Brophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs
(111 reviews)
Price: $9.35
In Stock
Brophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs
Item # LRB1
Retail:$13.60
Our Price: $9.35
You Save: 31%
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (111)
- Q & A (0)
- Photos
- Why etrailer?
Brophy Tie Down Anchors - LRB1
- D-Ring
- Tie-Down Cleats and Rings
- Surface Mount - Bolt-On
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- 4000 lbs
- Brophy
This durable steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The zinc-plated ring resists corrosion and bolts onto a flat surface. Includes mounting bracket.
Features:
- Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords
- Surface-mount design does not require you to cut a hole in your trailer or truck bed
- D-ring rotates 180-degrees so you can attach straps from multiple angles
- Zinc-plated steel construction resists corrosion and retains its strength through repeated use
- Simple, bolt-on installation to flat surface
- Mounting hardware not included
Specs:
- Maximum load (break strength): 11,700 lbs
- Working load limit: 4,000 lbs
- Ring diameter: 1/2"
- Internal ring dimensions: 2-3/8" wide x 2-1/2" tall
- Dimensions: 3-1/2" wide x 3-3/8" tall
- 1-Year limited warranty
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
LRB1 Brophy Zinc Plated Lashing Ring Tie Down - Bolt On - Surface Mount - 4,000 Pounds
Customer Reviews
Brophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs - LRB1
Average Customer Rating: 4.9 out of 5 stars (111 Customer Reviews)
This durable steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The zinc-plated ring resists corrosion and bolts onto a flat surface. Includes mounting bracket.by: Chris F. 08/22/2017
The pictures of these don't do them justice. They are larger than they look on the website. I'm using 4 of these to secure my Jeep to my trailer. I would have given 5 stars but there seems to be a dimensional issue if you use 3/8" carriage bolts. The bolts cannot seat fully into the square hole because the hole is to close to the curved portion that holds the d-ring in place. This doesn't affect the function but does hurt the appearance of the finished product.
by: Dixon, S.09/23/2017
Easy to install, never rusted, never broke with multiple trips of tying down cars and light pickup trucks. Great bang for buck!
by: Everett 10/25/2021
Great for easy safety chain hookup on my 5x12 trailer.
by: Melvin 07/17/2021
Excellent product. I was half expecting something smaller...i'm glad it wasn't! The brackets were mounted to the sides of my car trailer deck, which allowed for extra tie down points.
by: Adam 06/22/2021
Nice addition to my trailer to haul my SxS. My trailer didn’t come with any tie down points. Another bonus with these is adding tie down points exactly where you want them on the trailer that works best for your application.
by: Steve T10/07/2013
Great quality. Install 6 on my 5x10 utility trailer with a wood deck. Used 3/8 x 2 1/2 inch Carriage bolts.
Comments
Steve, I have the same application 6x10 wood floor. Where did you mount these beauties, on the outside of the frame rails? Or did you go thru the floor into the angle pieces holding the floor?No experience in this, just dont want my 49 Allis Chalmers to fall off!Thanx Bruce Bower
-- comment by: Steve T - 10/16/2013Going to the siderails can make securing a car more challenging than it needs to be. Going to the deck of the trailer would be easier. Check out part RR5K. It will make the install a little bit cleaner as they tie-down points are recessed. The backing plate is included too for use with wood decks, and it even has a 5K working load limit.
--
Patrick B - 10/18/2013by: Bruce02/23/2022
Great Product. Worked as intended.
by: CM10/17/2017
Like the other reviews state, these things are hefty. The Box was about 3lb for two of them. We will use them for the first time in a couple weeks, but they appear legit. Also, we got 3/8 carriage bolts so they can be flush with the bracket.
by: Robert02/28/2019
Seem very heavy duty. Installed with 3/8 inch carriage bolts to trailer flooring. As advertised. Very quick turn around from ordering to receiving order.
by: jimmy07/12/2015
Big, huge D ring. Could probably attach an aircraft carrier to a dock with minimal fuss. Seriously, its pretty big but will work well if you''re an 'overkill' kind of guy like myself.
