Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Durable rubber, jaw-style clamps with adjustable straps help you store and transport shovels, axes, high lift jacks, and more. They mount horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL per pair.
Features:
Specs:
Note: Quick Fist clamps are not to be used on exhaust pipes or any pipe that consistently exceeds a temperature of 180 F (82 C).
A new Quick Fist clamp fresh out of the mold can be stiff. Use two hands to open the jaws vertically and then pull each jaw once or twice. Close the jaws and open and close the strap a couple of times. It's now ready for mounting.
For applications where the Quick Fist clamp will be used at or near its maximum opening dimension, the clamp will not work in your hand, as it must be bolted to a fixed surface for the rubber to stretch properly.
Mount your shovels, axes, D-cell flashlights, and high lift jacks with the Quick Fist original clamp.
1. Use #10 bolt or screw to fasten. Do not over-tighten.
2. Mount with the strap facing in any direction.
3. To clamp: put the tool or implement into the jaws. With both of your thumbs on the strap, push strap to reach the desired tightness. Repeat as necessary.
4. For certain applications, like roof racks with round tubing, you can install the Quick Fist clamps using hose clamps. Make sure you center the hose clamp on the plastic washer to avoid cutting into the rubber clamp.
5. For smaller diameter objects, push jaw without strap inside the other jaw and tighten strap on top of jaw.
You may also install your high lift jack using three Quick Fist clamps spaced evenly along the steel bar of the jack.
1. Drill out a hole in the Quick Fist clamp with a 7/16" (12 mm) bit. Use a 2-1/2" (65 mm) long, 3/8" (10 mm) bolt to attach the clamp.
2. To mount the jack, hold it parallel to the three clamps. Put one end of the jack into a Quick Fist clamp, with the bolt through the steel bar, and then loosely lock the clamp. Next, place the steel bar into the other two clamps and lock. After all three clamps are holding the jack, tighten as necessary.
Average Customer Rating: 4.8 out of 5 stars (203 Customer Reviews)
Durable rubber, jaw-style clamps with adjustable straps help you store and transport shovels, axes, high lift jacks, and more. They mount horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL per pair.
Used one pair to mount a shovel and another pair to mount an axe to the bed rack on my pickup. Are still working great a year later.
Installed these on our Jeep Wrangler to hold a shovel. They hold really tight, should be a great addition to our kit. Also, MADE IN THE USA was a pleasant surprise!! Thanks for a great American made product!!
After searching the web for weeks, I was ecstatic to find these hooks! I'm sure I'm not using them for the purpose intended, but they look great holding my axe on the wall. My only gripe is that there is only one way to secure it to the wall. I'm sure at dead center is the optimal spot for mounting, but perhaps consider adding so diagonal screw holes on either side, that's where I ended up putting my screws in. Other than that the product easily exceeded expectations!
Received my clamps today and immediately got them installed. Product was exactly what I was hoping for and I like the different mounting options for them. Can't speak to there longevity but appear to be made with quality materials.
I made a rack for the ATV to hold my axe and shovel, the clamps seem to work pretty good so far. They are kinda hard to open and close in cold weather, (below 25 F.)
They claim to be good for 1" diameter, but they don't clamp as well as I would like, so I am going to get a bigger diameter handle to get a better grip. Overall I like them so far.
Mtman
12/11/2017
Ive had these on for over a year now, and they still work great! Been on sub-zero weather and over 90 degree weather and keep working and performing great!
Worked great for what I needed it to do. My #10 screw pulled through the square washer made from plastic, so I just added a small stainless washer and tighten up great. Highly recommend this product to anyone wanting to mount a tool on the outside or a moving recreational vehicle.
Excellent product for a great price
the wife uses it to hold down the bar on the walk behind lawnmower that engages the wheels. Her hands get arthritis and she can't hold it down long. It works perfect. Goes on easy. Comes off easy. Bang.
Greg
8/29/2023
Still works great, still soft and pliable. Quality materials.
Excellent product. Does what is claims.
The one bolt mounting is a little flimsy for very heavy items so you have to make the call yourself on safety.
There is no locking capability thus your fastened item can be removed quickly by anyone. Adds about 1" of clearance so check your location carefully.
Although the quick clamps are heavier than I needed they will work just fine. I am mounting them on the door post behind the drivers seat in my truck to hold a night stick “ Billy club”! I’ve had the club in my possession for over 50 years. Last time I wore it I was on duty in some Mediterranean Sea port.
Perfect solution for what I needed. Couldn't find anything close to this anywhere else online including Amazon. Using this to hold my folding dock ladder in place when it is out of the water. Good Quality. Thick, Flexible and strong.
I received the Quickfist Original clamps yesterday. They installed easily. I am using them to hold photography c stands in an enclosed trailer and so far they are holding strong. I will undoubtedly be ordering more of these!
I installed these clamps to hang an axe in my converted utility trailer and they are perfect. Work as expected. Only reason I didn’t give then 5 stars is because they didn’t come with bolts or screws.
Excellent mounting solution for my emergency axe in my trunk! Sturdy and dependable!
Excellent service with an Excellent product. 10/10
I’ve used the mounts and they have held up very well. I did have a tree branch get between a shovel and the roof rack and rip one mount apart but we was in some heavy brush so that’s expected driver error not faulty product. I have put them through it.
These are nice but it would be better if they included the #10 bolt and nut the instructions reference.
Perfect for mounting leveling jacks on off road trailer roof rack
These things are great. I use them for a specific purpose. Transporting my homemade PVC beers-bee set. These are connected to the top of my truck bed rack, each set running parallel to the bed.
Work perfect for the project we were doing with a truck bed
tool box.
Thanks
Used these Quick Fists to mount same hand tools to the ROPS on my tractor. Works great
Love the quick clamps. I bought a set of stainless steel bolts, washers, and nuts and drilled a hole through the rollbar and fixed the clamp directly to the bar. Easy as can be. One additional note though, if you're mounting something that is 1" diameter, this clamp will hold it, but not as tightly as I would have liked. To solve this, I just added a couple wraps of electrical tape to the place the clamp will secure (in my case, it was a shovel). Served two functions, one makes sure I put the shovel back in the clamps at the same height every time, and second made the shovel handle a nice tight fit in the clamp.
Dave J.
1/9/2018
Clamps are still working great. Weather hasnt fazed them and they still hold tight. Shovel doesnt move at all going down the highway or while rock crawling. My stainless steel mounting hardware solution is still working great as well.
Do you have a question about this Tie Down Strap?
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Javonte
3/25/2019
Thanks for taking the time to check-in. The product is still working as it should, and I am still as grateful as ever that I was able to find it on your site. Should I ever need another one, I know where to go. Thank you for the quality product and for the excellent customer service