bing tracking image
  1. Tie Down Anchors
  2. Brophy
  3. D-Ring
  4. Tie-Down Cleats and Rings
  5. Recessed Mount
  6. Trailer Tie-Down Anchors
  7. Truck Tie-Down Anchors
Brophy Swiveling D-Ring Tie Down Anchor - Bolt-On - 6-5/16" Wide - Recessed Mount - 2,000 lbs

Brophy Swiveling D-Ring Tie Down Anchor - Bolt-On - 6-5/16" Wide - Recessed Mount - 2,000 lbs

Item # RR06
lowest price pledge
Our Price: $23.30
You Save: 12%
Tie Down Anchors
Orders above $99 qualify for Free Shipping
Shipping Weight: 2 lbs
In Stock
Brophy Trailer Tie-Down Anchors,Truck Tie-Down Anchors - RR06
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos


Need help with installation?
Locate installers near me
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. WLL is 2,000 lbs. Lowest Prices for the best tie down anchors from Brophy. Brophy Swiveling D-Ring Tie Down Anchor - Bolt-On - 6-5/16" Wide - Recessed Mount - 2,000 lbs part number RR06 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (166)
  • Q & A (0)
  • Photos
  • Why etrailer?

Brophy Tie Down Anchors - RR06

  • D-Ring
  • Tie-Down Cleats and Rings
  • Recessed Mount
  • Trailer Tie-Down Anchors
  • Truck Tie-Down Anchors
  • 2000 lbs
  • Brophy

This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. WLL is 2,000 lbs.

Utility Trailer D-Ring Tie Down

  • Recessed Ring Swivels 360 Degrees
  • Zinc Plated
  • Bolt-On Design
  • Capacity: 6,000 lbs.
    • Safe Working Load Limit: 2,000 lbs.
  • 4 bolt holes are 3-13/16" apart
    • Bolt holes are 1/4" in diameter


Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.

RR06 Trailer D-Ring Tie Down, Recessed Swivel

Customer Reviews

Brophy Swiveling D-Ring Tie Down Anchor - Bolt-On - 6-5/16" Wide - Recessed Mount - 2,000 lbs - RR06

Average Customer Rating:  4.7 out of 5 stars   (166 Customer Reviews)

This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. WLL is 2,000 lbs.


Good, solid piece. 2K WLL and 6K break strength are higher than most other comparable swivel D-rings and flush mount D-rings. I have a steel deck trailer and one of my flush mount D-rings failed so I replaced all 4 with these. Being as mine is steel deck, welding is a solid install. I trimmed the edge flange for a tidy fitment for surface mount but later decided to just mount from below and weld in from the top. It came out very nice, I suggest similar mounting for those with steel trailers. of course, I had to grind off the zinc from the weld zone and painted with rustoleum both on top and from below.

1yr update: these still are working fine with one flaw. There is no drain hole. the cups easily fill with water of course that should have been obvious from the start. Its hot here in Texas and I assumed the water would evaporate quickly with no changes but it doesnt. I first drilled a 18 hole near the bottom rounded corner of the cup to drain the water, which works if it wasnt for the debris. They also easily collect various plant debris unless you store yours in a garage which is unlikely for this type of trailer. so the 18 hole clogs. next I went to a 316 hole. It still has the propensity to clog. plant debris + standing water = rust. Im unsure of how big of a hole you can go before you begin to compromise the strengthrating of the cup & tie down assembly. These should have been designed with the appropriate sized hole already cut, or at least a guideline of how big and where I could drill my own holes. Unless you need the flush mount swivel kind, the surface mount D-Ring type would eliminate this long term failure mechanism cup rusting out. No, the plating wont protect it forever and I painted any exposed metal to combat any issues.
Morgan D - 08/06/2020


Brophy swiveling D ring tie downs are pretty awesome. Super heavy duty, really like the Swivel design. By having the freedom of movment the ancor is never in a bind, at any angle and tension is pulled evenly from any direstion. The matching backing plates are a must as far as I'm concerned. Installation was easy. All holes on the backing plates ligned up well. No issues. I will give it up to also for the fast shipping. It means alot when you have a project going on. Over all satisfied with my purchase.


I do like these swiveling d-rings and the metal backings. They are going to make it so nice to tie stuff down. There are one in each corner of my trailer.


Overall I really like these things and they have worked well. My only complaint is that on my utility trailer they are exposed and there is no way for water to drain out of them. I'm thinking about drilling a hole(s) to avoid this problem. No signs of rust though


Called customer service because I wasn’t exactly sure what I wanted. Talked to Molly and she pointed me in the exact direction I wanted to go. She even helped me save some money by not buying the kit with the hardware because I wanted to use stainless steel carriage bolts for a flush finish on top. Only modification I had to make was drill the holes out bigger on tie down to except the square shank on the carriage bolt.