Comments
Still works great. Ive hauled a number of really heavy items and theres never been a problem.Real glad I bought these a year ago. Great value.
jimmy - 07/11/2016by: Dan 10/22/2021
High quality and fast shipping
by: Cliff W.06/19/2014
Got these to add to the bed of my truck for more tie down spots for 4 wheelers and my sons dirt bike. Attached to my tool box and they work and fit great!!!
Comments
Great!!! Helps out a lot tying things down.
Cliff W - 06/19/2015by: Darren05/23/2014
Hefty tie down anchors. I was going to weld or bolt/weld 4 of these onto my lightweight folding trailer for motorcycle transport, but I'm quite sure a couple of sturdy bolts, lock washers, and nut should do the trick. Anyone know the correct carriage bolt size to securely fit square holes?
by: Ray06/06/2013
I ordered 8 heavy duty bolt tie downs for my two trucks. After they arrived, I took a free day to install them. Well into the project, I discovered that I had only 7 bolt tie downs and one that has to be welded, which I cannot use. Being a little more conscientious when putting the order together would have saved me a lot of time in calling, returning the wrong part, waiting for a new one and then hauling out the tools again.
As for the correct tie downs and the ratchet straps I ordered, they are excellent quality and I would recommend them.
by: Wayne 07/01/2020
The tie downs I received were bigger and better than what I expected I used grade A bolts to anchor to the floor of our trailer that halls ranch/farm equipment. These tie downs won’t break. Great product and a great price and yes I recommend this tie downs. Retired 2
by: Kurt04/18/2021
Products are very good quality
by: Ryan R.03/19/2017
Great for making easy access tie downs on trailer deck.
Comments
Everything is working great. Your parts helped me put a nearly new, yet fender-bendered, trailer back together for a very reasonable price. It rolls down the road great!Ill probably be contacting you all again in the near future for a wiring harness for a trailer brake controller on my new-to-me F250 when the weather finally decides to dry out a bit!.
Ryan R - 03/20/2018by: Kirk Hall09/16/2016
Used these as tie downs for my UTV on a snowmodile trailer. Works well.
Comments
Excellent after a year
Kirk H - 09/16/2017by: Jim 08/04/2021
Easy to install. Does the job.
by: Mike07/09/2018
awesome, products are still worked great
by: David04/13/2018
I would not ever consider buying tires anywhere else than etrailer. Your 5 star tires,service and follow up are wonderful.
by: Billie12/08/2016
I under estimated the size of this thing, and the fact that it holds 12,000 lbs (stamped on it), but I got exactly what I ordered. I shouldn't have a problem holding my boat down with them (or picking it up)
Comments
Thanks for your business and your review, Billie. As a precaution, tie-down anchors must be chosen according to their safe working load limit WLL. The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
-- Laura E - 12/15/2016by: Pete03/01/2019
Great product, fast shipping, excellent for home made flat beds,
by: Prabhakar Sonparote07/11/2014
Just great company to work with. Fast shipping. Excellent product. Absolute no need to worry when you order from etrailer.com.
by: Roger Dorr09/22/2016
They are going to work fine. Might order our wire harness for my trailer.
25
111
Show More Reviews
Ask the Experts about this Brophy Tie Down Anchors
- Availability of 2-3/8 inch Wide Anchor D-RingFor a D-ring that is overall 2-3/8 inches wide you would want the part # LRB1. I believe that is the dimension you are looking for. I attached a review video for you to check out as well.
view full answer... - Could the Brophy D-Ring Anchors part # LRB1 Get Welded to Trailer FrameYou definitely could weld the Brophy D-Ring Anchors part # LRB1 to your trailer frame if you wanted to install them. You would just want to make sure that you are in a well-ventilated area as these are zinc coated. I attached an install video for you to check out that shows them getting bolted on as well.
view full answer... - Tie Down Anchor Recommendation for Alumna TrailerSounds like you are looking for D-Ring Tie Down anchors like the part # LRB1 which would get bolted to the floor of your trailer and has a 4,000 lb capacity. I attached an install video as well.
view full answer... - Brophy D-Ring Dimensions For Tie DownsBrophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs # LRB1 have a 3-1/2 inch outside to outside length, a 2-1/2 inch inside length, and a 2-3/8 inch inside width. The mounting bracket is 2 inches center to center on the mounting holes. I've attached some videos to help.
