Durable rubber, jaw-style clamps with adjustable straps let you store and transport shovels, axes, high lift jacks, and more. Includes 2 brackets and reducer sleeves that fit 1" to 2" diameter roll bars and 2 Original Quick Fist clamps.
Features:
Specs:
Note: Tie-downs must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the tie-downs being used. For example, if you are using tie-downs with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 tie-downs to safely secure that load.
This Quick Fist Original clamp kit is perfect for securing tools and equipment such as shovels, axes, flashlights, high lift jacks, and more on your vehicle's roll bar. They can also be installed permanently on your vehicle or trailer or on the wall in your garage or shed. You won't have to waste time re-installing temporary holding devices such as bungees or straps each time you need to transport or organize your gear. Plus the durable rubber construction is ideal for outdoor use.
These clamps have a jaw-style design with built-in, adjustable straps to provide a secure grip on equipment that is 1" to 2-1/4" in diameter. Simply push the straps down and secure them into 1 of the 5 locking positions to achieve tightly clenched "fists" around your cargo. Raised bumps on the interior surface act as gripping pressure points that help hold your gear in place.
Quick Fist Original clamps are made of strong, durable rubber that withstands the elements. These 1-piece, molded rubber clamps have no metal parts that will corrode so you can drive on salt-treated roads without worry. The UV-resistant rubber won't fade or crack from exposure to sun, and it has an operating temperature range from -60 F to 140 F. The shock-absorbing rubber also protects your equipment from scratches and scuffs.
To set up your roll bar or to carry gear, first bolt a Quick Fist Original clamp (sold separately) onto the mounting bracket. Wrap one of the provided protective neoprene strips around the roll to protect it from scratches and to help prevent the mounting bracket from sliding. Then thread a hose clamp through the mounting bracket and wrap it around your roll bar or bull bar for a secure attachment.
Quick Fist Original clamps can be mounted to the roll bar mounting bracket horizontally or vertically so you can hold a variety of tools and equipment.
Note: Quick Fist clamps are not to be used on exhaust pipes or any pipe that consistently exceeds a temperature of 180 F (82 C).
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at these quick fist original clamps for your rollbars. This kit is going to include these two durable rubber jaw style quick fist clamps that will allow you to store and transport equipment on your vehicle's rollbar. So this is gonna work great for your emergency vehicles, your work trucks, off road vehicles, military vehicles, ATVs, boats, and other applications. This is going to prevent you from having to waste time reinstalling temporary holding devices like bungee cords, or straps each time you want to transport or organize your gear.
Having these mounted onto your rollbars is gonna provide a nice stable point for you to connect all your work gear. This will give us the ability to tighten down our straps to provide a nice tight grip on our gear, like our shovels, axes, high lift jacks and other gear with a one inch diameter up to two and a half inch diameter and weighing up to 50 pounds if you're using both clamps together to hold it in place. These clamps can be mounted in a horizontal or vertical position. So depending on the orientation you need for whatever gear you're wanting to put in place, you can achieve that. And these clamps themselves are going to have these interchangeable snap-in inserts that will allow the system to fit your rollbars that are one inch in diameter like we have here with this smallest opening one and a half inches, one in three quarters of an inch or you can keep those inserts out and have a two inch diameter opening here.
Very simple to get these installed. You'll just take one of the rubber pieces, put it on the bottom of the clamp and then surround your rollbar with the system here. Then you can use the stainless steel hardware to get those two pieces clamped onto your rollbar and then you're set to go. So you do wanna make sure that you're not mounting this above or on the rollbar any higher than the front seat or the back of the front seat to minimize the risk of a mounted object hitting someone if you we're to roll over. So just be mindful of where you're mounting these to keep everybody safe.
This is constructed of a molded rubber, so it is going to withstand heat, cold, road salt and UV rays. So it's gonna hold up really well for you and it is gonna be ideal for your outdoor use. And it is rubber construction so it will provide a little bit of a shock absorbing capacity there for your equipment that you have mounted. As far as our dimensions go, I'll show you on this one. We're looking about one and a half inches in width there, looking at just this base portion.
If you add in those snap-in inserts, take you up to about two inches in width. Our length is just under six inches. I'm gonna call it five and three quarters of an inch. And then our height, we're looking at right about six inches there. These are made here in the USA so you can trust they are gonna be a good quality for you. So if you are looking to get some of your gear mounted on your rollbars, these are gonna do a great job for you. That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Average Customer Rating: 4.8 out of 5 stars (18 Customer Reviews)
Durable rubber, jaw-style clamps with adjustable straps let you store and transport shovels, axes, high lift jacks, and more. Includes 2 brackets and reducer sleeves that fit 1" to 2" diameter roll bars and 2 Original Quick Fist clamps.I love these clamps. They hold fast to the roof rack and don't spin. I use them to hold my AX and Shovel on my off road camper. They can be a little difficult to mount by your self but I cannot question the design because they do exactly what I want. I have traveled to Texas, West Virginia, North Caroline, Georgia and Florida without giving my tools a second thought.
This works well. It’s just what I need for my shovel and axe on my TuffStuff rack on my Tacoma.
Works flawlessly after 1 year in an outdoor environment.
Description was accurate and shipping was fast.
Great product so far (yet to put to use). Also probably the best customer service I've ever received!
Totally satisfied with product and deli very
They are not the greatest wuality
It was easy to order and I received it right away.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.