bing tracking image
  1. Roof Rack
  2. Toyota
  3. Sienna
  4. 2004
  5. Malone
FITS 2004 Toyota Sienna
Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 58" Long

Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 58" Long

Item # MPG216
Our Price: $180.90
Roof Rack
Confirmed to Fit
2004 Toyota Sienna

All models

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 12 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Toyota roof rack experts, and offer a great price. etrailer.com carries a complete line of Malone products for your Toyota Sienna 2004. Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 58" Long part MPG216 from Malone can be ordered online at etrailer.com. Complete roof rack installation instructions and technical support.
  • All Info
  • Reviews (1122)
  • Q & A (0)
  • Photos
  • Why etrailer?

2004 Toyota Sienna - Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 58" Long

  • Complete Roof Systems
  • Aero Bars
  • Malone
  • Silver
  • Locks Included
  • Aluminum

This quiet, aerodynamic roof rack mounts to your Toyota Sienna with raised, factory side rails. Crossbars accommodate accessories that mount in the T-slots or clamp around the bars. Full-length aluminum crossbars maximize carrying capacity. Includes locks.


Features:

  • Aero-style roof rack lets you mount accessories on your vehicle with raised, factory side rails
  • Aerodynamic shape creates a quiet roof rack system
  • Full-length design maximizes space for carriers and accessories
  • Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
  • Rubber strips in T-slots reduce drag and wind noise
  • Safe and easy installation - rubber-coated steel clamps fit tightly around side rails
  • Locking tower covers secure roof rack to side rails
  • Lightweight, aluminum crossbars are rustproof
  • Plastic endcaps help keep water and debris out of bars
  • Durable nylon towers are weather resistant
  • Complete system includes 4 towers, 2 crossbars, installation tool and keys


Specs:

  • Rack weight capacity: 165 lbs
  • Minimum crossbar spread: 24"
  • Crossbar dimensions: 58" long x 3" wide x 1" tall
  • Weight: 13 lbs
  • Limited lifetime warranty


Malone AirFlow2 Roof Rack

The Malone AirFlow2 roof rack lets you carry gear and accessories on the roof of your vehicle with raised, factory side rails. This complete roof rack system includes 2 aluminum, aerodynamic crossbars and 4 towers. The full-length crossbars extend past the towers to give you more mounting space for carriers, and the towers have built-in locks to protect the rack from theft. The rack clamps onto your raised side rails and tightens down with the included tool, so it's easy to remove and install.


Aerodynamic Shape

Malone AirFlow2 Crossbar with Endcap

The AirFlow2's Aerodynamic shape helps control air flow over and under the bar to significantly decrease wind noise and vibration even at highway speeds. This decreases the need to add a fairing to your roof rack. The aero-style bar also reduces drag and helps maintain fuel efficiency.


Lightweight, Aluminum Crossbars

Malone AirFlow2 Crossbar with Endcap

The silver crossbars are made of aluminum, which makes them strong, lightweight, and resistant to corrosion. The bars also have plastic endcaps to protect the interiors from the elements and to give your roof rack a finished look.


Durable Towers with Built-In Security

Malone AirFlow2 Roof Rack Towers

The towers are made of molded nylon that won't fade or wear down when exposed to the elements. Each tower includes a nylon cover with a built-in lock to deter would-be thieves from removing the rack from your roof. The covers also protect the towers' interior and hardware from the elements.


Easy Installation with Rubber-Coated Steel Clamps

Malone AirFlow2 Roof Rack Installed

The towers attach to your vehicle's raised, factory side rails with rubber-coated steel clamps. The rubber coating provides a superior grip on your side rails and protects them from damage during installation and use.


Malone AirFlow2 Roof Rack Installation Tool

To tighten, simply turn the bolt inside the tower assembly with the included installation tool until the clamps are snug. Once assembled, the towers and crossbars stay together as one unit, which makes removing, storing, and reinstalling the system a snap. To remove, simply remove the cover and loosen the bolts inside the towers with the installation tool.


