Durable rubber, jaw-style clamps with adjustable straps helps you store and transport items up to 15" in diameter such as cans, tanks, or coolers. Permanently install on your vehicle, trailer, wall, or any flat surface. 300 lbs WLL per pair.
Features:
Specs:
Note: Quick Fist clamps are not to be used on exhaust pipes or any pipe that consistently exceeds a temperature of 180 F (82 C).
Mount items such as jerry cans, acetylene tanks, or coolers with the Quick Fist XL clamp.
1. The two pieces of the clamp must be mounted with each side facing (as illustrated) and with the arrows on each base facing each other. Use four #10 bolts or screws and appropriately-sized washers to fasten each base. Do not over-tighten.
2. If you are mounting a cylinder, make sure the bottom is on a floor, deck, or shelf. Alternatively, support it with a piece of angle iron or wood block (as illustrated). This makes it easier to tighten the straps with two hands.
3. Mount the base so that the strap is parallel to the outside edge of whatever you are holding.
4. The "ladder" half of the clamp can be stretched up to about an inch by pulling on the strap (not the ladder "steps" or cross pieces) in several places along its length.
5. If you are holding a cylinder, tighten by putting the "jaw" half through the tightest "ladder" section and then pull the two halves in opposing directions. If you are tightening a rectangular piece of equipment, you will need to push the "ladder" half as far as possible while keeping the "jaw" section flat.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at our Quick Fist XL clamp. It's sold as a quantity of 2. Its part number is QF60060. These straps work great on any kind of application, any kind of vehicle, even home or garage use. These are designed to mount round objects up to 15 inches in diameter or also equipment to 28 linear inches. Each of the clamps is going to support a safe working load limit of 150 pounds. Here at my fingertips are the arrows.
These help to identify which direction they should be facing. We want the arrows facing one another when we install our clamp. They offer quick and easy installation. The heavy-duty grade transportation rubber that they design these out of resist both UV rays and salt. Also, they're unaffected by different climates. Each half of our clamp is going to mount using 4 number 10 metal or wood screws and the mounting area here is 2 x 2 is what they recommend you have space-wise.
Each strap has a break strength of 300 pounds and they also offer a 1 year limited warranty, made completely in the United States. Now we're going to go ahead and show you how to install them and how they work with some gear attached. We've selected the area here we're going to be mounting our clamp in, and as we said before, we want the arrow to be facing towards the other half of our clamp. The other half of our clamp's going to be mounted here, so we're going to mount this one here. We've got our clamps mounted. We're going to secure the extinguisher here. We're going to bring it back against the wall.
We're going to find our tightest fit we can there. Secure it in there nicely. To secure our excess strap here, I like to just stretch it and get it caught on that next clip there.Keep in mind if you're using, maybe you've got a second tank or you've got a fuel tank or something like that you need to secure as well, simply mount this right here beside it, and that'll give you a second connection point.Or let's say you've got an acetylene tank or an oxygen tank or something that'll be taller that you want to support, well then simply mount your second set of clamps right here. That will complete today's look at the Quick Fist XL Clamp. It comes in a quantity of 2. Part number is QF60060.
.
Average Customer Rating: 5.0 out of 5 stars (5 Customer Reviews)
Durable rubber, jaw-style clamps with adjustable straps helps you store and transport items up to 15" in diameter such as cans, tanks, or coolers. Permanently install on your vehicle, trailer, wall, or any flat surface. 300 lbs WLL per pair.Definitely hd it's what I needed to secure an air tank on back of my garden tractor
I just bought a 2nd set. They are excellent for mounting items upright against the
trailer inside wall in order to save floorspace. The tension applied by the streps
preventing from shaking loose. They make for a need and convenient set up.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.