Straight-tongue coupler is made of sturdy steel with a zinc powder coat finish with a 200-hour salt spray rating. eZ-Latch ensures fast, easy, secure hookup and disconnect. Designed to bolt onto your 3" wide trailer tongue. 5-Hole bolt-on case.
Features:
Specs:
This coupler features a simple-to-use latching mechanism known as the eZ-Latch. With this mechanism, hooking up is as easy as dropping the coupler over your trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have to be secured in place. Just make sure that the coupler is properly lined up with the ball when you lower it, and the rest is automatic. Disengaging the coupler is just as effortless. Simply lift up the handle and the coupler socket will automatically release its grip on the ball.
The contoured, low-profile design of the latch handle helps protect the coupler from damage by allowing any potential hazards - from debris on the road to your ball mount backing into the coupler - to simply slide over the top. This helps prevent anything from getting under the latch handle and releasing the ball, and it can also limit any damage to the coupler should an impact occur.
Unlike most couplers, which have a pin hole through the handle latch, the eZ-Latch coupler features a hole through the side of the coupler itself. Inserting a coupler lock through this hole will keep the latch from lifting, preventing disconnect and theft.
Sturdy, Corrosion-Resistant Construction
Made of sturdy steel, this coupler features a durable zinc coating that has a 200-hour salt spray rating, which is designed to limit rust and corrosion. The eZ-Latch's sleek, ergonomically designed handle is constructed of a durable composite material that's corrosion-proof, allowing it to withstand whatever the road and the elements dish out.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there. I'm Michael with etrailer.com. Today we're going to take a quick look at the Demco Channel Tongue Trailer Coupler. This is going to mount onto your trailer and it's going to provide that connection point for your hitch ball, which will allow you to hook your trailer up to your tow vehicle. One of the nice things about this coupler, what's going to set it apart from some of the others out there, is the easy latch mechanism. It's going to make it very easy to get hooked up to your ball.
We've got a ball here to demonstrate.So unlike other couplers, where you have to pull back on a pin or something to get it to mount in place, this you just simply line it up, and when you put the pressure down on it, it's going to lock in there. And then to release it, simply pull up on that and lift it off. It's going to be very easy to use as you're not going to have to worry about trying to look up there to see if it's open or unlatched. It's going to be very easy to get hooked up.This is very heavy duty steel, and it's got a zinc plating on it that's going to help resist corrosion. It's tested for 200 hours of salt spray, so it's going to hold up very well for you.
It's going to do a good job. It is a bolt-on applications, so you're not going to have to weld anything, however that hardware is not included, so you will need to get some of those bolts to get this hooked onto your trailer.It's going to fit ball size 2 and 5/16 of an inch. It's got a total weight capacity of 21,000 pounds. As far as our mounting side here, this is going to be a three inch wide opening for your three inch wide channel tongue. This is made here in the USA, and it does come with a one year warranty from Demco, so you can trust they're standing behind their product.
It's going to do a good job, allow you to get hooked up to your tow vehicle so you can pull that trailer. That's going to complete our look at the Demco Channel Tongue Trailer Coupler.
Average Customer Rating: 4.9 out of 5 stars (7 Customer Reviews)
Straight-tongue coupler is made of sturdy steel with a zinc powder coat finish with a 200-hour salt spray rating. eZ-Latch ensures fast, easy, secure hookup and disconnect. Designed to bolt onto your 3" wide trailer tongue. 5-Hole bolt-on case.Worked great bolted right on just took a few more days to get shipped than was first told but I will shop again
Very quick service and very easy to work with. Thank you
Ot mounted yet byt looks great
Nice heavy duty hitch.All of the holes lined up perfectly,installed in 2 minutes. Highly recommended. Roger
The part fits on my 3" wide frame, the bolt holes line p perfectly and it is very good quality - extremely heavy. Plus, shipping and delivery were very quick.
Do you have a question about this Straight Tongue Trailer Coupler?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.