Channel and Clamp-On Accessories

Malone AirFlow2 Roof Rack Rubber Clamps

These crossbars have built-in top channels with strips that allow you to carry channel-mounted accessories on your roof. You can remove, trim, and re-insert the strips around the mounting hardware of your accessories to keep the crossbar channel capped and quiet.


Maximum Cargo Carrying Capacity

Malone AirFlow2 Roof Rack Full-Length Crossbars

The AirFlow2 includes full-length crossbars that extend past the towers. The increased length gives you more space to mount accessories and carriers to your roof rack. The bars are compatible with most universal, clamp-on accessories and carriers.




MPG216 Malone Air Flow 2 Universal Roof Rack for Elevated, Factory Side Rails - Aero Style Load Bars - 58" Long

Installation Details MPG216 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 58" Long - MPG216

Average Customer Rating:  4.6 out of 5 stars   (1122 Customer Reviews)

This quiet, aerodynamic roof rack mounts to your vehicle with raised, factory side rails. Crossbars accommodate accessories that mount in the T-slots or clamp around the bars. Full-length aluminum crossbars maximize carrying capacity. Includes locks.

by:

Love this set of cross bars-use them for kayaks and to hold my rooftop tent without any worries.also put my Thule xl car top carrier on with out any




by:
2015 ToyotaSienna

Works great on my 2015 Toyota Sienna LE! Have used it with a Yakima CBX cargo box for a few road trips.




by:

etrailer was great to work with. They are very responsive with emails and following up with tracking. I was little disappointed with the average ship time. It was almost like the product didn't get out the door until a week later, but I did get the product in working condition. As for the product quality the only complaint I had was the procedure/instructions for installing. I would totally recommend putting the rubber trim piece in the bottom of the rail during the first part of installation. Don't be afraid to slide that piece in the rail and cut it to size once it hits the end of the rail where it touches the mount. Its easy to cut and this piece is crucial to making the rails very quiet. I installed the first time without it and the wife hated me for installing these. We both looked at each other during the first drive test and said that whistle noise has to go! After installing the trim in the rail these rails were perfect for what I needed. It just needed a better instruction for installing it to top quality. I also recommend you put the trim in the first time because those side black pieces are plastic and they take a special kind of push in on the clip and pull to remove without breaking the clip. I broke my first clip but after that I was able to remove the other successfully. So because of the poor instructions and the removal of the rail to finish installing correctly I am now looking for a plastic end for one of my rails. Overall pretty good and durable. I also wish the instructions explained that when you tighten the mount that it also tightens on the rail too. Maybe I needed to watch a couple more videos about installing these before doing it.


Comments
I will have our Customer Service team reach out to you. I recommend watching the video installation that we have on a 2013 Ford Explorer. The end caps are available as a separate part. They are part # MPG1012
Replacement Endcaps for Malone AirFlow2 Roof Rack Crossbars - Qty 4
$22.52
-- Etrailer Expert Jenny N - 04/25/2022


by:
GMC Yukon

This roof rack is great. I also bought the canoe/boat attachment for this roof rack. I traveled in my GMC Yukon with a 16' canoe on this roof rack from Oregon to PA last Nov. It was windy through WY and the canoe was very stable. No problems during the entire trip. I would recommend this rack and the canoe attachment. The rack also has a locking feature that is nice.


