Save Up To 60% on HOT Independence Day Deals!
This high pressure rubber valve stem is snap-in and 1-1/4" long and fits through 0.625" diameter rim holes on trailer wheels.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number AM20907. This is the high pressure rubber snap-in valve stem. It has a maximum pressure of 100 PSI. These tubular snap-in valves for high pressure applications are usually designed for medium and heavy duty trucks and trailers, and must be used when their recommended cold inflation pressure exceeds the 65 PSI. These high pressure snap-in valves that will fit the 0.625 rim hole . which is what this will fit into .. will allow a maximum cold inflation of 100 PSI.
These are typically used in steel wheels high pressure snap-in valves. They combine a thicker rubber snap-in base with the metal barrel, which you can see right here, and the plastic cap that goes over. The effective length of this valve stem, which is measured once it's installed into the wheel . the effective length will be measured from the wheel up to the top here. On this one, the effective length youre looking at about 1 1/4 inch. Again, this fits the rim hole diameter of 0.625.
The wheels that have that size rim hole are usually 16 inches inaudible 00:01:16, because they are used in the medium and heavy duty trucks and trailers. That should do it for the review of part number Am20907, the high pressure rubber snap-in valve stem with the 100 PSI maximum pressure. .
Average Customer Rating: 4.7 out of 5 stars (55 Customer Reviews)
This high pressure rubber valve stem is snap-in and 1-1/4" long and fits through 0.625" diameter rim holes on trailer wheels.
Worked as it should. A “must change” item when replacing your trailer tires…
Haven't had them installed but they look like they will work fine. I going to use them on the Rv with a TPMS system.
I run about 78 psi in my rv tires never had a problem before with the 65 psi valve stem. Recently checked the tires and two of them was low down to 40 psi the rubber had turned lose from the metal tube from the higher pressure was the only thing we could figure happen. luck has it it was in my shop and had not damaged the tires as they were installed in the fall. The shop did not have the 100 psi stem for the bigger rim hole I had saw these on etrailer before an ordered them. Luckiy I was not on the road somewhere. The other two tires did the same thing before I could get them fixed with the new stems. The trailer came with the higher psi but that was 20+ years ago Thanks etrailer. For fast service
They are well made and probably would have worked with steel wheels but didn't work with the aluminum wheels I bought
Worked great but check the hole size in your rim. These require a .625" hole.
I had to use a cone drill with a .626" Dia., then thoroughly deburr both sides.
They installed easily with a stem puller and sealed great.
Works good
Mike - 04/24/2022The wheels were exactly what I needed and wanted for a very good price. The trailer light package was of good quality and for a great price. However, the valve stems ordered were for the wheels and the did not fit because the diameter was too large. I had purchased ones that fit when I had my tires mounted at big O. Over all that was a minor issue and I will gladly depend on etrailer for all my trailer needs. Thanks so much!
Interestingly, these Valve Stems do expire with time. When replacing tires, recommend one also replace the valve stems (Really saves headaches). Original lasted 12 years. Small leaks developed where the brass stem comes out of the rubber. Also, a little sideways pressure on the valve stem can confirm leaks originating at the hole where it comes out of the wheel.
Meh…. It’s a Valve stem. Works as it s hould.
These valves are for larger wheels (be sure to measure your valve stem hole first or call they are very helpful). For 15" or smaller wheels use the 80 psi stem. 663115.
Its a valve stem. It fit the hole. It doesn't leak.
gstrom99 - 04/01/2019Arrived with wheels in a timely way as advertised. Good quality. Will do the trick. Ordering was easy.
This part was not available at my local Auto Parts Stores. Quickly found it at etrailer, made the purchase and it was shipped to my shop with no waiting in line or driving 6 miles in traffic etc. Product is quality. Fast shipping.
Well made, use dish soap before insulti ng
These valves are for 16" and larger wheels - not stated in the description. For 15" or smaller wheels use the 80 psi stem.
Easy to install high pressure valve stem. Works great.
I have been purchasing tires, rims, electric brake units- Great Products- Great company. Thank You Etrailer!
Looks good haven't used them yet.
Just as described. Good quality. Fast shipping. Very good company to work with for trailer purchases/needs.
Just what I wanted great service
Product was received and was as advertised. worked great!
First time buying from etrailer so I did a small purchase to check things out. Couldn't be more happy with the overall experience. Will buy from you again with no reservations.
good product. excellent costumer support. contacted me when part was on back order and provided alternate replacement. fast shipping.
Got them installed and the trailer is road ready
Ordering was easy. Prices were great. Delivery was sooner than expected.
Wayne - 12/25/2017
Do you have a question about this Tire Repair Tool?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.