Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2

See what our Experts say about this Rhino Rack Roof Rack

• Availability of Rhino Rack Tracks from Camper Shell Roof Rack Kit Y02-480B
  Hey Alex, it sounds like you are looking for just the tracks of the Rhino Rack camper shell roof rack kit # Y02-480B which we do offer with the part # RTC16.
  view full answer...
• Can I Fit the Rhino-Rack RTC Tracks # RTC16 on My 2022 Kia Telluride with Naked Roof?
  If you are looking for a permanent solution to mount to your 2022 Kia Telluride, the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long # RTC16 is a viable solution. We have had neighbors who report that these tracks do flex to fit the contours of their roofs/camper shells. With that factor, you should be fine with mounting the tracks to your 2-inch channel. Also, since the # RTC16 measures 2 inches wide, they will fit the width. To complete this system, I recommend the following...
  view full answer...
  
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Recommended Roof Rack Replacement System for a 2014 Toyota FJ Cruiser
  It looks like the picture came through, Jessica. From what I can see, it looks like the issue is with the OEM rails, which we aren't going to be able to fix. No matter which set of crossbars you choose, you're still going to have a pretty tall setup because the OEM rails are pretty tall. What you could do, is use a track system # RTC16 which would require you to remove your OEM bars. From here you'd need to add the landing pad # Y00221, towers # Y53TR, and bars # Y00425. This would...
  view full answer...
• Parts Needed to Install 84" x 49" Pioneer Platform Rack on a 2022 Ford F-450 Super Duty
  To install the 84"x49" Rhino-Rack Pioneer Platform Roof Tray # RR25TB on your 2022 Ford F-450 truck topper (since it will be too long to mount to the roof of your vehicle) you'll need the following: - Pioneer Platform Roof Tray # RR25TB - Quick Mount Legs # RRRLT600 AND # RRRLT600H - 63" Long RTC-Style Roof Rack Tracks # RTC16 This gives you a track for your truck topper, and then 3 pairs of Quick Mount Legs to give the extra long rack better stability.
  view full answer...
• Which Channel Nuts Should Be Used With The Rhino-Rack RTC Style Roof Rack Tracks?
  For your Rhino-Rack RTC-Style Roof Rack Tracks # RTC16, you will want to use the supplied 4 M10 channel nuts: -Replacement M10 Channel Nut for Rhino-Rack Accessories # RR89TB.
  view full answer...
• Would Thule Tracker Fit Kits Fit in Rhino Rack Track RTC15
  Although it's never been tested yes, the Thule Tracker Fit Kits would fit in the track part # RTC16 as the Thule also uses track nuts that are 3/4 inches wide like the Yakima towers.
  view full answer...
• 2015 Jeep Wrangler Roof Rack with Rhino Rack Vortex RLT600 for Rhino-Rack 2 Kayak Carrier
  The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 are designed to fit the tracks like # RTC16. Another popular option is to use the backbone roof mounting system for Jeep Wrangler hard tops # RRRJKB2 and rubber bases # RRQMFK06. Then you will simply use crossbars like the 59 inch # RRVA150B-2 to complete the roof rack. This complete system will allow you to use most roof accessories like the 2 Kayak Carrier # S512 and RRS512X....
  view full answer...
• Will the Rhino-Rack Roof Rack for Factory Tracks Work with Rhino-Rack RTC-Style Roof Rack Tracks
  Yes, the Rhino-Rack Roof Rack for Factory Tracks part # Y02-480B-NT works with the Rhino-Rack RTC-Style Roof Rack Tracks like part # RTC16 or any other length.
  view full answer...
• Can I Put Longer Crossbars On My Rhino Rack For Camper Shells
  Rhino Rack has tracks and 65" to 70" aero bars, but not together in combination. That means you would have to order the parts separately. However, there are a couple of things you need to be aware of if you want to carry boats that wide. The first thing is that the mounting channel, on the underside of the Vortex Aerobars, does not extend the entire length of the crossbar. It only extends 11-1/2" per side. This means your crossbars cannot extend more than 11-1/2" beyond the Rhino-Rack legs,...
  view full answer...
• Can the Rhino Rack RTC Tracks Be Mounted to the Bed Rails on a 2020 Ram 1500
  The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 will sit pretty much completely upright and will not really curve in towards the center of the bed, so I do suggest going with longer bars. The Rhino-Rack Vortex Aero Crossbars # RRVA180B-2 will measure 71 inches long and will be a much better option. Both of these paired with the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 # RTC16 will complete the set...
  view full answer...
• Rhino-Rack Track for 2018 Ford F-150 Camper Shell
  We have exactly what you're needing, Clayton! The Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-480B that fits your 2018 Ford F-150 can be broken down into the following parts: - 54" Vortex Crossbars # RRVA137B-2 - Quick Mount Legs # RRRLT600 - RTC-Style Roof Rack Tracks # RTC16 Since you already have the crossbars you will just need the Quick Mount Legs and RTC-Style Roof Rack Tracks to get this roof rack on your camper shell.
  view full answer...
• Rhino Roof Rack and Thule Canoe Carrier for Leer 180 Truck Shell
  I have a great solution for a Rhino Roof rack on your new Leer 180 shell and an attachment for hauling a canoe. I recommend the Rhino-Rack Aero Bar Roof Rack for Camper Shells item # Y02-480B. They have a weight capacity of 220 lbs, track length of 63" per side, and the cross bar dimensions are 54" long x 3-1/2" wide x 1-1/2" tall with a leg height of 3". The two RTC-style tracks with dual C-channels provide adjustable mounting points for your roof-rack legs. The tracks mount to your Leer...
  view full answer...
  