Comments
The product is still working great. No problems. I am very happy with this purchase.
Linda - 12/04/2022


by:

I really like that these crossbars give you the option to mount your accessories on the track, but they are noisy. Also, They should be available in black.




by:
2007 Saturn Vue

The Roof rack is really good- very happy!
Had
it installed by the professionals and it works well!
It makes a whistling sound and I am looking for a solution:)


Comments
You mentioned that the rack is making a whistling sound and what I recommend is adding a fairing to the rack. For a 58-inch-long cross bar we have part # INA262
Inno Fairing for Roof Racks - 48" Long - Black
$91.96
available. It helps to move the wind up and over the roof rack therefor reducing the whistling effect.
-- Etrailer Expert Jenny N - 06/03/2022


by:

Good knock off of the Thule Evoloution Wingbar; I purchased it because it was about half the price of the Thule when you factor in the price of locks, mounts and bars. The Malone Airflow2 bars are installed on a 2016 Toyota Sienna, with a Thule Motion XT XL mounted on the crossbars. Happy that there is no whistling or other significant noise from the bars. They seem really sturdy. The lockable mounting clamps are just okay in quality. While I like that the locks come with the Malone clamps (Thule charges extra), and that the Malone clamps can fit a variety of rails, the rubber covers that are on the underside to protect your rails kept coming off during install as the clamps were tightened down. Had to carefully splay them out, and then tighten clamps slowly and double check frequently that the rubber was staying in place. The installation was not as easy as it should have been - - mainly because the 58" crossbars have about 6" of overhang past the edge of the mounting clamps, so you cannot use the hex wrench tool to continuously tighten the mounts. You have to pull out the wrench and reinsert it for a three quarter turn. The main problem with install was putting in the vinyl/rubber strips under the crossbars, which are solely for noise reduction. I could not accomplish this in the 35-40 degree weather, as the vinyl/rubber became too stiff. Heated them up with a hairdryer to make them more malleable, but after getting about 6 inches of the strips inserted, they would stiffen up again. Accordingly, I had to remove the crossbars and end caps, remove one side of the clamps and loosen the other clamp, and then remove the crossbars. Then I could slide the vinyl strips into the middle, and then had to reinsert the mounting clamps, and then remount to the van's rails. So, the installation took twice as long as it should have. Thule recommends a 53" bar for the Sienna, and since Malone only had the 50" or 58" bars, we went with the larger bars, so we could shift the cargo box to one side for easier access. Wish they made a 55" bar or would authorize cutting down the size of your bars without potentially voiding the warranty. But all in all, these are a really good bargain.




by:

Okay, etrailer seems to be okay so far.
Just installed the Malone airflow 2 and it took way to long. I had trouble getting the boots on the rail system. After trying one side then the other, it still took a while to loosen or tighten, trying both ways till they finally went on.
Bottom line, I had to work with it to long to get them on the rail system, but after I did! It seems okay. I honestly am not wanting to go through the hassle of taking them off and putting them on over and over. Cutting the rubber inserts for the bottom for wind noise may make that experience okay if it keeps the boots from moving when taking the rails off.
Also thought I had one the book break on me but it’s technically not broke. Here is a picture.


Comments
Thank you for your feedback. I reached out to Malone and the roof rack should be easy to take on and off. I will have our customer service team reach out to you.
-- Etrailer Expert Jenny N - 11/09/2021


by:

Very impressive hardware, instructions, and service at 1/2 to 1/3 the competition's cost. (Correction: there really IS no competition.) I tossed the rack onto my 2011 Honda Odyssey OEM roof rack without tightening anything to see how it all fits together, and was very pleased. I figured out how to fabricate a simple, elegant, low-profile, non-invasive, barely noticeable (it's my wife's minivan, after all) roller so I could easily slide my 12' kayak on top by myself. I planned exactly how to tie the kayak's nose and tail down securely without any mods to her van. I bought all the pieces and parts to do all the above, but before I got out my tools and mounted everything, I asked myself "Is there any way this kayak will fit securely inside the Honda with all the doors and windows closed?" The answer was, "Yes", so the rack is now gathering dust due to no fault of its own. It's inexpensive enough (try saying that about any of its "competition") that I'll keep it anyway in case I buy a longer kayak some day or need to mount the rack on some other vehicle.

