bing tracking image
  1. Straight Tongue Trailer Coupler
  2. Fulton
  3. 2 Inch Ball Coupler
  4. 3 Inch Channel
  5. Standard Coupler
  6. Bolt-On
Fulton Fas-Lok Coupler - 2" Ball - 3" Channel - 6,000 lbs

Fulton Fas-Lok Coupler - 2" Ball - 3" Channel - 6,000 lbs

Item # F346000301
lowest price pledge
Retail:$89.19
Our Price: $66.88
You Save: 25%
Straight Tongue Trailer Coupler
Orders above $99 qualify for Free Shipping
Shipping Weight: 5 lbs
Quantity: 
In Stock
F346000301 - Bolt-On Fulton Straight Tongue Trailer Coupler
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
The popular and efficient, trigger-style latch on this corrosion-resistant, straight-tongue coupler helps to make hookup quick, easy and secure. Lowest Prices for the best straight tongue trailer coupler from Fulton. Fulton Fas-Lok Coupler - 2" Ball - 3" Channel - 6,000 lbs part number F346000301 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (284)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Fulton Straight Tongue Trailer Coupler - F346000301

  • 2 Inch Ball Coupler
  • 3 Inch Channel
  • Standard Coupler
  • Bolt-On
  • 6000 lbs GTW
  • Trigger Latch
  • Fulton

The popular and efficient, trigger-style latch on this corrosion-resistant, straight-tongue coupler helps to make hookup quick, easy and secure.


Features:

  • Channel-tongue coupler is sturdy and simple to use
  • Fas-Lok trigger-style latch makes for quick and easy trailer hookup
  • Z-Max 600 finish offers superior corrosion resistance


Specs:

  • Ball size: 2"
  • Channel: 3" wide
  • Distance between side mounting holes: 3"
  • Capacity: 6,000 lbs


346000301 Fulton Standard Series Straight Tongue Stamped Coupler, 2" Ball, 3" Coupler, 6,000 lbs, Fas-Lok Coupler




California residents: click here


Video of Fulton Fas-Lok Coupler - 2" Ball - 3" Channel - 6,000 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Fulton Straight Tongue Trailer Coupler - Standard Coupler - F346000301 Review

Today, we're going to review part number F346000301, the Fulton Fas-Lok Coupler with a Cast Ball Clamp, fits a 2" hitch ball and will fit on a 3" channel. This coupler is a trigger latch style. This is a bolt on coupler. It has a Z-Max 600 finish, which offers superior corrosion resistance. It is designed to fit a 2" hitch ball. And do couple measurements, measures 3", so it will fit a 3" channel.

Another measurement will be the distance between the side-mounting holes on the side. We go from center-to-center, it is 3". This coupler does have a weight capacity of 6,000 pounds. And that should do it for part number F346000301, the Fulton Fas-Lok Coupler with the Cast Ball Clamp to fit a 2" hitch ball on a 3" channel.


Customer Reviews

Fulton Fas-Lok Coupler - 2" Ball - 3" Channel - 6,000 lbs - F346000301

Average Customer Rating:  4.8 out of 5 stars   (284 Customer Reviews)

The popular and efficient, trigger-style latch on this corrosion-resistant, straight-tongue coupler helps to make hookup quick, easy and secure.

- F346000301
by:

Etrailer... I have purchased a few items thru your page and have always been pleased with the products I get from you but most of all how fast you have always shipped out even during this covid time. Hitch came out of the box and had it bolted on in less than 15 minuts. Thanks


Comments
Perfect
Mark P - 07/05/2021

Comments
Good
Mark P - 10/22/2021


- F346000301
by:

My old firewood trailer became uncoupled from my truck. I needed a quality replacement so I chose this one. I haven't installed it yet but it looks to be high quality.



- F346000301
by:

One year review with consistent every day use. Still looks and functions as new,I regularly disconnect and reconnect the next day and ive never had even the slightest problem getting the lock to go down and lock in place. Truly a great product.



- F346000301
by:

Excellent product with great well-built quality. Just what I needed. Besides, the customer service at eTrailer is second to none - in fact it far exceeds 95% of the companies I deal with.


Comments
Its working great, although I did notice a bit of rust starting to form. I plan to put something on it to stop the rust and protect it from further rust. Just surface rust so far.
Mike S - 11/28/2016

Sounds like a great plan, thanks for the follow up.

-- Etrailer Expert Rachael H - 11/30/2016


- F346000301
by:

etrailer has the best product selection and customer service. I recieved my entire order well in advance of the expected arrival date. The quality of the product is excellent. The Fulton Fast-Lok coupler is heavy duty and very secure. Way better than what came with my 14x7 V Nose trailer. The Super Extra long ball mount solved my problems to get the ball lined up on my Jeep Liberty with the spare tire thats mounted on the rear door. I could not find anything suitalble locally, so etrailer met my needs 100%.



