Counteract Vortex Tire Valve Core

Video Transcript for Counteract Vortex Tire Valve Core Spec Review

Jeff Hello, everybody. This is Jeff at etrailer.com. Today, I'm gonna take a look at this Counteract Vortex Tire Valve Core. Now, this valve core will replace your existing valve core in your valve stem. This valve core is designed for use with the Counteract Balancing Beads that are installed inside your tire. If you notice on this valve core at the very bottom, it has a vortex tip and that's to ensure that nothing but air can enter or exit the valve.

It won't let any of the Counteract Balancing Beads escape from your tire. It does use a nice high-temperature, airtight seal, and it is TPMS safe. This is a TPMS safe valve core. But just to show you how this would install, here's your standard valve stem with the cap on it. Take off your valve cap.

Your valve core is right inside the valve stem, so if you use a valve core removing tool like this one, and then just lock it on there and then unscrew it, and then once you get it all unscrewed, you can pull up. There's your standard valve core, what your standard valve core looks like when you get your valve stem. And then you just take your vortex valve core, drop it into place, take your valve core remover tool, go ahead and tighten it down. And what's nice about this tool, this will actually give you a click or a torque to let you know how tight to tighten your valve core. So once you get it in there, you can see that if you can hear that click, that's tells you it's tight enough, and now you have your new vortex valve core in there.

And you just take your valve cap and put it right back on there. And then to remove it, just again, take your valve core removing tool, put it on there, line it up, and then just unscrew it, and you can remove the valve core just like that. But that should do it for the review on the Counteract Vortex Tire Valve Core..