view full answer... - Recommended Way to Install Heavy Steel D-Ring Tie Down to Aluminum Floor of Car HaulerUsing a piece of plywood between the aluminum will not hold up as well because the wood will start to weaken and will rot over time. The best way to install the trailer D-Ring Tie Down Mount, part # LRB1, to the aluminum floor in your car hauler would be to mount it through the frame of the trailer if possible or using a steel backing plate would suffice. It would probably be good to use some sort of gasket material between the aluminum and the steel to prevent any oxidation or reaction...
view full answer... - What Size Bolts Should be Used to Mount the Trailer D-Ring Tie Down, # LRB1I went out to the warehouse to measure the square holes in the Trailer D-Ring Tie Down, # LRB1. According to my measurements it will accept bolts no larger than 7/16 inches in diameter. A 3/8 inch bolt would probably be the most ideal size to use.
view full answer... - What Size Mounting Hardware is Needed for Trailer D-Ring Tie Down # LRB1According to my measurements the mounting holes on the Trailer D-Ring Tie Down, # LRB1, will accept bolts no larger than 7/16 inches in diameter so you could go with a 3/8 inch bolt/nut or screw. You can just use standard hardware which can be obtained from your local hardware store. We do not offer any hardware for these tie downs.
view full answer... - Mounting Hole Diameter of Brophy D-Ring Tie Down Anchor # LRB1Sounds like you are asking about the distance between the mounting holes of the # LRB1, which is 2 inches, or the diameter of ring it is designed to fit which is 1/2 inches.
view full answer...
- Width of the Mounting Bracket for the Brophy D-Ring Tie Down Anchor # LRB1I went out to the warehouse and found that the width of the mounting bracket for the Brophy D-Ring Tie Down Anchor # LRB1 measured 1-3/4". I have attached a photo with the dimensions listed for you to check out.
view full answer...
- Install Hardware for Brophy D-Rings LRB1According to the measurements we took the mounting holes on the Trailer D-Ring Tie Down, # LRB1, will accept bolts no larger than 7/16 inches in diameter so you could go with a 3/8 inch bolt/nut or screw. You can just use standard hardware which can be obtained from your local hardware store. We do not offer any hardware for these tie downs so you would have to source it locally.
view full answer... - What Kind of Hardware Should I Use For My Trailer D-Ring Tie Downs?The Trailer D-Ring Tie Down item # LRB1, will accept bolts no larger than 7/16 inches in diameter so you could go with a 3/8 inch bolt/nut or screw. For your application you can use standard hardware from your local hardware store. I recommend using the same material the D rings are made out of, which is zinc-plated steel, this will keep the d-rings from oxidizing.
view full answer... - What Finish Does the Trailer D-Ring Tie Down # LRB1 HaveThe Trailer D-Ring Tie Down # LRB1 that you referenced has a zinc finish to prevent corrosion. Check out the review video I attached as well.
view full answer... - Identifying Brake Controller Bracket Installed in 2007 Ford ExpeditionFeel free to email me those pictures and I can see if it's a controller we carry or not.
view full answer...
- Can Curt D-Ring Tie Down Anchor Be Welded to Aluminum TrailerI have a solution for you, but it is not easy to weld steel to aluminum. The Curt D-Ring Tie Down Anchor # J-705 is made of raw steel. It will not work well to weld on to your aluminum trailer because of the differences in the melting points of these metals. All of our weld-on D-rings are made of steel. A skilled professional welder may be able to weld the # J-705 to your aluminum trailer. Your best option will be to use a bolt-on D-ring, like the Brophy D-ring Tie Down Anchor # LRB1....
view full answer... - Construction of and Attachment Method for CR Brophy # LRB1 Tie-Down RingThe CR Brophy # LRB1 features a zinc plated ring. I suppose the ring could be welded into place, but the only way the 2,750 lb WLL can be maintained is by installing it by bolting it into place, as the manufacturer intended. Installing it in any other manner would have an unknown effect on the weight bearing capacity of the D-Ring Tie Down. If you decide to attempt welding a zinc plated item, be sure to do so in a well-ventilated area, as galvanized or zinc plated items can give off toxic...