• Can Rhino-Rack RTC-Style Roof Rack Tracks be Cut to Length
  Yes, you can cut the Rhino-Rack RTC-style tracks to the needed length without voiding the warranty. The RTC-style tracks are available in a number of different lengths: - 71" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC18 - 63" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC16 - 55" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC14 - 31-1/2" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC8JW
  view full answer...
• Parts Needed for 71 inch Long Rhino Rack HD Roof Rack for Camper Shell
  If you wanted a similar Rhino Rack Camper Shell roof rack to the part # Y01-140B that has 71 inch long crossbars you'd need to piece the kit together with the part # RB1800B-2 for the crossbars, # RTC16 for the tracks on the roof, and then # RRRLT600 for the legs and you'd be set.
  view full answer...
• Rhino-Rack Track Mount System for Bed Rails of 2019 Chevy Silverado with Longer Crossbars
  Obtaining the Rhino-Rack Roof Rack System # Y02-500B with longer crossbars is just a matter of piecing out the system into its individual components. You will just need the Rhino-Rack RTC-Style Tracks # RTC16 that install on top of the bed rails, the Quick Mount Legs # RRRLT600, and the longer 71" Vortex Aero Crossbars # RRVA180B-2. This will give you the same exact system that you mentioned but with the longer crossbars to reach across the bed of your Silverado.
  view full answer...
• Does the Rhino-Rack Aero Bar Roof Rack for Camper Shells Come With Longer Bars
  In order to get the Rhino-Rack Aero Bar Roof Rack for Camper Shells with longer bars you'll need to purchase all the kit components separately but I have listed them for you below. Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars part # RRRLT600 Rhino-Rack Vortex Aero Crossbars part # RRVA165B-2 (65") or part # RRVA180B-2 (71") Please note, the channels under the crossbars that the feet mount in are only 11.8" long on each end...
  view full answer...
• Eye Bolts To Mount Directly To RTC Tracks
  Hello Trevor. There are eyebolts that are compatible with the RTC tracks. For that I suggest the Eyebolts for Rhino-Rack Vortex Crossbars # S604. These are designed to fit the T-track on a Rhino rack crossbar, but the T-bolts can be mounted to pretty much any T-track, including that on the RTC tracks.
  view full answer...
• Will the Rhino Rack RTC-Style Roof Rack Tracks fit on ATC Camper Shell?
  Congrats on your new truck purchase! If I'm understanding you correctly, you're asking whether or not your RhinoRack # RTC16 Roof rack is going to be compatible with both trucks- the answer depends on the length of the new truck's ATC camper shell. As long as you've got 63" to mount the tracks for the RTC system on your new camper shell, you'll be able to transfer it to the new truck without any issues. If you don't have quite that much space on your new camper shell, and can provide...
  view full answer...
• Attaching Rhino-Rack RTC-Style Roof Rack Tracks To Bed Rail Of 2019 Tacoma With A 5 Foot Bed
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 are meant to be mounted on the roof of a camper shell, but I see no reason why you couldn't mount them to the bed rails of your 2019 Toyota Tacoma. The only problem I see is that you have a 5 ft bed and the rails are 63 inches long. You will have to trim these tracks to match the length of your bed. In regards of the installation. It will come with all the hardware you need to install correctly. The only other part of the system that you...
  view full answer...
• Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
  The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
  view full answer...
• Will the Rhino Rack Tracks Work with Yakima Control Towers and What Is the Length of Mounting Bolts
  The 63 inch Rhino Rack RTC Style Roof Rack Tracks, # RTC16, come with 8 T-bolts for each track, 16 total, and each T-bolt measures 1 inch long. Although manufacturers typically do not recommend using another company's towers on their track, I went to our warehouse and pulled a set of the RT Style Rhino Roof Tracks and the Yakima Landing Pad1, #Y00221 to perform a test fit to ensure compatibility. All parts performed just as they should so yes, the Rhino Rack RTC Style Tracks will work...
  view full answer...
  
• Rhino Rack Track Compatibility With Thule Track Feet
  The Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount like # RTC16 will work with the Thule Tracker II feet. The Rhino-Rack Tracks are the same size as the Thule tracks.
  view full answer...
• Which Yakima Landing Pad Mount Kit Fits in Rhino Rack Roof Rack Channel like # RTC16
  Yes, we have test fit the Yakima Landing pad # Y00221 in a Rhino Rack channel like the part # RTC16 that you referenced and we found they fit perfectly. Since the RTV and RTC channel dimensions are the same that would mean that the Landing Pad fits both.
  view full answer...

Do you have a question about this Roof Rack?