bing tracking image
  1. Tie Down Anchors
  2. etrailer
  3. 2 x 4 Stake Pocket
  4. Stake Pockets
  5. Trailer Tie-Down Anchors
Trailer Weld-on Stake Pocket - 4 Gauge

Trailer Weld-on Stake Pocket - 4 Gauge

Item # HW03-080
Our Price: $5.03
Tie Down Anchors
Orders above $50 qualify for Free Shipping
Shipping Weight: 1.19 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Utility trailer stake pocket for use on truck or trailer flat beds. Designed to accept standard 2" x 4" stakes. Great Prices for the best tie down anchors from etrailer. Trailer Weld-on Stake Pocket - 4 Gauge part number HW03-080 can be ordered online at or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (46)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

etrailer Tie Down Anchors - HW03-080

  • 2 x 4 Stake Pocket
  • Stake Pockets
  • Trailer Tie-Down Anchors
  • etrailer

Utility trailer stake pocket for use on truck or trailer flat beds. Designed to accept standard 2" x 4" stakes.


  • Solid steel construction
  • Raw finish is ideal for welding
  • Works with standard 2" x 4" stakes


  • Inner dimensions: 3-9/16" wide x 1-9/16" deep x 3" tall
  • 4-Gauge thickness

TSW 5189 Trailer Weld-on Stake Pocket

Replaces HW03-080

Video of Trailer Weld-on Stake Pocket - 4 Gauge

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for etrailer Tie Down Anchors - Trailer Tie-Down Anchors - HW03-080 Review

Today we're going to be taking a look at part number HW03-080. This is the Trailer Weld-on Stake Pocket. This is for use on truck or trailer flatbeds, it gets welded on directly to the side. I can be used as an anchor point. It's designed to accept standard 2" by 4" stakes. We're going to take a look at the inner dimensions.

Starting with the overall width here from inside edge to inside edge. That's going to give us a measurement, we'll bring it over here to the edge so you can see it a little bit better, about 3 1/2". The overall depth to this point out here it's going to give us a measurement of about 1 5/8". The overall width from outside edge to outside edge, that's going to measure 4 1/16". The overall depth is going to give us a measurement of 1 7/8".

Then the overall height, that's going to give us a measurement of 3" tall. This is made from solid steel construction. It's going to give us a thickness of about 1/4". It's got a nice raw finish so it's going to require a little prep work for when you're ready to weld this on. That's going to do it for today's review of part number HW03-080. This is the Trailer Weld-on Stake Pocket.


Customer Reviews

Trailer Weld-on Stake Pocket - 4 Gauge - HW03-080

Average Customer Rating:  4.7 out of 5 stars   (46 Customer Reviews)

Utility trailer stake pocket for use on truck or trailer flat beds. Designed to accept standard 2" x 4" stakes.


Well made, metal is same size and thickness that came on trailer. Would recommend to anyone needing to add more tiedowns on your trailer.


This is a very high quality, well made product. It is exactly as described on the site. The price was very reasonable and it was shipped - and delivered - very quickly. I have had many stake body trucks and trailers and this would have worked excellently for its intended purpose as a stake pocket.

I will be using it to mount a stock front bumper on the rear of my Jeep Wrangler YJ by installing it sideways as a mounting bracket. Once drilled and mounted backwards and sideways (see pictures), the size I bought fits the ID of the bumper so it can be mounted over the bracket "tabs". I took a picture of the stock bumper mounted on the front to show how it mounts on the frame ends and held the stake pocket in place at the rear. The stake pocket tabs will slide inside the bumper which will then be bolted to it.

Although I'm not using it as designed it is an excellent solution for my application. Note to etrailer: custom bumper mounting hardware is hard to find. This stake pocket provides a solution and would make an excellent product marketing extension.


Well made stake pockets.


Exactly as advertised. Good product


Good products at reasonable price,


Excellent, thanks


Did what it was supposed to do.


Really appreciate the service. Received the Stake pockets within four days of the order.
Straight bends and no modification needed. Just welded them on and sent the trailer down the road with the customer.


Great replacement add-on addition to my trailer.

Still working great with no problems.
Darryl - 07/19/2020


Works great for equipment tie down. I used to use channel iron, but it was not the right depth to allow the hook on a chain to pass through.


Just what the front of my trailer was m issing.


These have some decent thickness to them at almost 1/4'' but a little more care in bending them should take place as in getting the ends squared up at 90 degrees. Then the outside part is not exactly flat has a little bit of a W in it. Not too bad for the price though.


These products are exactly what i needed and the costumer service at etrailer were exceptional. Told me when they were shipped and when the arrived all that i ordered was there. Excellent service!! I will be ordering for them again.
Thank you George and all the staff at!!!!


Not very heavy duty definitely won't be installing on my utility trailer afraid they'll bend on first load


Heavy Duty Stakes. I welded these to the side of my trailer and use them to anchor my Skidsteer to the trailer.


