Straight-tongue coupler is made of sturdy steel and has a durable, rust-resistant primed finish. Composite eZ-Latch ensures fast, easy, secure hookup and disconnect. Welds onto your 3" wide trailer tongue.
Features:
Specs:
This coupler features a simple-to-use latching mechanism known as the eZ-Latch. With this mechanism, hooking up is as easy as dropping the coupler over your trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have to be secured in place. Just make sure that the coupler is properly lined up with the ball when you lower it, and the rest is automatic. Disengaging the coupler is just as effortless. Simply lift up the handle and the coupler socket will automatically release its grip on the ball.
The contoured, low-profile design of the latch handle helps protect the coupler from damage by allowing any potential hazards - from debris on the road to your ball mount backing into the coupler - to simply slide over the top. This helps prevent anything from getting under the latch handle and releasing the ball, and it can also limit any damage to the coupler should an impact occur.
Unlike most couplers, which have a pin hole through the handle latch, the eZ-Latch coupler features a hole through the side of the coupler itself. Inserting a coupler lock through this hole will keep the latch from lifting, preventing disconnect and theft.
Sturdy, Corrosion-Resistant Construction
Made of sturdy steel, this straight-tongue coupler features a durable red primed paint finish that is designed to limit rust and corrosion and allows for easy welding. The eZ-Latch's sleek, ergonomically designed handle is constructed of a durable composite material that's corrosion-proof, allowing it to withstand whatever the road and the elements dish out.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Demco Easy Latch Channel Tongue Trailer Coupler for a two-inch diameter ball. It has a 10,000 pound weight capacity. Now this channel tongue coupler will let you hook up your trailer and your tow vehicle. It provides the connection point for your two-inch hitch ball. This one is unique because it uses this nice easy latch coupler mechanism which ensures simple, secure hookup and disconnect. Basically it'll even let you hook up when the latch is in the closed position, like it is now.
All you have to do is just drop the coupler over the hitch ball and the latch will snap into place. I just wanted to demonstrate that. I happened to pull . here's a two-inch diameter hitch ball. So you can see when you put the coupler on there, and when you push down with weight, it'll automatically lock into place and you're ready to go.And then to remove it, just pull all the way up on the easy latch and it removes very easily.
Now this latch itself is a corrosion proof polymer nylon resin composite, which will very durable and impact resistant. The coupler itself is a sturdy steel construction. You can see it has a nice red paint primer finish on it, and it is a weld on installation. This part is made in the USA. Again, the ball size it fits over is a two-inch diameter ball, weight capacity is 10,000 pounds, and the channel width that this'll fit on if you measure inside the inside is right at three inches.Also one last thing I do want to mention, if you look at the very front here by the latch, you'll see this hole that goes all the way through for security.
It's a pin hole for a coupler lock to allow you to install a lock on this and lock it. Basically it'll keep your unattended trailer from being taken, and even if the trailer is connected to your vehicle, it will keep somebody from removing it from your vehicle. The diameter of this lock pin hole is 5/16 of an inch. So when you do buy a coupler lock, you want to make sure that pin is 5/16 of an inch. And the minimum span that is needed on the lock is going to be two and a half inches.
But that should do it for the review on the Demco Easy Latch Channel Tongue Trailer Coupler for a two-inch ball, and it has a 10,000 pound weight capacity.
Average Customer Rating: 4.0 out of 5 stars (1 Customer Reviews)
Straight-tongue coupler is made of sturdy steel and has a durable, rust-resistant primed finish. Composite eZ-Latch ensures fast, easy, secure hookup and disconnect. Welds onto your 3" wide trailer tongue.Seems well built, but didn’t get my entire shipping, half of it fell out of the box it was shipped in, at 26 pounds, it should of been packaged a lot better.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.