When shopping for any related products now, I don't even look at any other brand or source. I now trust Malone and E-Trailer to provide the optimal combination of product, price, and service. I have no connection to Malone or ETrailer, and paid full price, but when a company or product performs this well, I want to help get the word out for everyone's benefit.




by:

The product worked as advertised. Easy to install, and look good on my vehicle. Works well with my rooftop basket.




by:
Volkswagen

As of now, with only instalation and 2 miles of travel with it on my car, it is doing a great job keeping my Sears cargo container on my VW Atlas. It looks good on my vehicle and was easy to install. It would be nice if there were measurement marks from the ends to help center the rack on my vehicle, but I just used some TLAR to gauge it. It uses a 5mm Allen wrench so I put a bit on my drill to make installation easier.




by:
2016 Mercedes-Benz Metris

The 58" Malone MPG216 bars replaced a set of 58" Malone Steel bars. The new bars feel sturdier and a definitely quieter. The fit and finish is great, except for one bar end that doesn't fit as tightly as it should. I put my Yakima Skybox 21 on top of them and they did the job. My only complaint is that they already have a slight bend after being loaded with just 140 lbs. I expected a bend to occur later in the year since the top box stays on for 6 months out of the year, but not after just one road trip. But, there was no movement from the bars or the box at all during the 1600 mile trip. So far, so good.


Comments
The Yakima skybox is about 70 lbs on its own. The weight capacity of the roof rack is 165 lbs. If you are putting 140 lbs worth of cargo in the box, plus the weight of the box itself on the bars that is 210 lbs. The bars will bend if they have 210 lbs of weight on them. Please make sure you are taking into account the weight of the box on the bars as well.
-- Etrailer Expert Heather A - 02/25/2019


by:

I bought this roof rack for my 2017 Honda Ridgeline with factory installed side rails, and am very pleased. The product has excellent features for the price. Features I wanted: aerodynamic profile for a quieter ride; locking towers for security; and built-in tightening tools for ease of installation. The fit and finish are excellent. Installation is very easy and can be done in a few minutes. I use mine for transporting a canoe and kayak.




by:
2012 Hyundai Tucson

Put this rack on a 2012 VW Touareg, then carried 12 pieces of 1" angle iron to Tucson from Oregon City. Rack installed easily and worked great.


Comments
Have used this rack for about a year now and very pleased. Has a slight whistle but is easily removed when not in use.
Dan - 12/03/2022


by:

Good value. I only plan to use very little and do not leave the racks on the vehicle all the time. They fit good on the factory rails and should provide a safe way to carry large items on the roof. Very satisfied with these racks.




by:

One year after for my Malone roof racks, still loving them. I have used them mostly with some Rhino Rack ski/snowboard racks all winter in the harsh Canadian cold. One I realized that I could use my cordless drill with a long allen wrench tip to speed up the process of installing and uninstalling these racks, they from a 5 star rating to, well couldn’t go any higher than it already was, but if I could, I would. [Just don’t overtighten.]. I have installed some gorilla tape over the black plastic end caps so they don’t fall out. Because I install and uninstall them often (about 12 times total in the year I’ve had them, they were a bit loose, but to be expected. With a little tape, they’re not going anywhere.




by:
Toyota RAV4

The rails look great, very easy to install (although I wish the hex key tool had a ball tip, I used my own wrench). I read other reviews about wind noise, I have none with or without the stripping underneath.
My only recommendation to others is to measure your width, the Rav4 is a little more narrow than my other vehicles. I went with the 58" so it would extend out past the vehicle. I'm often by myself loading the top, so it gives more rail to work with, making it less awkward trying to avoid contact to the vehicle.


Comments
After a year, this product still gets a 5 star. Easy install and good price. I did notice some wind noise with the sun roof open, otherwise quiet.
Jeffrey R - 06/23/2020


by:

I like them, they serve their purpose, however, they are very noisy at high rates of speeds. No matter which way I position them on the roof. Also, the end caps do not stay in position, I had to glue them to the ends.