The stake pockets of very good quality. I haven't had a chance to install them as of yet but in the next week or so I will. I would recommend these.


Just what I was looking for.


Nice & thick wall, bracket/pocket has a bit of a bow to it. I will have to set up in my shop press to square it up, perhaps should look into the Curt weld-on pocket.


Great service with fast delivery.

holders are very beefy. They are quite a bit more stout than the current ones on my trailer.


As advertised and worked great. etrailer is great


These are just what we needed. They are very thick and will fit a 2x4 without modification. Excellent support for heavy loads.


Quality product, quick service




Show More Reviews

See what our Experts say about this etrailer Tie Down Anchors

  • Thickness of the Trailer Weld-On Stake Pocket # HW03-080
    I went and pulled a Trailer Weld-on Stake Pocket # HW03-080 from our warehouse to measure the thickness of it and found it to be .23 inches. Check out the video I attached to see me measuring it.
    view full answer...
  • How Many Weld-On Stake Pockets # HW03-080 to Install on Each Side of 12-Foot Trailer
    You can install as many of the Redline Weld-On Stake Pockets # HW03-080 on each side of your flatbed trailer as you need to properly support the load. In general 1 stake pocket per 3-foot section of trailer, or 4 per side in your case, should be sufficient for many applications but you will have to determine this for yourself.
    view full answer...
  • Difference Between the Stake Pocket Tie-Down Anchor # WFSPDR and # T355
    The Stake Pocket Tie-Down Anchor # WFSPDR and the Stake Pocket Tie-Down Anchor # T355 are made by different companies who use different manufacturing techniques so their prices are different. The higher rated one would be the one I would go with since it costs less. Both would work just fine with the # HW03-080.
    view full answer...
  • Stake Pocket Recommendation for a Trailer to Install Trailer Sides
    For a stake pocket that you could weld to the side of your trailer that would allow you to make your own walls for the trailer you could use the part # HW03-080. The inner dimensions of the stake pocket are 3-1/2" (w) x 1-9/16" (deep). This will fit a standard 2 x 4. For a bolt on application you would instead want the part # CE45004G. I attached an install video for you to check out as well.
    view full answer...
  • Difference Between Stake Pockets
    I believe you may have been referencing the Curt # C83072 and the etrailer # HW03-080 because the only stake pocket from Redline is the Stake Pocket Tie-Down Anchor # WFSPDR which has a D-ring and is much more than twice the Curt because it has a different application. Assuming that, the difference between the two stake pockets is simply the dimensions. The Curt # C83072 has inner dimensions of 3-3/4" long x 1-5/8" wide x 3" tall and has steel which is 3/16" thick, while the etrailer #...
    view full answer...
  • What Size Stake Pocket is Correct for Brophy Stake Pocket Tie-Down Anchor # T355
    You can use either the Redline Weld-on Stake Pocket # HW03-080 or the bolt-on CE Smith Stake Pocket # CE45004G along with the Brophy Stake Pocket Tie-Down Anchor # T355. I have included for you a link to our main page for cargo control items so you can review the available products for use with these tie downs.
    view full answer...
  • Stake Pockets for Utility Trailer
    We carry a number of stake pockets and you can choose the correct one for your application in terms of size and weld or bolt on. The bolt-on option is the CE Smith Stake Pocket # CE45004G which is 3-1/2" long x 1-1/2" wide x 2-1/2" tall, has a stake pocket opening of 3-1/2" wide x 1-1/2" deep and 3/8" diameter mounting holes. For weld on stake pockets there is the Curt # C83072 which is 4-1/8" long x 1-7/8" wide x 3" tall; the etrailer # HW03-080 which is 3-9/16" wide x 1-9/16" deep x...
    view full answer...
  • Can Stake Pockets be Used on Trailers & Are Erickson Hide-A-Hook Anchor Screws Self-Tapping
    Yes, you can add stake pockets to your trailer, and can either choose bolt-on stake pockets or a welded-on stake pocket. The options are the Rack'em Heavy Duty Stake Pocket # PK-BSP, Trailer Weld-on Stake Pocket # HW03-080, or Buyers Products Stake Pocket # 337B2374GZ. In regards to the Erickson Hide-A-Hook Truck or Trailer Anchor # EM09094, it does come with screws as opposed to bolts, but the screws are indeed self-tapping. I have added a link below to a quick video review for you...
    view full answer...
  • Comparing Steel Gauge Thickness For Bolt On 2 x 4 Stake Pockets
    The Rackem Stake Pockets part # PK-BSP are constructed of 1/8" thick, 10.5-gauge steel. The other 2 x 4 bolt on stake pockets are 11-Gauge steel part # CE45004G and 14-gauge steel part # 337B2374GZ. The thickest gauge steel 2 x 4 stake pocket we offer is the weld on stake pocket part # HW03-080 which is 4 gauge steel.
    view full answer...

Do you have a question about this Tie Down Anchor?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tie down anchor information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Cole B
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.