To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This heavy duty Thule roof rack has lightweight yet strong aluminum crossbars so you can haul your gear. Each bar has three slots for mounting channel-mount accessories. Installs to fixed mounting points on your vehicle's roof.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Thule probar crossbars. And these are going to be a heavy duty aluminum bar that's going to allow you to build a sturdy roof rack system on the top of your vehicle. And the foot pack and fit kit are sold separately. And you'll need both to complete the roof rack system. You can use our roof guide here at etrailer.com to find the right parts for your specific vehicle. Now the probars are going to be unique in a couple of different ways.They're going to have that rugged versatility of Thule's square bar with a more aerodynamic shape kind of like the aero style bars.
It's also going to have an additional T track at the back to allow you to mount more accessories. So you can use this for things like an ihook or maybe some load stops. And then that top track could be used for your bike rack, kayak carrier, anything that has that T track mount. You'll notice at the top we do have some rubber stripping. That can be used in conjunction with our T track accessory.
You just cut this to length, put your accessory in place and then have the stripping go around it.This is going to take up any space there and also reduce any noise that could happen with that bar. The bottom track is going to be where we'll actually mount the foot pack. And it also comes with another length of weather stripping or rubber stripping to eliminate the gaps there so we don't have to worry about whistling at the bottom. That's going to be a narrower strip than the top one. So keep that in mind, the narrower strip goes on the bottom.Wide strip goes on the top.
Now of course we can still use this for clamp on accessories or anything that has a strap. The other nice thing about our pro bars is that they're going to come with an extra long design. That's going to allow you to carry more stuff, get more things out of the car and up on top of the roof. And it's also going to mean that you can mount things closer to the edge of the vehicle, which is nice whenever you're having to load up anything that's kind of heavy or a little bit awkward like a bike rack. And you're trying to load your bike up on there, it can get a little bit hairy.
Especially if you're the tallest person in the world.By having this further out it's going to make it a lot easier to get that bike installed or maybe put your kayak up there. It just makes life that little bit easier so you're not having to reach so far into the vehicle to get whatever it is up on top of the roof. One thing to note with that, the general rule whenever you're installing an overly long bar is that you don't want to exceed the width of your vehicle. You don't want to go further than your side marker mirrors. If you do, then you're considered a wide load and you have to go through other things like that.So you generally want to keep it within the width of your side mirrors. Another thing that can be a little bit of a drawback to having these longer style bars, sometimes if you forget that it's there, you go to get in or out of your car, you can kind of wack your head on it. Something to keep in mind. So it's going to have some advantages as far as getting accessories up and onto our vehicle. A couple disadvantages when it comes to how far out it's going to extend the width of our vehicle.These are going to be made of a sturdy extruded aluminum which is going to be very lightweight. But still durable enough that we can have good service from it and we don't have to worry about any rust again since it's aluminum. It's going to give you years of reliable service. So we're going to get our two cross bars, the rubber stripping for the top, rubber stripping for the bottom. As well as the end caps for both bars and the hardware to get those in place.It's just one bolt that goes in the bottom and then a little nut plate that actually goes in the T track. It also comes with a tool to get that tightened down. Now these are going to have a combined weight capacity of 220 pounds. So that's a lot of weight that you can put on top of your vehicle. You want to make sure that you don't exceed your roof's recommended weight limit. So definitely check your owner's manual. Make sure there's no limitations there. Now these bars are available in two different sizes. We're going to have 69 inches long and 79 inches long.Both of them are going to have a two inch width and a one and a half inch height. If you're working with something that has a strap and you're worried about the circumference of the bar, that's going to be six inches. So as long as your strap is greater than six inches, you should be good there. Thule is also going to stand behind their product by offering a limited lifetime warranty for the bars. And that's going to do it for our look at the Thule pro bar cross bars.
I'm using these Thule Evo Fixpoint Feet #710701 in conjunction with the FitKit #87003 to mount my DropRack XL to the rooftop of my 2021 Jeep Grand Cherokee. Eventually I'll get a Thule Rooftop Cargo Box to transport our RV camping supplies for which we don't have enough room in the Jeep or our Aliner RV camper. For now, I'm also using the setup to transport 4' x 8' plywood sheets for a DIY home project. This is the perfect solution for a multi-use application that'll enable us to accomplish more projects around the house as well as on the road.
After 1 year and several camping trips carrying 2 kayaks and towing a 5'er crossbars have performed wonderfully. Added the Thule Hullavator to help load the heavy Hobie. Great purchase.
Install was pretty straight forward. I did have to drill holes on the roof gutters for the fixed point bolts (2024 Mazda 3 5dr). Shipping was delayed by a month but it was not due to etrailers fault.
simple and secure; don't forget lock cy linders!
Got exactly what I needed! Perfect fit on the 2024 Q7.
I feel that the service I've received from e-trailer was superb. They made excellent suggestions and I'm looking forward to getting the new rack installed ... again, with their video help!!
Easy to install and hold crossbars very securely.
I would have appreciated being informed that the Thule Wingbars were not in stock!
Tule items are well engineered!
Product arrived quickly. Easy to install. Works as expected.
Great to replace a bent crossbar rather than buying a whole new set with the cost of feet included.
Great product. Super fast shipping and awesome communications throughout transaction. I would recommend.
Easy and quick to install, very durable too. 10/10!
Great!
Great service from Noah who helped me find what I needed.
Everything was Great
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.