Overall, doing what intended however


Comments
You mentioned that the roof rack is noisy at high speeds. What I recommend is adding on a fairing to the rack. The fairing helps to help direct the air flow over the rack to help eliminate or minimize wind noise. We have a Yakima fairing, part # Y05019
Yakima WindShield Fairing for Roof Racks - 52" Long
$138.95
, that would fit with the bar length that you have.
-- Etrailer Expert Jenny N - 11/18/2022


by:

I sent these back because I did not feel confident the crossbar feet would attach squarely to the Honda Ridgeline rails. Secondly, I did not like the fact that the feet did not attach to the crossbars without sliding around. they even slid off the bars when unpacking the box.




by:

TLDR;
Quiet bars, Truly easy install,
Really strong - just as good if not better than expensive competitors, one downside is easy to fix loose end caps.

We purchased the Malone AirFlow2 Roof Rack 58" aluminum cross for our 2018 Subaru Impreza and truly couldn't be happier. They are practically silent (when there's nothing on them) and look like they came with the car. The installation is so easy and despite being used heavily these past 9 months haven't failed in any way. I work construction and have used the bars to transport 2x's of up to 16' in length and with proper tie downs has felt secure and I haven't encountered any 'smiling' of the bars. Fun fact, I can stack 5 pallets on these bars without stressing about it. The only thing that isn't great is that with mounting and dismounting the 'caps' at the end of the bars often 'unclip' and regularly after unloading ill find them on the ground. Its not the worst thing ever but I imagine its just a matter of time before I lose them unless I secure them with sealant which could be a 2 minute fix. I use heavy duty ratchet straps and am sure to not 'compress' the bars into one another when securing objects and I haven't seen the bars shift on the car's rails in a meaningful way since initial install. As for car specifics, I like the extra wide bars on the impreza but I have occasionally hit my head on the edge of them, lol. For context my previous experience with roof racks was a nissan versa note where we used an old yakima clip system that often shifted and ultimately dented our roof :/ This Malone system for me just works the way it should.




by:

Excellent roof rack that has withstood a ton of abuse and has kept on functioning perfectly. I definitely recommend this product.




by:
2022 Subaru Outback Wagon

Love these Aero Crossbars! I received them on a day where I happened to have a super long day at work. I was so tired but when I saw them at my door, I was like, I need to install these. I did the installation in the dark with little light. They were super easy to install. They are strong, sturdy sharp looking.

I was wondering how they were going to be due to the costs. Hundreds of dollars cheaper than other brands I was considering. However, I have say I absolutely love them and they look great on my car. 5 star review hands down! I feel like I got a really great deal. If you are looking from some crossbars, I would absolutely recommend the Melon AirFlow 2.




by:

Very nice product. Fairly easy to install, but I had to have my wife help me. My only complaint is that there is a little noise when going over 50 mph.


Comments
I do have a solution for you. You may want to consider adding a fairing like part # RRRF4
Rhino-Rack Fairing for Roof Racks - 50" Long
$116.00
to the roof rack. It is designed to deflect the air flow up and over the bars in order to reduce wind noise.
-- Etrailer Expert Jenny N - 11/04/2021
Actually used it this past weekend to bring home 4 pressure treated boards. They were 2 x 6 x 12 pieces needed to finish a deck. These were heavy pieces of wood and we tied 2 to each side on top of where the rack attaches to the roof rail. From Lowes to home and over the US41 bridge on the Caloosahatchee river doing 40 mph max speed. All was well and the deck is now complete.
A.J. - 11/04/2022


by:
2017 Subaru Forester

I had to give it a four-star review because the package arrived open at both ends. Luckily all the materials were still inside the package And I was able to install the next day




by:

I order Malone Airflow2 Cross Bar. I received last May 11, 2022 The cross bar lools
sturdy, but upon checking the entire package The Bottom Rubber Strips is missing. The rubber strip is very important because it will reduce the noise when you’re driving. Should be putting an Excellent Rating for Etrailer, but missing a very important part of a cross bar is kinda sad and disappointing. Hoping they will send me the 2 missing rubber strips for my 58” malone airflow2.


