TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster - 6 Flow Through Tire Sensors

TireMinder TPMS Sensor - TM98FR

TPMS individually monitors the tire pressure and temperature of your RV's tires. The monitor can store data for up to 4 vehicles. The flow through design lets you inflate tires without removing sensors from valve stems.

Features:

• TPMS lets you monitor your RV's tire pressure and temperature with the included monitor
  • Works with your motorhome, 5th wheel, motor coach, or trailer
• 6 Flow through sensors let you monitor each tire individually
  • Allows tires to be inflated or deflated without removing sensors
  • Check the tire pressure and temperature every 6 seconds
  • Can be used on steel, chrome, or nickel valve stems
• Easy-to-use LCD monitor provides you with visual and audible alerts for up to 10 tires at once
  • Warns you of changes with tire pressure, tire temperature, sensor and monitor batteries, and sensor signal
  • Enables you to set tire pressure and temperature settings
  • Lets you monitor up to 20 sensors - additional sensors sold separately (TM66FR)
  • Can store pressure and temperature information for up to 4 vehicles, or 40 tires
  • Includes 12-volt, micro USB charger
• Repeater extends the signal between the sensors the monitor
• Simple installation
  • Sensors are secured onto the tire's vale stems
  • Magnetic monitor holder mounts to the windshield or dashboard using a suction cup
  • Repeater installs onto the exterior of your RV or trailer
  • 12 Batteries, 6 locking nuts, 6 O-rings, and a wrench are included

Specs:

• Tire sensors:
  • Pressure range: 0 psi - 199 psi
  • Operating temperature range: -4 degrees F to 185 degrees F (-20 degrees C to 85 degrees C)
  • Battery voltage: 3V DC
  • Battery life: 9 to 14 months
  • Accuracy: ±1 percent
• Monitor:
  • Overall dimensions (not including antenna): 3-1/2" wide x 3/4" deep x 4" tall
  • Screen dimensions: 5-1/4" diagonally
• Repeater:
  • Overall dimensions: 2-3/4" wide x 1-1/8" deep x 1-3/4" tall
  • Wire length: 6' 7-1/4"
  • Wire configuration:
    • Black: ground
    • Red: power
• Monitoring capacity with included sensors: 6 tires
• 3-Year warranty

Note: Do not use with rubber valve stems.

While on the road, it is very important to regularly maintain your tires and make sure they're inflated correctly. If your tires are underinflated or overinflated, they'll develop irregular tread wear and become prone to overheating and blowing out. The TireMinder i10 TPMS helps protect your investment and keep your family safe by monitoring your tires and alerting you of any signs of danger before disaster strikes.

6 Flow Through Sensors

This TPMS includes 6 flow through sensors that let you individually monitor each tire on your application for changes in pressure and temperature. The flow through design allows you to inflate or deflate your tires without having to remove the sensors. These brass sensors are able to work on steel, chrome, or nickel valve stems. Every 6 seconds, they will check the pressure and temperature again.

Simple Setup with Color LCD Monitor

The color LCD monitor will provide you with visual and audible cues to warn you of dangerous changes in tire pressure and temperature, as well as alert you of changes with the monitor battery, sensor battery, and sensor signal. Before you begin setup, make sure the monitor has been charged and the repeater and sensor batteries have been installed.

Select your RV or trailer configuration or the locations of the tires you want to monitor. Then select one tire location, install a sensor on the corresponding tire on your RV or trailer, and the current PSI will automatically appear on the screen. With the purchase of additional sensors (TM66FR - sold separately), you can monitor up to 20 tires, which is perfect for a fleet. This system can display up to 10 tires at a time, alternating between the tires of the "front" or drivable application and the tires of the "rear" or towable application. Sensors can be added, moved, deleted, or replaced at any point, even after initial installation.

You can set the tire pressure in psi, Bar, and KPa. If you choose psi, you can set the tire pressure anywhere from 0 psi to 199 psi. As for the temperature, you're able to switch between degrees F and degrees C, and the system will alert you if the temperature exceeds 167 degrees F. With the app, you are also able to disconnect and reconnect to different vehicles, RVs, or trailers. This is useful for those who switch between different applications, such as a Class A motorhome who sometimes tows a car. It also can store pressure and temperature information for up to 4 vehicles, or 40 tires.

Bluetooth Repeater Boosts Signal

This Bluetooth repeater helps improve signal strength and range of the sensors, especially for longer RVs, trailers, and other applications. It ensures that the link from the sensors to the monitor is strong and continuous.

Easy Installation

This TPMS system includes 8 batteries, 4 locking nuts, 4 O-rings, and a wrench. Once the batteries have been inserted and covers have been re-installed, remove the cap of your valve stems, thread the locking nuts onto the valve stems, and install the sensors. Lastly, secure the locknuts against the sensors with the wrench.

The weatherproof and dustproof Bluetooth repeater can be installed anywhere on the exterior of your RV or trailer between the rear axle and king pin. The optimal mounting location for a towable camper is toward the front whereas the optimal mounting location for a drivable RV is toward the rear. it is not recommended to install the repeater inside your vehicle, as you might experience signal blockage. Use either the adhesive (included) or hardware (not included) to attach the repeater and wire it to a power supply line. In order to reduce vibration, make sure it's securely mounted. Then connect the black wire to ground, and the red wire to power.

TM22164 TireMinder RV Tire Pressure Monitoring System - 6 Flow Through Transmitters

Model number: TPMS-i10-6FT