Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware - Bolt-On - 2,000 lbs - Qty 4

See what our Experts say about this Brophy Tie Down Anchors

• Recessed Tiw-Down Recommendation for a Trailer with 2x6 Wood Floor
  Thanks for reaching out, Ken! I really like the Brophy Swiveling D-Ring Anchors # RR6K-4 because they look clean when installed (see attached photo), and they come with all of the hardware and backing plates needed for the installation. Each D-Ring has a working load limit of 2,000 lbs so you can secure up to an 8K load with this setup.
  view full answer...
• Does Brophy Swiveling D-Ring Anchors Come with Hex or Carriage Bolts
  The Brophy Swiveling D-Ring Anchors with Backing Plates and Hardware part # RR6K-4 no longer comes with hex bolts. Instead, it comes with carriage bolts now which makes for a smoother surface once finished.
  view full answer...
• Does Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware Come with Hex Bolts
  The Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware - Bolt-On - 2,000 lbs - Qty 4 Item # RR6K-4 comes with hex bolts like you can see in the attached picture. I was not able to find an reference from us to it coming with carriage bolts.
  view full answer...
  
• Recommended Tie Down Anchor for Aluminum Trailer
  The Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware - Bolt-On - 2,000 lbs - Qty 4 # RR6K-4 are a great choice if you're in need of fixed points on the floor of the trailer and don't care much about flexibility of spacing for different sized cars. If you're looking for a bit more overall flexibility then I recommend using Erickson E-tracks like the # E19148. These tracks will allow you a wider variety of tie down spots along the trailer floor, so it will just make the overall...
  view full answer...
• Mounting Brophy Swiveling D-Ring Anchors on Wood Floor Trailer
  You are correct. You will want to use the backing plate to sandwich the boards and provide the most secure connection when installing the Brophy Swiveling D-Ring Anchors # RR6K-4 . You can mount these in a recessed hole created by a router or punch all the way through the board using a hole saw.
  view full answer...
• Hardware Included With The Brophy Swiveling D-Ring Anchors # RR6K
  The Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware # RR6K-4 uses grade 5 hardware for attaching to your trailer. The included parts and hardware are all Zinc coated for corrosion resistance. The 16 bolts themselves are 5/16" in diameter and 2-1/4" long. You also get 16 lock washers and 16 nuts for attaching to the trailer. Each Anchor # RR6K is rated for a safe working load limit of 2,000lbs, which will give you a maximum safe working load of 8,000lbs when you are using...
  view full answer...
• Do the Brophy Swiveling D-Rings Have Weep Holes
  I have another solution but the Brophy Swiveling D-Ring Anchors part # RR6K-4 do not have weep holes designed into them. I agree that they are a great idea and should have them. I have installed these in the past and drilled my own holes to ensure proper drainage I then touched up the holes with clear spray paint to help keep rust away. The other option which does have weep holes to drain water and has the same capacity but you lose the Swiveling aspect is the etrailer D-Ring Tie Down...
  view full answer...
• Is There a B&W Biker Bar Compatible with a 2020 Indian Springfield Motorcycle
  I may have a solution for you, but B&W does not make a Biker Bar that is compatible with Indian motorcycles. However, you can use something like the Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware - Bolt-On - 2,000 lbs - Qty 4 # RR6K-4, which will bolt right to your wood floor and give you a secure way to transport your bike. You could use these with some ShockStrap Ratchet Tie-Down Straps w Shock Absorbers - 2" x 9' - 2,000 lbs - Qty 2 # 297-9RSDB and give yourself a safe...
  view full answer...
• Trailer Hitch Mount Bike Rack for Recumbent Bikes on a 2012 Hyundai Elantra
  The Swagman XC Extended rack # S64650-EXT is good for bikes with wheelbases up to 68 inches maximum. It looks like the Tour Easy bikes top out at a 69 inch wheelbase. We don't have a bike rack with a wheelbase maximum that will fit your 69 inches, but instead you could use a small utility trailer like the Detail K2 # K2MMT4X6, This trailer is 72 inches long and 48" long so you would be able to carry both of your bikes with ease. You would also need some straps like the Erickson Ratchet...
