etrailer has a video tutorial for installation instruction which helped also. I didn't realize the allen wrench they provided also doubles as the security bolt bit you'll need when installing the brackets into the tracks so I just picked one up at the local hardware store. It's a great value for this product and I never had issues with my last kit and don't anticipate any with this one.
Measurements that were provided were wrong, but I contacted support and they helped me get the right fit! Good experience and great work support team! Bars are solid. Added threadlock blue for security.
While these seem very popular and generally well reviewed ( the reason I tried them) I cant see why, generally cheaply made molded parts with a just adequate fit. Most shocking were the pins that hold the towers and bars down to the base being plastic. Im sure Ill find some use for them but it wont be with my carbon fiber canoe on top, I just dont have the confidence in the connection. While they may be aerodynamic they are definitely not quiet on my installation. The locks can easily be defeated with a screwdriver. At this price I would look at other brands that might have a more positive and secure fit from bar to base. The service from etrailer was its usually quick and correct shipment and delivery though!
Not very difficult to install. It's a little intimidating drilling holes in the roof of my pick up truck cap, but it's only fiberglass and installed pretty easily. I've hauled a queen sized box spring, some extension ladders, and some kayaks with no issues. Very easy to remove cross bars when not needed, and not too difficult to reinstall when needed.
The Rhino-Rack aero bars were very easy to install, I was very careful to make sure that the rails were parallel so that I have multiple positions for the aero bars without having to adjust the towers. Also, I like the ease of removing the racks for the carwash.
The Rhino Rack looks great and very secure. I really like the option of the locking devise for security measure.
Tony G
Cedarburg WI
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.