bing tracking image
  1. Roof Rack
  2. Thule
  3. Fit Kits
  4. 4 Pack
Fit Kit for Thule Evo Clamp Roof Rack Feet - 5063

Fit Kit for Thule Evo Clamp Roof Rack Feet - 5063

Our Price: $149.95
You Save: $38.05
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 1.59 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos


Need help with installation?
Locate installers near me
These custom clips and pads let you mount Thule Evo Clamp feet on your vehicle with a naked roof. The rubber-coated steel clips are easy to install - just slide them into the feet until they click. Rubber pads help protect your roof from scratches. Lowest Prices for the best roof rack from Thule. Fit Kit for Thule Evo Clamp Roof Rack Feet - 5063 part number TH145063 can be ordered online at or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (10)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Thule Roof Rack

  • Fit Kits
  • 4 Pack
  • Thule

These custom clips and pads let you mount Thule Evo Clamp feet on your vehicle with a naked roof. The rubber-coated steel clips are easy to install - just slide them into the feet until they click. Rubber pads help protect your roof from scratches.


  • Custom-fit clips and pads let you mount Evo Clamp feet (sold separately) on your vehicle with a naked roof
  • Clips are quick and easy to install - simply click into place
    • Steel clips provide secure grip on your door jambs
    • Rubber coating protects door jambs from scratches and abrasions
    • Powder coated for durability and rust resistance
  • Molded rubber pads fit the contours of your roof
    • Clip onto bottoms of feet
    • Protect roof from scratches and abrasions


  • Quantity: 4 clips and 4 pads
  • Limited lifetime warranty

Secure, Click-In Installation

Thule Fit Kit Clamping to Vehicle

The fit kit clips are easy to install on Evo Clamp feet. Simply remove the lockable covers on the feet, then slide the clips into the clip retainers. The clips will click into place when properly installed.

Thule Fit Kit Single Attachment Point

To complete installation, place the fully assembled rack on your roof at the location specified in the fit kit manual. Tighten the rack in place with the torque tool included with the Evo Clamp. The single attachment point bolt lets you quickly secure the crossbars to the feet and the feet to your door jambs simultaneously. An audible click from the torque tool indicates the rack is secured properly.

Protection for Your Roof

Thule Fit Kit Rubber Pads

The rubber-coated steel clips and molded rubber pads protect your vehicle's paint from scratches and abrasions. The pads easily slide onto the bottom of each foot, and they are specifically designed to fit the shape and contour of your roof.

145063 Custom Base Clips and Pads for Thule Evo Clamp Roof Rack Towers - Qty 4

Item # TH145063

Installation Details TH145063 Installation instructions

Video of Fit Kit for Thule Evo Clamp Roof Rack Feet - 5063

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Thule SquareBar Crossbars Installation - 2020 Ford Ranger

Carla: Hey guys, Carla, here with Today we're going to be taking a look at the Thule Evo Wing Bar Roof Rack System on our 2020 Ford Ranger. So let's go ahead and tell you a little bit more about this roof rack. So with our Ranger in not being a full-sized truck, we are not really going to have a ton of bed space. So if you've got your car loaded up with people, you're ready to go, you may need some extra space. So this is where this comes in super handy.

You can put on here pretty much anything like a basket, a cargo box, even your bikes or kayaks on there. So one really nice thing about having aerodynamic bars is that it's going to cut down on your wind noise and it's also going to conserve some fuel.So one thing I want to show you is the T track that we've got right in the middle of our bar. It allows you to slide in an accessory right here. And as you can see, this rubber is going to hug it so you're not going to have a lot of noise or anything in here when you have it on. Now I did want to point out that we've got our hook here is rubberized.

So we're not going to have to worry about our paint. And I want to show you in here as well, you can see this pad, this rubber pad is going to prevent any scratches. So anything that's making contact with your vehicle is going to be rubberized just like this.So right here, as you can see, we've got a plastic lock that you can use to still lock your end cap so it doesn't fall off. So it is functional. However, I do recommend picking up a four-pack of the Thule One Key System so you can add extra security to your roof rack.