- F346000301
by:

Good product Withstands elements really well No rust forming around moving parts. Still easy to fasten and open. I recommend it highly if you need one



- F346000301
by:

Used this product to replace one that is about 8 years old and rusted. Product appears to be heavy duty. Time will tell how well this China product holds up. The one I had was USA made, but, then again it eventually succumbed to rust. I happy with what I received and customer service was excellent, as always.


Comments
Excellent product.Looks like it did, the day I got it.No rust anywhere.Thanks for checking.
Charles P - 07/09/2015



- F346000301
by:

Great ordering experience. Easy on line site. Intuitive. Very informative (videos etc). Product arrived as advertised. Sturdy. Good quality. No issues.



- F346000301
by:

Well built. Fit was perfect. Performed well



- F346000301
by:

Great product. Exactly as advertised. Arrived early. Fit was perfect, a five minute install. I have several orders with etrailer, never disappoints.



- F346000301
by:

Great product, fast delivery ,good price. I now have confidence in my new trailer hitch. Original product that came on my new boat trailer was low quality and UNSAFE!



- F346000301
by:

Went on in seconds.. Very happy with this site. They were very fast to ship and kept me updated the whole time on when my product will be in.. Cant wait to use etrailer again



- F346000301
by:

Fit my trailer perfectly and it took only minutes to install.



- F346000301
by:

Operates as expected. Tongue states that it requires four 1/2 inch bolts to achieve load rating...



- F346000301
by:

Great product. Could not find this locally. Fast shipping.



- F346000301
by:

The product is just what it says it is. But, I'd really like to rave about the service. The coupler shipped the same day it was ordered and they upgraded the promised delivery time. Way to go etrailer.com!!



- F346000301
by:

Replaced original part on snowmobile trailer. This part is thicker, have no problems opening latch in cold, snow, ice. Solid unit.



- F346000301
by:

I was looking for a Coupler to replace the one on ageing trailer. My Boat is a little of 5k In weight this product fit what I needed and it was extremely easy to install. I chose this one because it is rated over 5,000 lbs. Also etrailer hit it out of the park easy to order and delivered ahead of schedule. I will buy from these guys again .



- F346000301
by:

Great prices, quality products and fast shipping...


Comments
Working great!!!
Doo1000 - 11/08/2015



- F346000301
by:

Great product! received it very promptly and was the cheapest price I could find. This is a one stop shop for all your trailer needs.



- F346000301
by:

I haven't put may tires and coupler on may trailer as yet.but I am very pleased with them. Very satisfied with how fast I received them.great job etrailer.



- F346000301
by:

I used it on a Dr Trimmer log splitter tow bar. I had to redrill the holes on the bar, but it works great.



- F346000301
by:

Delivery and goods as promised- on time! Thanks etrailer.



- F346000301
by:

Coupler arrived quickly and was exactly what I was looking for. Price, especially with free shipping, was good.



- F346000301
by:

Outstanding service and quality they have what i need and got it in 3 days WoW a true company with integrity and best products