This is exactly what I was looking for. I installed 4 of these in my enclosed cargo trailer to make it a car hauler for my 1956 Jeep CJ5. They were easy to install and they'll work great.

Theyre working exactly as I had hoped. Ive towed my trailer with the Jeep on it about 1500 miles to various events without one problem.
Terry H - 04/01/2016


Had to buy a 4 3/8 hole saw to install. Very happy with the results. Need to make sure your hold down strap hooks are big enough for the D-ring.


Product is fine not a single thing wrong with it. That said it was the manner in which the order was shipped and the packaging. Heavy metal items with sharp corners were placed unwrapped or retained in a box with soft and polished plastic finish, absurd!
I got lucky, the plastic cover on the Weathertech items protected them from damage. Longer shipping they would have not made it.


I needed 8 tie downs for a new trailer in addition to the four that came with it. etrailer had exactly what I needed. On line ordering was simple and quick. Shipment arrived quicker than I thought, two days later. Great product and service!


Parts always show up in a timely manner. Always have what I need in stock. Great Customer Service!!!! I have ordered Fifth wheel hitches to trailers parts and have always been happy with the products I have received!!!


Great customer service and super fast delivery. Product is great too! Will definitely make our trailer more versatile.

The tie downs have worked great. I had to drill some drain holes in them but other than that they are definitely more versatile than other tie downs.
Scott I - 07/06/2020


the products ordered were as described and are great quality parts that will play a great role in upgrading my enclosed R&R all aluminum trailer. the product selection etrailer has is second to none and i will shop here first next time.

the shipping of the products were top notch, for as they arrived in a very timely manner. great job etrailer!


they are just for back up if one breaks.


It was a great experience working with I ordered my products, and a couple days later they arrived at me house.


didn't install yet but look heavy duty and are the same as the factory ones on my trailer.


They work fine thank you!


great product very well built eazy install recomend backing plate


Nice construction, seems pretty heavy duty. Swivel works well.


just as described thanks


Tie downs work good for securing my rig and look good after a year of use on my trailer. They do need a drain hole drilled in the bottom to let rain water escape and not accumulate.


Good Heavy duty Item.


Great product. Supper fast delivery will purchase again in future from this company as I an very pleased with the process and product.


Works great and very strong !


Great product. Easy to use.


I can't believe how well built these are. They also look very nice.turn and swivel very nicely.