Please and Thank you.


Comments
I will have our Customer Service team reach out to you.
-- Etrailer Expert Jenny N - 05/16/2022

25
1121
Show More Reviews

See what our Experts say about this Malone Roof Rack

  • Will the Thule Hull-A-Port Work on Malone Air Flow Cross Bars
    Great News! The Thule Hull-A-Port XT Kayak Carrier TH848 is 100 percent compatible with the Malone AirFlow2 Roof Rack systems like part # MPG216. The Hull-A-Port uses the clamps on the bottom which will grab a hold of the Malone bars for an excellent fit. There will be no need for an adapter for the two to work together.
    view full answer...
  • Will the Malone AirFlow2 Roof Rack Work With a Roofnest Sparrow Tent
    I took a look at the roof rack requirements for the Roofnest Sparrow and can confirm the Malone AirFlow2 Roof Rack part # MPG216 will work for you based on these requirements so long as your raised side rails allow you to position the crossbars at least 38" apart. This is a function of your 2019 Toyota RAV4 rather than the Malone AirFlow2 Roof Rack so if you do not have this you will need to look at other tents or vehicles.
    view full answer...
  • Will AirFlow Malone Roof Rack for 2019 Toyota RAV4 Be Quiet or Loud Compared to Factory Rack
    The Malone roof rack part # MPG216 which fits your 2019 Toyota RAV4 with the factory raised roof rails is going to be as quiet of a roof rack setup as you are going to find due to the aerodynamic shape of the bars. The factory Toyota bars would not be any quieter but would cost quite a bit. All crossbars add a bit of noise and mileage reduction, but the Malone bars would not be any worse than the factory bars in that regard. I attached an install video of the Malone rack on a similar...
    view full answer...
  • How Does Roof Rack Accessory Fit Into Top Channel of Malone Crossbar with Rubber Seal
    To fit roof accessories into the top channel of the Malone AirFlow2 crossbars like part # MPG216 you have to push down on the rubber strip to start the T-bolt into the top channel and the slide the nut down to where you want it. The rubber strip is there to help seal the channel so that it doesn't create a lot of noise at highway speeds.
    view full answer...
    Image 1 for
  • Will the Malone AirFlow2 Roof Rack Fit a 2019 Toyota RAV4 Adventure
    The Malone AirFlow2 Roof Rack part # MPG216 is a confirmed fit for your 2019 Toyota RAV4 Adventure and an excellent option at that. The AirFlow2 is easy to take on and off the vehicle, has locks for security, and the aero shaped bars cut down on wind noise. This system is easily the best bang for your buck and what I recommend for you and many others.
    view full answer...
  • Roof Rack Recommendation for 2019 Toyota RAV4 with Raised Roof Rails
    While we do have roof racks that are a confirmed fit for your 2019 Toyota RAV4 hybrid with raised roof rails the Yakima Railgrab racks were discontinued a while back so they were never tested on your vehicle. There's a chance it could work but we can't say for certain. We do have the Malone AirFlow2 rack part # MPG216 which is a confirmed fit and will work great. This is a very easy to install roof rack that gives you aero shaped bars which will minimize wind noise. Also the price is really...
    view full answer...
  • Can Crossbars be Added to 2016 GMC Denali With Raised Side Rails
    You can absolutely add crossbars to your 2016 GMC Acadia Denali with raised side rails. Since you already have crossbars I recommend going with a cost-effective but still quality option, the Malone AirFlow2 Roof Rack - Aero Crossbars # MPG216. These are aerodynamic bars to help ensure you have a quiet ride and come with locking towers that you can position wherever you like on your GMC's side rails which is going to allow you to use your rooftop cargo carrier!
    view full answer...
  • Is There Strip on Bottom of Malone Roof Rack to Help Prevent Wind Noise