Also the bars are available in silver as well as in black.So I want to go over a couple of measurements for you guys. First off, from the top of our vehicle here, top of our roof to the bottom of the crossbar, it's going to give us about 3-1/2 inches. And then from the same spot from the roof to the top of the crossbar is right under four inches. So that's how much height it's going to add to your roof. One last measurement for you that you may be wondering about is if you put a box or a cargo carrier or anything up here in the middle portion of our crossbar, you may be wondering what about the antenna So if you can see right here, if I put this on top of it, you can see that it's going to clear anything on top of here.

It's going to clear the stationary portion of your antenna and from the rear of our crossbar here to the portion where we make contact, we're looking at about 19 inches. .One thing I want to mention is if you do have something that's going to go past that,. You can easily take this off by just unscrewing it from there.Now these bars, these arrow bars have a weight capacity of 220 pounds. However, you always want to check your owner's manual just to make sure that you're not exceeding what the manufacturer of the vehicle. So now that we know that, let's go ahead and show you how get them installed.So as you can see, I've got the parts laid out on the table for you. What I'm going to do is show you how to assemble it first. So what we're going to do is we're going to grab our foot and our rubber pad. And as you can see, it matches the shape over here. We're just going to go ahead and push it in to click it in place. You have to apply a little pressure on it. There we go. Next thing we're going to do is we're going to go ahead and wrap our rubber coated hooks and insert it right in here. So we're going to go ahead and insert it just like so until we hear a click, just like that. Now it's on there.The next thing I'm going to show you is I'm going to flip this over so you can see how this has an opening under here. One thing I want to point out to you, if you can see in here, there are two metal pieces that what we're going to do, we want to go ahead and push on those, grab on like this. When we push, this mechanism allows for this to slide right over your bar just like that. I wanted to show you guys right here for our Ranger, the number is number 44 on the measurement on this strip underneath. So that's the number we're going to use on both sides for a Ranger.So the last thing we want to do is put our end cap on just like this, click into place. We'll go ahead and put it on our roof. So what we're going to do is we're going to go ahead and try to set this on the other side first, make sure the hub grabs on to your door jam on the other side and then set it down just like that. So to get our rear bar installed, we are going to go based off the measurements of the crossbar spread here. To you get my front bar installed, what I had to do was measure 7-1/4 inches from the front edge of your windshield to right about right here where the edge of this footpad is. So the crossbar spread, we're going to measure right here from the front of the front crossbar to the front of the rear crossbar. We're going to need about 23-5/8, so I'm going to move this up a little bit. Measure again. We're almost there. Just a little bit more. We've got it right there. So with that in place, we're going to go ahead and do the other side.Now that we've got our bar in the right place, we're going to go ahead and use our included tool to start tightening this. And you want to alternate back and forth, just because these are going to get tight and move a little bit. So once we get it here to where this clamp isn't moving, and I'll show you on the other side here in just a little bit. Let's move on to the other side. So here's what I wanted you to see. We're going to insert our tool right in the middle here, hold on to our bar and start tightening. We want this clamp to have no play, but not over tighten it. So we're good. We're going to move on and keep alternating back and forth.So we've got our left side tightened all the way. I'll show you right here how to know when you are all the way done. So you can hear the clicks there and just give it a couple more. All right. So here we are with our end cap, we're going to go ahead and click it in place. I want to show you real quick. Right here is where you could get the optional locks to add extra security. This plastic piece would just come off and you can just insert your lock core right there.You can see I've got these all the way in tightened and this thing is not going anywhere. So we're ready to load up our accessories, like a kayak carrier or a basket. But that should do it for our look at the Thule Evo Roof Rack on our 2020 Ford Ranger.

Customer Satisfaction Score:

Customer Reviews

Fit Kit for Thule Evo Clamp Roof Rack Feet - 5063 - TH145063

Average Customer Rating:  4.7 out of 5 stars   (10 Customer Reviews)

These custom clips and pads let you mount Thule Evo Clamp feet on your vehicle with a naked roof. The rubber-coated steel clips are easy to install - just slide them into the feet until they click. Rubber pads help protect your roof from scratches.


