In-stock alternatives that can ship today
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today were going to take a quick look at the Titan weld on Coupler for two and five sixteenth balls part number t1755000. This is a weld on coupler designed to be used with trailers that have three inch wide tongues. Well take a measurement here of the inside width and well get our three inches. The coupler has an overall length of about nine and half inches. Its finished in a gray primer so you can come back and paint it whatever color youd like to match your trailer. It has a gross trailer weight capacity of 21,000 pounds.
The latch system is a little bit different than on many other trailer couplers. Theres a safety release here that youll have to pull up in order to open the latch. To close it all you have to do is pull it forward. You do want to make sure that the safety is set properly. When the safety is down in place in the slot the latch cant come open until you pull this.
You can also use a coupler lock here to secure it and prevent the safety release from coming up that way youre guaranteed that the trailer cant come uncoupled while youre pulling it down the road or you can prevent theft while its in storage. Now well show you how the system works from underneath. Inside the ball socket area theres a piece of tubular metal here that fits around the back of the ball. Well pull our safety release and open the lever and you can see that piece of metal move back and out of the way. As we pull the latch forward it drops back down into place.
Now weve got a two and five sixteenth ball with us so well show you how it works with the ball. With that piece of steel there we cant get the ball in. Well open the latch and our ball fits into the socket. Now well close the latch and that piece of metal moves forward and fits around the backside of the ball. Now our balls secured and it allows travel for smooth towing behind the vehicle.
Thats it for a quick look at the Titan weld on Coupler for two and five sixteenth balls part number t1755000.
Average Customer Rating: 4.6 out of 5 stars (30 Customer Reviews)
Exact fit for replacement on equipment hauling trailer. Heavy-duty. Holding up and operating fine.
This coupler does what it's supposed to do and is stout. But it's finicky hitching up. If there is any back pressure at all, it will not seat. Sometimes I'll need to drive in reverse and hit the brakes hard to get it to fully seat so I can put the pin in.
I have three other trailers with different coupler types that all function smoothly. This is the only one that can be a pain.
Andrewt - 04/24/2021It was supposed to fit on a 3 inch tube. But the inside dimention was about 3 5/16"
Jenny N - 01/06/2022the operation of the latch is good, the fit to the tongue is a little loose, mine req'd clamping, hammering and filling the gap with a few passes of 7018, it was about .25 large (better than too small). Unit looks superior to the bulldog units i have on other trailers (they seem to stiffen up after a few years in the weather).
It was a perfect addition to my trailer. It strengthened the connector and gave me peace of mind.
Jim M - 09/26/2017Very Loose fit (almost 1/4") with standard 3"heavy wall tubing.Adds extra time to install. Locking latch opens nice, but closing it is unnecessarily difficult (flawed design). compared to my 25yr old Atwood. I don't regret purchasing this item. Although these are issues that buyers should be aware of.
Hitch was perfect and the shipping was very quick. I am very happy with the service from etrailer. This was my first purchase form this company, and I will try to use them in the future.
Excellent quality, made in USA & delivered fast- great service- I'll work through etrailer again!
The latch binds up having to use a bar to get it to open
Tongue coupler works good. Solid metal. Very strong
It is what I thought it would be, a trailer coupler
Good quality and better then the old worn and cracked one that was on there
Perfect fit and just as described on the website. Very quick delivery too.
Great company to work with!! Very responsive and helpful!! Thank you for the GREAT customer service!!!
It has worked since we installed it.
The product was what I wanted. It will work to replace a damaged one. thank you.
The coupler is very well built and was easy to weld to the 3" tubing I am using.
Great product and super fast delivery. Thanks again!
should work just fine. Great company to work with.
very happy with the coupler ,good fast sevice
fast delivery very good shipper
Fast service
Hitch was just what I needed and was shipped extremely fast.
Do you have a question about this Straight Tongue Trailer Coupler?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.