    There isn't a lower channel cover for the Malone roof rack part # MPG216 that you referenced. There is a strip on the top of the bar designed to help prevent noise but there isn't a strip for the bottom of the bar. We haven't had any feedback yet that these bars are noisy and we have sold quite a bit of them.
    view full answer...
  • Installation of Malone Roof Rails # MPG216 for Maximum Crossbar Spread
    The Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 58" Long # MPG216 are able to be positioned anywhere along your factory side rails. They do have a recommended minimum of 27-1/2 inches spread to help disperse the weight, but there is not a maximum crossbar spread restriction. You can absolutely move them farther apart to carry something larger on your roof, you will just want to stay within the rated capacity of 165 lbs. As long as you are on the...
    view full answer...
  • Is Malone AirFlow2 Roof Rack Compatible with 897XT Hullavator on a 2018 Subaru Outback Wagon
    Yes, the 58" long Malone AirFlow2 Roof Rack # MPG216 can be used with the older version of the Thule Hullavator part TH897XT on your 2018 Subaru Outback Wagon. You just need to use the T-Track mounting system to do so.
    view full answer...
  • Recommended Roof Rack for 2020 Honda Odyssey
    I'd recommend going with the Malone AirFlow2, part # MPG216 to provide crossbars. The AirFlow 2 is an inexpensive option that's highly rated by our customers. I've also linked to install and demonstration videos.
    view full answer...
  • Length of Rola Sport REX Series Roof Rack 59685 and Alternative Option
    The Rola Sport REX Series Roof Rack for Factory Raised or Flush Side Rails - Silver # 59685 have a crossbar with a length of 60 inches, width of 3-1/8 inches, and height of 1 inch. You may want to also consider the Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 58" Long # MPG216.
    view full answer...
  • Will the Malone AirFlow2 Roof Rack Work On 2020 Subaru Outback With Swing-Out Crossbars
    The Malone AirFlow2 Roof Rack part # MPG216 is an excellent option for a 2020 Subaru Outback Wagon and will work on models with the swing-out crossbars. It has a 165 lb weight capacity which will be the max for options which attach to the swing-out crossbars so as long as you don't exceed this rating you will be fine.
    view full answer...
  • Best Cost Effective Roof Rack for 2020 Subaru Forester with Raised Side Rails
    We have great roof racks that fit the side rails of your 2020 Subaru Forester but none from Saris. The most cost effective and still high quality option is the Malone roof rack part # MPG216 which would attach to the raised rails of your vehicle and give you a quiet and easy to use roof rack. I attached a review video link for this rack on a similar 2019 Forester for you to check out as well.
    view full answer...
  • Roof Rack Recommendation for 2018 Subaru Outback Wagon
    For the value and quality you get it's hard to beat the Malone Air Flow roof rack that fits your 2018 Subaru Outback Wagon with the part # MPG216. With this rack you get a higher quality aero bar roof rack at a much better price than similar quality options.
    view full answer...
  • What Is The Crossbar Spread On The Malone Air Flow 2?
    The nice thing about the Malone AirFlow 2 # MPG216 is that you can make your crossbar spread whatever you want! as long as you have your raised side rails to clamp them onto. This is a great choice for your 2020 Subaru Outback and rooftop tent. Check out the video I've included of me using them!
    view full answer...
  • Can I use a Roof Top Tent with the Malone Airflow2 Roof Rack # MPG216 on 2019 Volkswagen Atlas?
    Yes, you can use your 165 lbs roof top tent with the Malone Airflow2 Roof Rack # MPG216 for use on your 2019 Volkswagen Atlas. You will be right at the weight capacity of the roof rack and your vehicle's roof weight rating (both are 165 lbs), however, so you won't be able to store any additional gear on the roof rack. Check out the video linked below for more details on this product.
    view full answer...
  • Is Installing Malone Roof Rack on 2019 Subaru Forester Difficult