Very thorough shopping e-commerce provided by vendor to help selecting the best options to fit my truck. However the Oder updates are a bit slow and due to the time lags between changes , confirmations are confusing.
Telephone assistant was great but took long time to resolve issues by the first respondent. The second one was much better.
Items needed to support the whole set up have to be doubled checked by myself otherwise one item was missed accidentally and the answer was vendor assumed buyer’s decision is correct.
Product delivered extremely fast once all issues are cleared, this is marvelous especially the shipping is free under this promotional period.
Installation is user friendly, spent about two hours and satisfactorily completed by myself.
All looks cool and good!!


These parts made good fit to the roof of my truck. I especially like the torque limited tightening design and tool.


Like the product, ordering was easy, and installation wasn’t to hard.


Looks good and confidently handles my k ayaks.


Fits 2021 just fine!






2019 Ford Ranger


See what our Experts say about this Thule Roof Rack

  • 2021 Ford Ranger Roof Rack Recommendation
    It looks like you're interested in the Thule WingBar Evo Roof rack in black. Because of the huge number of possible combinations, we don't kit the parts but I can tell you exactly what you'll need to provide a rack for your 2021 Ford Ranger. You'll need the following parts: • Thule 53 Inch WingBar Evo Crossbars in black, part # TH711420 • Thule Evo Clamp roof rack feet, part # TH710501 • Vehicle Specific fit kit, part # TH145063 The rack will look exactly as shown in the linked video.
    view full answer...
  • Which Thule Wingbar Evo Roof Rack Components Fit 2020 Ford Ranger with Naked Roof
    The correct Thule Wingbar Evo roof rack you need for your 2020 Ford Ranger with a naked roof is the part numbers # TH711420, # TH710501, and # TH145063.
    view full answer...
  • What Crossbar System Do You Recommend for My 2021 Ford Ranger with the Lowest Added Height?
    As far as a roof rack with the lowest added height that does not require drilling on your 2021 Ford Ranger with a bare roof, I recommend the following setup: - Thule WingBar Evo Crossbars - Aluminum - Black - 53" # TH711420 - Evo Clamp Feet for Thule Crossbars - Naked Roofs # TH710501 - Fit Kit for Thule Evo Clamp Roof Rack Feet - 5063 # TH145063 - (Optional for theft deterrence) Thule Same-Key Locks # TH450400 With this setup, you will have an added height of about 4 inches to the top...
    view full answer...
  • Do You Carry a Rhino-Rack Kayak Side Loader for a 2021 Ford Ranger?
    Yes, we do have a Rhino-Rack side loader. For that accessory, you need the Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading # RR-RUSL. In order to use the Universal Load Assist, you will need a crossbar system and a kayak carrier on your 2021 Ford Ranger (bare roof). For a great compatible crossbar system, I recommend the following parts: - Thule SquareBar Evo Crossbars - Steel - 53" # TH712400 - Evo Clamp Feet for Thule Crossbars - Naked Roofs # TH710501 - Fit Kit for...
    view full answer...
  • Ladder Rack Fit for 2019 Ford Ranger
    We have the perfect way for you to carry ladders with your 2019 Ford Ranger, although there is not a front-mounted hitch that fits this truck. There are ladder racks though which will work to carry your extension ladders as well as other gear. So long as your '19 Ranger is a 4-door Crew Cab with a 5'6" bed OR a 4-door Super Cab with a 6'6" bed there are two ladder rack options: - Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack # TH500XT (Silver) or # TH500XTB (Black) - Thule...
    view full answer...

Do you have a question about this Roof Rack?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Andrew K
Video by:
Andrew K
Employee Zach D
Video by:
Zach D
Employee Tyler C
Edited by:
Tyler C
Employee Colin H
Test Fit:
Colin H
Employee Randy B
Installed by:
Randy B
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Written by:
Matthew S

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.