view full answer... - Installing Brophy D-Rings on OSB Trailer FlooringWhen used along with a steel backing plate, the Brophy D-Ring Tie Down Anchor # LRB1 that you referenced should offer enough support to provide a safe anchor point on the wooden T-Grade OSB flooring on your trailer. With that being said, a better option might be with the Brophy D-Ring Tie Down Anchor w Backing Plate # RR5K for your application, as it features a larger surface area on the D-Ring mount to better disperse weight and also includes the backing plate for installation. It has...
view full answer... - Tie Down Anchor Recommendation for Trailer That Has 3/4 inch Depth RestrictionI have a solution for you, but the part # RR5K would stick down too far for the hole you have that only can fit 3/4 inches of depth. For a similar rated tie down anchor that surface mounts instead you would want the part # LRB1 which has a 4k capacity. I attached an install video for you to check out as well.
view full answer... - High Capacity D-Ring Recommendation for Enclosed TrailerYour best solution will be the # LRB1. This D-ring anchor has a 4,000 lb working load limit, has mounting holes that are in line and has a continuously welded D-ring. I attached a review video for you to check out as well.
view full answer... - Can Brophy D-Ring Surface Mount Tie Down Anchor be Used on Wood?Since space is tight on your trailer, I recommend using the surface-mount Brophy D-Ring Tie Down Anchors, # SR15-C for a ring with a safe working load limit (WLL) of 1,600 lbs or # LRB1 for a ring with a safe WLL of 4,000 lbs. These will save you plenty of space and can bolt right through the wood floor of your trailer, as you can see in the photos I've added. I've also attached some review videos of these D-Rings for you to take a look at.
view full answer...
- Safety Chain D-Ring Mount Recommendation for a Small Utility TrailerThe D-Ring part # LRB1 that you referenced has more than enough capacity to be used for safety chain mount on your small utility trailer. A chain like the part # 2118-605-04 would work great as well.
view full answer... - Frame Mounted Forged D-Ring Tie Downs on Big Tex 70 Steel Car TrailerI can absolutely help you and make a recommendation. The floor of your Big Tex 70 car trailer is an 1/8 diamond steel plate. The 1/8 plate will be fine for a tie down point for anything but a car. You need a bracket not to fasten something down tight but to keep your car from moving. The rolling resistance would be too much for an 1/8 plate but sufficient for any type of other loads, like lumber, drywall, trash, pipe etc. You're going to need to drill into the frame to safely secure mounting...
view full answer... - Best Tie-Down Recommendation for a Pine Wood Floor Flatbed Trailer Carrying MotorcyclesI think installing the Recessed Trailer D-Ring, # RR5K, that you have referenced, would be better than # LRB1, because the backing plate is going to help distribute the load from the ring which would be better for your wood decking and make for stronger connection points. If you use this kit with the backing plate an attachment to the frame is not required as the backing plate, which would be underneath the wood floor, would prevent the hardware from pulling out. The only down side to...
view full answer... - Availability of D-Ring Trailer Cargo Control Tie DownsWe offer D-ring tie downs like the bolt-on Brophy # SR15-C and the weld-on Curt # J-705 that can be seen on the linked page. For one close to your measurements you might consider the Brophy # LRB1 which is also a bolt-on part whose dimensions are shown in the linked photo.
view full answer...
- Recommended Tie-Down Straps for Transporting TrailBlazer and Traverse on Car Hauler TrailerThe Erickson Ratchet Tie-Down Strap with Web Clamp and Snap Hooks, part # EM58501 that you referenced, is suitable for your application to secure a vehicle to your flat car hauler trailer by its tow hooks, but we also offer shorter straps like their 7-foot Car Tie Down # 58503 which also has hooks on both ends. To use either of these you'll need tie-down hooks on the deck of the trailer. If you need D-Ring tie downs you can use # LRB1 from Brophy. If you prefer you can use 4 axle straps...
view full answer...
Do you have a question about this Tie Down Anchor?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality tie down anchors for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate tie down anchor information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Wilson B
Updated by:
Jacob W
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.