  view full answer...
• Will Brophy Swiveling D-Ring Anchors Fit a 2x6 Trailer Floor and Where Does Backing Plate Mount
  The bolts included with Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware - Bolt-On - 2,000 lbs - Qty 4 Item # RR6K-4 are 2-1/4 inches long. If longer hardware is needed for the mounting surface then you would obtain some from a local hardware store. The backing plate would always go beneath the mounting surface. It is meant to help distribute the force applied to the D-ring to a larger area than just the 4 bolt locations.
  view full answer...
• Recommended Solution for Tie Downs on Floor of Suretrac Aluminum Trailer
  I do have a solution for you, but I think welding something to the floor is going to really limit where you can place things to have them tied down. I don't think you're going to be able to get away from the issue with galvanic corrosion since most tie downs are going to be steel, you can still use a steel system on the aluminum floor as long as there is some sort of barrier between the two surfaces-rubber, plastic, wood, etc.. With all of that said, I've got 2 options for you to consider....
  view full answer...
• Working Load Limit Weight Capacity of Brophy Tie Down Anchors # RR6K-4
  Yes, you are correct. If you used all 4 of the D-rings of the Brophy Tie Down Anchors # RR6K-4 you'd have a safe working load limit created by them of 8,000 lbs. This would be more than enough for your car that weighs 3,900 lbs.
  view full answer...
• Could Brophy D-Ring Anchors w Backing Plates and Hardware # RR6K-4 Be Used to Secure Vehicle
  Each of the Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware # RR6K-4 that you referenced has a capacity of 2,000 lbs. If you used more than one you'd have enough capacity for most vehicles since the capacities essentially combine. Since this is a set of 4 this kit would easily have the capacity for securing a vehicle assuming they are installed properly and you were using a strap strong enough. The Erickson Ratchet Strap part # EM78627-MS would be a great strap to use with...
  view full answer...
• Recommended Trailer Tie Down for 2020 Harley Davidson Tri-Glide Ultra Trike
  I have a solution for you to secure your 2020 HD Tri-Glide Ultra Trike to the floor of a trailer, but the B&W Biker Bar # BWMC2301 is only compatible with the 2014 and earlier Tri-Glides. After 2014 they changed the location of the foot-brake, making this product incompatible with the Tri-Glide series trikes. Instead, I recommend using tie down anchors like the Brophy Swiveling D-Ring Anchors with Backing Plates # RR6K-4 which will provide you with 4 points on the trailer to secure your...
  view full answer...
• Recommendations for Securing Marching Band Equipment in Enclosed Trailer
  Instead of securing your marching band equipment from the floor you could secure it from the wall using the Erickson Vertical E-Track # E19146. You can then use the Erickson E-Track Tie-Off w/ D-Ring # E59143 to provide tie-down attachment points or use a tie-down like the Erickson E-Track Strap with Ratchet # EM59136 that installs directly into the E-Track .I have also attached a link to our selection of accessories that are compatible with the E-Tracks that you can filter through. An...
  view full answer...
• Is There a Torque Figure for Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware # RR6K-4
  There isn't a set torque figure to tighten the install hardware of the Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware # RR6K-4. Your best option would be to get them hand tight with appropriate tools when installing everything.
  view full answer...
• Motorcycle Tie Downs For a 2021 Indian Roadmaster
  I do have a recommendation for you as the B&W Biker Bar # BWMC2301 is impossible to use with your 2021 Indian Roadmaster as it does not have the tube frame like Harley's use. Instead you will need to use a Wheel Chock # FHG37ZR along with Straps # 297-7RSBB-M to secure your Roadmaster. The Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware # RR6K-4 will give you anchor points you can place in your floor if you do not already have anchor points.
  view full answer...

Do you have a question about this Tie Down Anchor?