26
287
Show More Reviews

Ask the Experts about this Fulton Straight Tongue Trailer Coupler



  • What is the Maximum Tounge Weight Capacity of the Fulton Fast-Lok Coupler - 6,000 lbs
    Trailer couplers are not rated for tongue weight capacity. They are rated for Gross trailer weight, as long as the gross trailer weight is within the capacity of the coupler, the coupler is installed properly and the trailer is designed properly, the coupler will handle the tongue weight of the trailer. Proper installation of the coupler is the key to it handling the weight it is rated for and the manufacturers directions should be followed explicitly.
    view full answer...
  • Can Fulton Fast-Lok Coupler, # F346000301 Be used on a Majic Tilt Aluminum Trailer
    An aluminum trailer does not necessarily require a specific amount of bolts for the coupler. But the coupler will require a certain number of bolts. You old heavier surge coupler was probably a lot longer and needed 3 bolts. The Fulton Fast-Lok Coupler, # F346000301, is smaller and only needs 2 bolts. The third hole should be capped or plugged or even run a bolt through it to help keep out moisture and road grime. I recommend that you get a coupler that has the same bolt hole size and...
    view full answer...
  • What Mounting Hardware is Needed to Bolt on Fulton Fast-Lock Coupler # F346000301
    The Fulton Fast-Lok Coupler # F346000301 that you referenced does not come with mounting hardware. My technical contact at Fulton informed me that more likely than not these couplers are welded so sending hardware is not necessary. I will e-mail you separately the bolt on directions, however this coupler uses the Class III bolting instructions which are as follows: 1: Assure couplers internal stop is butted against end of trailer tongue for maximum overlap 2: Use four (4) 1/2 inch...
    view full answer...
  • Replace Trailer Surge Coupler with Straight Coupler on a Trailer With Surge Brakes
    All of that is not necessary. All you have to do is lock out the surge coupler so it cannot move in and out or disconnect the brake lines. By removing the old coupler you would have to remove the brake lines any way. A surge coupler can still be used in this manner. If you do a lot of towing though I would still use brakes. By removing the trailer brakes you are putting more stress on the tow vehicle brakes and will have to replace them more often. But if you want to go with a straight...
    view full answer...
  • Can Trailer Coupler Latch be Replaced with Coupler Installed on Trailer Tongue
    If you have a coupler such as the Fulton Fast-Lok Coupler # F346000301 or something similar then there is access to the fasteners that hold the latch to the rest of the coupler from underneath. Remove the nut from underneath and take note of how all the parts go together. Reverse the order when ready to reassemble the latch.
    view full answer...
    Image 1 for
  • Adjusting Latch On Trailer Coupler with Trigger Latch
    To adjust the hitch latch on your trailer's coupler, you will want to adjust the nut at the bottom of the latch. This nut will be tightened or loosened depending on what you need for your coupler. I have attached a diagram showing you the location of the nut that you will want to adjust. The ball needs to be secured in the coupler and unable to simply come off. However, there should be some room for play. The hitch ball needs to be able to move inside the coupler so that nothing binds...
    view full answer...
    Image 1 for
  • Can the Fulton Fast-Lok Coupler F346000301 be Welded On
    Yes, if you wanted to weld the # F346000301 to your trailer you could. Since this has a corrosion resistant coating you would want to do this in a very well-ventilated area though.
    view full answer...
  • Mounting Hole Spacing for Fulton Fast-Lok Coupler F346000301
    I went to our warehouse to measure the mounting hole spacing on Fulton Fast-Lok Coupler # F346000301 and found that the distance from the top surface of the coupler housing down to the center of the side mounting holes is 1-inch. This and other dimensions are noted on the photo I prepared for you.
    view full answer...
    Image 1 for
  • Would Loose Coupler Bolt Cause Coupler to Disconnect from Hitch Ball
    Even if the coupler was barely attached to the trailer the latch system would still hold the hitch ball assuming everything is working properly. The reason your hitch ball became separated from the coupler is due to the latch and not the loose coupler bolt. It's' definitely time for a new coupler!
    view full answer...
  • What Would Prevent Fulton Coupler # F346000301 From Fitting on Hitch Ball
    Is it possible you are using the wrong size hitch ball? When the trigger latch of the # F346000301 is fully opened it should easily fit over a 2 inch ball. But if the ball on your trailer is 2-5/16 inch in diameter then it's not ever going to fit.
    view full answer...
  • Trailer Coupler Trigger Latch Position and Ensuring Correct Fit
    The Fulton Fas-Lok Coupler - 2" Ball - 3" Channel - 6,000 lbs # F346000301 will not be under the ball all the way to the hitch ball shank but it will be on the under side of center. It is possible for a latch to be installed incorrectly and not hold the ball while the trigger latches. I recommend checking it to make sure it is installed correctly and that you can't physically lift the trailer off the ball while latched. The wear on the ball should be above center from the tongue weight...
    view full answer...
  • Straight Tongue Coupler Mounting Hole Locations To Ensure Vertical and Horizonal Alignment
    The Fulton Fas-Lok Coupler - 2" Ball - 3" Channel - 6,000 lbs # F346000301 you referenced has a 2 inch ball and fits a 3 inch channel. The holes are measured on center at 3 inches apart. The holes will be 1 inch on center from the top and are 1/2 inch diameter. The length from the end to the front of the channel will be right at 5 inches. This is my recommendation for you.
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Trailer Coupler for 3 inch Wide Channel that Has 3 inch Mounting Hole Dimension
    The Fulton Coupler part # F346000301 that you referenced is a high quality coupler and also covers everything you need as it fits the 3 inch wide channel and has mounting holes that are 3 inches apart on center.