Show More Reviews

Ask the Experts about this Brophy Tie Down Anchors

  • Can Brophy D-Rings be Drilled to Allow Water to Drain Out
    Since you already have the D-rings # RR06 you could drill a couple of small 1/16 inch or smaller holes at the lowest part of each ring housing to allow water to drain out. The D-rings are zinc-plated to resist corrosion so that will also help.
    view full answer...
  • Does Brophy Swiveling D-Ring Tie Down Anchor # RR06 Have Capacit for Use with Car Hauler
    The Brophy Swiveling D-Ring Tie Down Anchor # RR06 would work great in a car hauler application like yours. Each of these has capacity of 2,000 lbs working load limit and 6,000 lbs break strength so with a few of these securing a vehicle you'd have more than enough capacity. Welding a zinc coated steel is possible but requires a lot of ventilation!
    view full answer...
  • Depth Needed To Mount Trailer D-Ring
    I pulled a trailer D-Ring from our warehouse and took a measurement for you. the depth of the D-Ring housing from the bottom of the flange with the mounting holes is 7/8 inches. The 1/4 inch mounting holes are spaced 3-3/16 inches apart. The mounting plate you would use under the surface you are mounting the D-Ring to, is part # BP06. This would offer much more support than just wood.
    view full answer...
  • How to Determine Proper D-Ring Spacing In an Enclosed Car Hauler Trailer
    Since you are planning on installing these Trailer D-Rings # RR06 in a plywood floor I would recommend you also get the Backing Plate # BP06 to offer better support than just the wood of your trailer floor. As far as the placement of them in your trailer, you will need to consider what vehicles you will be transporting. If it will be only one vehicle I would recommend loading that car in the trailer and then strategically place the D-rings to give you the best possible mounting points...
    view full answer...
  • What are the Dimensions of the Brophy D-Ring Tie Down RR06
    I pulled the Brophy Trailer D-Ring Tie Down, # RR06, from my warehouse to measure and verified that the diameter of the flange is in fact 6-5/16 inches. I also verified that all other measurements on the product page are correct. I have attached the photo of the dimensions for you to reference. We recommend using the backing plate, # BP06, with this tie-down to provide extra support when securing cargo.
    view full answer...
    Image 1 for
  • How to Mount the D-Ring to a MC10 Motorcycle Trailer for Strapping in a Honda Goldwing
    You would need to drill a hole that is 4-3/8 inches in diameter for the base to fit through and then use nuts and bolts appropriate for the surface it is mounted to in order to secure it. It is recommended to use the backing plate # BP06 under the surface where the D-Ring is installed to maximize its capacity and offer support. In order to drill out the hole you can use a large enough hole saw drill bit or use the backing plate as a template and a pencil to mark the diameter needed and...
    view full answer...
  • What Size Mounting Hardware is Required to Install the Trailer D-Ring Tie Down, # RR06
    The Trailer D-Ring Tie Down, # RR06, has mounting holes that are 1/4 inches in diameter. We recommend using backing plate # BP06 when installing this tie down to provide support for the tire down.
    view full answer...
  • Parts Needed to Mount the Swiveling D-Ring on a Steel Deck Trailer
    As long at you have the appropriate size bolts and hardware for the D-Ring Tie Down Anchor # RR06 you will not need the backing plate. The backing plate # BP06 wouldn't offer your D-ring anymore support than the steel frame itself would, but it could come in handy as a nice template for drilling the holes in your equipment trailer.
    view full answer...
  • Backing Plate Availability for the Brophy D-Ring Anchor RR06
    For the backing plate of the Tie Down Anchor part # RR06 you would want the part # BP06.
    view full answer...
  • Can the Brophy Swiveling D-Ring Tie Downs Be Used To Secure a 5,000 Lb Vehicle with Backing Plate
    The Brophy Swiveling D-Ring Tie Down Anchor part # RR06 with the Backing Plate for RR06 Recessed Swivel D-Ring Tie Down part # BP06 are a great, easy to install set of tie-downs which can be used for securing a vehicle. The tie-downs themselves have a 2,000 lb working load limit. That said, you will be limited by the attachment point if lower. It would be very difficult for me to give a definitive answer of the weight capacity limits of your floor so for this I must recommend you reach...
    view full answer...
  • How to Install the Trailer D-Ring Tie Down # RR06 on a Trailer
    If you look below the specs for the Trailer D-Ring Tie Down, # RR06, you will see that the lip is wider than the base . You would need to drill a hole that is 4-3/8 inches in diameter for the base to fit through and then use screws appropriate for the surface it is mounted to in order to secure it. It is recommended to use the backing plate # BP06 under the service where the D-Ring is installed to maximize its capacity and offer support. In order to drill out the hole you can use a large...
    view full answer...
  • Hardware for Brophy Swivel D Rings Part # RR06
    Installation hardware is not included with the Swivel D Ring part # RR06 due to the unknown nature of the surface that the end user will attach it to. Depending on the weight of the object that will be held down, and the thickness of the surface it will be attached to, you also might want to consider the backing plate part # BP06.
    view full answer...
  • Difference Between Brophy Tie-Down # RR06 And # RR6K
    There is no difference between the D-Ring Tie Down, part # RR06 and the tie-down that is included in the # RR6K other than the backing plate and the mounting hardware. the D-Ring is the same for both of these items. These have a capacity of 6,000 lbs and a safe working load limit of 2,000 lbs. These are a bolt-on design. The recessed ring swivels 360 degrees. I have attached a photo of the tie-down that shows the dimensions you can check out.
    view full answer...
    Image 1 for
  • Difference Between Brophy Swivel D-Ring Anchors # RR6K and # RR06
    The only difference between the Brophy # RR6K and # RR06 is that the RR6K includes the backing plate and mounting hardware while the RR06 is just the D-ring unit alone.
    view full answer...
  • Availability of CR Brophy D-Ring Tie-Down Without Countersunk Holes
    Was it the holes themselves you weren't wanting, or the fact that they're countersunk that you don't care for? Brophy doesn't make a similar tie-down anchor without holes, but they do offer some with holes that aren't countersunk like part # RR05 with a 5K max load, or 1600 lb safe working load limit. There's also the # RR06 with a 6K max, 2000 lb safe working load limit. For a more secure installation, there's backing plates available, if you went with the # RR05, you'd use the # BP05...
    view full answer...
  • Recessed D-Ring Tie Down Recommendation for a Trailer
    The D-Ring part # RR06 has a 2,000 lb capacity. That is the only recessed mounted D-ring we carry that has a capacity between the # RR01C and the # RR05. I would recommend you go with more capacity that you need as opposed to less than you need.
    view full answer...
  • Availability of Tie Down Anchor that Mounts Flush on Mounting Surface
    For a D-ring tie down anchor with a similar capacity and doesn't require a recessed mount we have the part # SS15-C which has a 1,600 lb capacity. I attached a review video for this anchor for you to check out as well.
    view full answer...

Do you have a question about this Tie Down Anchor?

  • Why

    At we guarantee:
  • Highest quality tie down anchors for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tie down anchor information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Laura H
Updated by:
Laura H
Employee Jacob W
Updated by:
Jacob W
Employee Dustin K
Video by:
Dustin K
Employee Zach D
Video by:
Zach D
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Hayden R
Installed by:
Hayden R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924