Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This sturdy D-ring serves as an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring and is zinc-plated for corrosion resistance. Includes mounting bracket.
Features:
Specs:
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Average Customer Rating: 4.7 out of 5 stars (251 Customer Reviews)
This sturdy D-ring serves as an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring and is zinc-plated for corrosion resistance. Includes mounting bracket.Tie-down rings installed easily and are more sturdy and heavy duty than I expected. The swivel is nice as it makes the anchorage more versatile. Plus they look great.
I installed of these as part of my project to replace the floor of my 16 ft. utility trailer. I was able to drill and chisel the countersink without too much trouble. It is challenging to drill the holes for the bolts to align perfectly with the bottom bracket. In fact, I am not sure I could have done so with all the other boards installed. I recommend doing this as part of a new floor install. I Lao agree with some other comments that the bolt holes are very close to the countersink hole. This makes it very difficult to avoid collapsing the bolt drill hole into the countersink hole, which further affects the ability to drill straight. I think if I were to do it again, I’d mark the boards, take them off the trailer, and use a drill press. All that said, I really like the look and function of these anchors. I think they will perform well in the rough-sawn oak floor. Here are some pics of the finished job:
Just remember, these are rated to 6000 lbs, but the floor board they're bolted to probably aren't. You'll definitely want a steel backer behind these if you're really going to crank down on them.
These were additional tie downs for a race car, so I welded 3/16" plate between the trailer's frame rails and bolted through those.
Great product, just what we needed. We had to make some deliveries recently in the rain, and the only drawback was that they filled up with water. Would have been nice to have some drain holes (we drilled our own). A little labor intensive to install on a metal diamond plate truck bed.
A good starting kit out of the box. I drilled drain holes in the wells of the bracket to allow rain water a path out. The backing plate holes are a little tight and the mounting hardware assembles easier if those holes are drilled out one or two drill sizes larger. Installed on a steel deck trailer very nicely.
These things are huge.
Fit and finish are better than expected.
I received a complete order down to every nut and lock washer.
I couldn’t find this style and load rating anywhere else.
Very pleased.
I used a 4 1/2” hole saw, works perfectly....not sure why the instructional video calls for 4 3/4”
We installed these in two of our flatbed delivery trucks, and they work great!
The drivers are very happy with the ease of being able to tie things down without having to use the hooks underneath the flatbed.
I like the flexibility of the swiveling D-ring and it's recessed in the floor.
Product is amazing!!! Makes anchoring down objects a breeze.
Myron B.
7/19/2021
This product is amazing and still going strong
Bought these tie downs to install on a new utility trailer I purchased for hauling my motorcycle around. I would have given them 5 stars but the installation was a little more of a pain than I thought it would be. If you are not comfortable with using a router, you might be better off buying a different setup or using a buddy to help install. Otherwise, these are great tie downs.
Ryan N.
4/14/2020
A year in and these are still holding up great.
Great products and service
Added these to my trailer so I could secure our side x sides separately. They are an exact match to the ones installed from the factory by Kiefer on our trailer. Rated for 6000 lbs. and appear to be very capable. I will definitely do business with etrailer again as they answered all my questions and were very helpful picking out a weight distribution hitch for my set up as well. Thanks etrailer!
I purchased these swiveling D-rings to install on my gooseneck trailer for strapping down vehicles and other items that are awkward to strap using the D-rings on the rub rails. I haven’t installed them yet but the product likes to be good quality. I like how it’s a complete package with the hardware and the backing plate included. The only thing I would change is that I’d rather have carriage bolts instead of regular hex bolts just to have a smoother finish, but I’m overly picky. The only reason I gave the D-rings a 4 star rating is b/c I haven’t installed or used them yet.
I received my package in a timely manner and everything was packaged nicely. I have had good luck so far with using Etrailer.com and would recommend them to anyone.
Very versatile and strong. Hooked 3 motorcycles at once using this as one of the anchors.
The quality of this product is extremely good. Using on 16ft tandem trailer to haul Argo Aurora with no issues. These work great as tie downs for smaller items such as furniture and cabinets also.
Excellent communication and fast shippi ng.
I received these a couple of days after ordering. The quality is great. I plan to modify the trailer deck tomorrow to install them. They are even better than what I thought they would be.
Steve S.
7/13/2020
I bought these as tie down points for a Harbor Freight trailer - overkill I know. But they work great.
I don't know why no one else has reviewed this kit yet, but in any case I am sending mine back because of the lack of carriage bolts. I had watched the install video of the 5K version which has carriage bolts (and square holes). I prefer the design of these, but wish they were about 2/3rds the size and came with square holes and carriage bolts. The steel is really thick, so filing square holes by hand is a chore (I tried with a Dremel tool also). Who wants to deal with sharp hex bolts sticking up to snag everything when done? Not me. Too much hassle to fix more than a couple of them by hand. FYI the included bolts are 5/16" x 2.25" zinc-plated hex heads.
Great product. Needed the 7inch of drop for my lifted truck.
Hitch is easy to install. Very well built. Heavy duty.
These have proven to be very versatile in tying down everything from furniture to motorcycles. They are easy enough to install although I did change out the bolts supplied to a round head to make them less snag prone when sliding cargo over them. I made sure when I drilled the holes through the floor I was right next to a c channel of the frame so at least one bolt was going through a frame member in addition to the backing plate. They are very well made and strong. I would highly recommend these over the standard d rings that I had in my last trailer.
Works as described.
Tj
3/23/2023
Works great
Items arrived ahead of schedule and packed very well. Both items I ordered were reasonably priced and very high quality. I'm sure they will easily cover my rigging needs adequately. I recommend e-trailer as a quality vendor. You may be able to get items less expensive in other locations however beware of the quality when you do. Safety has a price.
Very fast shipping, came with a bottom doubler plate and hardware. Very substantial tiedowns! I am dressing a 12X7 box trailer to carry motorcycles and these tiedowns will be just the ticket!
Very good product
Do you have a question about this Tie Down Anchor?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dustin D.
4/22/2015
Ive now hauled a couple vehicles in the trailer, utilizing these anchors. I would definitely buy again, and as a matter of fact I am planning to get a few more to install. I just need a few more so I have more tie-down options.