    view full answer...
  • Replacing Surge Coupler with Standard Coupler on Boat Trailer
    Actually, if the latching portion of the coupler still works correctly, you can simply engage the manual lockout lever on your coupler which will prevent the coupler from compressing and trying to apply the brakes, allowing you to continue using your existing coupler. If you really want to replace the existing surge coupler, the Fulton # F346000301 would fit your 3 inch wide trailer tongue. The mounting holes are 3 inches apart on center, if that doesn't match the existing holes in your...
    view full answer...
    Image 1 for
  • Comparison Between Fulton 5K And 6K Fast-Lok Coupler
    The difference between the Fulton Fas-Lok Coupler with a 5,000 lb capacity, part # F343000301 and the 6,000 lb weight capacity coupler part # F346000301 is just that. The weight capacity. Both are a bolt-on installation, designed for 3 inch channel trailers, have trigger latches, and work with a 2 inch ball. The mounting holes are spaced 3 inches apart and both have the Z-Max 600 finish that helps resist corrosion. While the F346000301 coupler is rated at a higher capacity, it sounds...
    view full answer...
  • Why Would Trailer Coupler Latch Cut into Hitch Ball
    Sounds like the latch of your Fulton Fast-Lok Coupler # F346000301 is either adjusted too tight and/or is damaged. The nut you see on the bottom of the latch, try loosing it slightly to see if it end up putting less stress on the ball. You will want to test fit a 2 inch hitch ball in this coupler to make sure it is tight enough to be secure but not too tight.
    view full answer...
  • Using 6000 lb Rated Coupler for 3500 lb Boat and Trailer
    As long as the tongue on your trailer is 3 inches wide, the Fulton Fast-Lok coupler will work fine for you. There is nothing wrong with a little overkill. Keep in mind that the higher weight rating of coupler will not increase the weight rating of your trailer, as any towing system is only as strong as its lowest rated component.
    view full answer...
  • Replacing an Actuating Coupler on a Magic Tilt Boat Trailer with a Standard Straight Tongue Coupler
    We have many standard straight tongue couplers that will fit your 3 inch x 4 inch trailer tongue. I have attached a link to all of our straight tongue couplers for you to check out. You can simply select the weight capacity that you need and the hitch ball size to choose the correct coupler. One coupler you may be interested in is the Fulton Fast-Lok Coupler, # F346000301. This coupler uses a 2 inch hitch ball, has a 6,000 lb weight capacity and will fit on your 3 inch wide tongue. It...
    view full answer...
  • Lock Recommendation to Fit Trigger Latch of Fulton Coupler
    For the Fulton Fast-Lok Coupler # F346000301 you referenced you would want the Master Lock Trigger Style Coupler Lock # 605DAT. Check out the picture I attached that shows it locking tightly to the trigger of a coupler. The pin diameter is 1/4 inch and is 11/16 inches long.
    view full answer...
    Image 1 for
  • Can Surge Brake Actuator be Converted to Fixed Coupler for Electric Over Hydraulic Application
    It is actually pretty common for people to put some bolts through a surge brake actuator like what you have so that they can have a standard coupler. This would be the best solution for you aside from replacing the coupler entirely so you can use your HydraStar Electric Over Hydraulic Actuator for Disc Brakes # HBA16. The one thing you need to look out for when doing this is making sure that your hardware is strong enough so that you don't have to worry about it breaking while you're towing.
    view full answer...
    Image 1 for
  • Fulton Straight Coupler Installation and Torque Specifications
    Thanks for the pictures. Torque specs on couplers, like the Fulton Fas-Lok Coupler item # F346000301, are changed all the time by the manufacturers. It doesn't look like you damaged the coupler by torqueing it to 55 lbs. I recommend keeping the bolts at 55 lbs and not trying to go back to 35 lbs.
    view full answer...
    Image 1 for Image 2 for
  • Recommendations for Replacing an Atwood Trailer Brake Actuating Coupler
    You would want to replace an actuating coupler with another actuating coupler. The Fulton coupler, # F346000301 is a standard coupler so you would not have any brakes when using this coupler. I recommend the Titan, # T2480000. This coupler does not have an electric reverse lockout so you would either need free backing breaks or a separate lockout like # T4748800 that will need to be connected to the reverse light circuit on the vehicle. No more getting out of the truck or levers to pull....
    view full answer...
  • Are Trailer Coupler Mounting Holes The Same And Is A Brake Controller Needed For Electric Brakes
    The standard, basic straight tongue coupler I have that will fit a 3 inch channel, and a 2 inch ball with a 6,000 lbs. weight capacity is the Fulton Fast-Lok Coupler with Cast Ball Clamp, 2 Inch Ball, 3 Inch Channel - 6,000 lbs, part # F346000301. It has the 3 inch spread between the side mounting holes. As long as the tongue has not been modified the distance from the front of the channel to the first hole will be the same on all of the bolt-on couplers. When your trailer has electric...
    view full answer...
  • Coupler Recommendation for 12k Boat Trailer with 3 inch Wide Frame and 2-5/16 inch Hitch Ball
    We have the Decmco Channel Coupler part # DM13203-95 which would work well for a bolt on option. This fits 3 inch wide channel, is designed to fit a 2-5/16 inch ball like you have and has an 18k capacity. For a similar weld-on coupler we have the part # DM12662-97 which comes primed for paint as well. Either would be a great solution for use with the Hydrastar part # HBA16 you are planning on installing.
    view full answer...


< Previous
12



Do you have a question about this Straight Tongue Trailer Coupler?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality straight tongue trailer coupler for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate straight tongue trailer coupler information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.