Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Durable rubber, ladder-style clamps help you store and transport gear such as cords, fire extinguishers, and jacks. Mount horizontally or vertically to your vehicle, trailer, wall, or any flat surface. 120 lbs WLL per pair.
Features:
Specs:
Note: Quick Fist clamps are not to be used on exhaust pipes or any pipe that consistently exceeds a temperature of 180 F (82 C).
The Quick Fist long arm clamps can easily hold multiple tools, things with a handle (such as dollies), power cords, fire extinguishers, or high lift jacks.
1. The Long Arm QUICK FIST clamp can be mounted in any direction; but when mounted vertically, it is easier to release and engage the strap onto the latching post if the strap is hanging downward.
2. Use two 1/4" (6 mm) bolts or #14 wood or sheet metal screws, plus washers (sold separately) to fasten. Do not over-tighten.
3. After locking the strap on the larger latching post, either pull the strap tighter and use the small post as an additional lock (see illustration 1); or roll the remainder of the strap inward and fasten on the small post (see illustration 2).
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, were going to be taking a look at our quick fist long arm clamp. They come in a two-pack, part number QF40010. The clamps can be used to mount objects anywhere from a half of an inch up to four-and-a-half inches in diameter. These clamps are great for use on any kind of recreational vehicle, military vehicle, emergency vehicle, off-road applications. They really have a wide variety of applications it can be used for.Each clamp supports a safe working load of 50 pounds. To mount them, we use the a quarter inch bolt or a number 14 where their sheet metals screw with the washer.
We'll mount to the top over here, get two mounting locations. The clamps can be mounted in any direction. We can mount them horizontally, such as this, or we can mount them vertically like this to hang our equipment.The heavy-duty transportation grade rubber that click this uses to make their clamps is completely unaffected by elements or by climate, and it's also UV resistant. Were going to go ahead and hang these on our trailer here and show you what they look like when theyre in use. Hi. We're here at the trailer.
As you can see, weve got some other equipment mounted here. Were going to use the 2X6 that we've got here. Were going to mount them right here. I've already got marks here indicating level. Within our cases, we're going into the wood.
Were just going to use a coarse thread screw. Again, you can mount these using either quarter inch bolts or a number 14 sheet metal or wood screw. We got our crew, we got our washer, now we'll get them up here where we want them. As you can see, these are nice and snug. Real easy, simple installation. It's just two screws or bolts to do it.
Now, with their clamps in place, let's go ahead and pack up some gear on them. Again, we got a safe working load limit of 50 pounds, so we'll just be sure not to put anything on that's going to exceed that. Here were going to first mount our chainsaw. The rubberized texture on this strap here can be really good about not damaging the handle or anything like that. Then theres a nice secondary tab here that's going to help hold our excess in. As you can see it mounts up really nicely. We all feel little shock absorbency from when you're going over the bumps and stuff like that in the trailer. Lets say, in this application, lets say you've got some gear that you want to keep up and out of the rain or off the ground, so you got four-wheelers in here and they're muddy. Just like that secure access hook it up there. As you can see, it holds it well. Another great application for our clamps, and to be to keep cords, or hoses, or anything like that to organize. Another really nice application of our clamps are using them both to get the maximum holding power. That will complete todays look at the quick fist long arm clamp, sold into two pack, part number QF40010. .
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
Durable rubber, ladder-style clamps help you store and transport gear such as cords, fire extinguishers, and jacks. Mount horizontally or vertically to your vehicle, trailer, wall, or any flat surface. 120 lbs WLL per pair.Very tough and rugged, has held up well. I used it to replace the fabric straps that hold the bimini top in the engine compartment of my boat. When the old straps were not being used, I had to carefully tie them back to prevent them from being caught in the engine fan belt. This strap is much easier to fasten and unfasten because you simply stretch it until one of the slots fit over the big hook. The second smaller hook acts as a safety, especially when the strap isn't holding anything. I no longer worry about loose straps getting caught in the fan belt.
I purchased this item to fasten my rear door awning on my truck camper. It is a spring loaded retractable awning that came with no method to hold it in place while driving. I didn't want to rely on the tension spring. Heard too many stories of broken awnings on the side of highways due to cross winds. When I read this item was UV and weather resistant, it was a good fit for the application.
When I found this strap product at etrailer I knew that I possibly had found the bracket support I needed for a filter housing. The 2 straps were secured to a metro shelving unit with ss bolts, washers, and nuts with the attachment points to the shelves and not the posts. The straps snugly hold the 15" stainless steel housing for the filter without any marring of the surface. The price was right and the function is spot on for my needs.
Extremely sturdy and securely holds rather heavy tools.
Works just as it should.
Do you have a question about this Tie Down Strap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rick V.
6/6/2018
It holds the bimini top securely in place and is easy to fasten and unfasten. Im glad I got it.