    The install and removal of the Malone AirFlow2 Roof Rack part # MPG216 is really pretty easy. If you planned on removing them and installing them frequently you wouldn't have a problem at all. It would take just a couple minutes. If you check out the install video I attached you can see the rack installed on a similar 2015 Subaru Forester to yours.
    view full answer...
  • Roof Rack Recommendation for a 2002 BMW X5
    Yes we do, I attached a link to a page that has all of the roof racks confirmed to fit your 2002 BMW X5. The Rola 59829 that you referenced is not confirmed to fit your vehicle so I would not recommend it for you. For a roof rack similar to this one that would fit I would recommend the Malone AirFlow2 part # MPG216. I attached an install video for you to check out.
    view full answer...
  • Where to Mount Bow and Stern Straps on a 2008 Jeep Patriot for Carrying Kayaks
    On the back I would anchor to the hitch or the tow hooks underneath the vehicle. Up front, I would use the tow hooks welded or bolted to frame. Make sure you keep the straps away from anything that gets hot or moves as the straps could melt or be cut. You may have to consider longer cross bars, like part # MPG216, to accommodate all 4 kayaks.
    view full answer...
  • Recommended Roof Rack for a 2004 Chevy Astro
    I do have a roof rack that will work for you but we currently do not have a ladder rack available for your 2004 Chevy Astro at this time. For an aluminium roof rack that will allow you to carry an aluminum ladder on the roof of your Astro, I recommend the Malone AirFlow2 Roof Rack part # MPG216. As long as your Chevy Astro has factory raised side rails and your ladder does not exceed 165 lbs then these crossbars will work well for you. The crossbars will not require you to drill or bolt...
    view full answer...
  • Recommended Roof Rack for 2011 BMW X5 with Raised Factory Rails
    The Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 58" Long # MPG216 is a confirmed fit for your 2011 BMW X5. These crossbars and mounting towers will give you a minimum crossbar spread of 27-1/2 inches and a weight capacity of 165 lbs. You will want to check your owners manual to see if there are any further weight restrictions on your vehicle before use.
    view full answer...
  • Will Malone AirFlow2 Roof Rack Fit 2016 Toyota 4Runner SR5
    For your 4Runner the Malone AirFlow2 Roof Rack - 58" Long # MPG216 would be a great fit. This roof rack attaches to the raised side rails on the cab of your truck and includes locks to help secure it and prevent theft.
    view full answer...
  • Roof Rack Recommendation for 2006 Jeep Liberty with Raised Side Rails
    The load bar that you have is a specialty crossbar for a specific roof rack setup and the square load bars from Thule have been discontinued. I really can't recommend you use this bar with the components needed to complete a roof rack on your vehicle. Instead I would recommend you just get the part # MPG216 which comes with everything needed and is confirmed as a fit for the raised side rails of your 2006 Jeep Liberty.
    view full answer...


< Previous
123. . .19



Do you have a question about this Roof Rack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Test Fit:
Zack K
Employee Colin H
Test Fit:
Colin H
Employee Hayden R
Test Fit:
Hayden R
Employee Brent H
Test Fit:
Brent H
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Adam E
Test Fit:
Adam E
Employee Clayton O
Test Fit:
Clayton O
Employee Robert O
Test Fit:
Robert O
Employee Evangeline M
Test Fit:
Evangeline M
Employee Bradley B
Test Fit:
Bradley B
Employee Andrew K
Video by:
Andrew K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Robert C
Video by:
Robert C
Employee Jacob H
Video by:
Jacob H
Employee John S
Video by:
John S
Employee Thomas T
Video by:
Thomas T
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Daron K
Edited by:
Daron K
Employee Jonathan S
Written by:
Jonathan S
Employee Alex H
Updated by:
Alex H
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924