bing tracking image
  1. Tonneau Cover
  2. BAK Industries
  3. Roll-Up - Hard
  4. Rack Compatible
  5. Flush Profile - Inside Bed Rails
  6. Aluminum and Vinyl
BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black
BAK Industries

BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black

Part Number: BAK39ZR
In Stock
$1,399.99
Tonneau Cover

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

Need help with installation?
Locate installers near me
Weather-resistant, roll-up cover keeps the gear in your truck bed secure and dry. Rolls up quickly by hand for full access to your truck bed. Aluminum slats keep cover tight and help prevent break in. Requires no drilling to install. Great Prices for the best tonneau cover from BAK Industries. BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black part number BAK39ZR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (83)
  • Q & A (0)
  • Photos

BAK Industries Tonneau Cover - BAK39ZR

  • Roll-Up - Hard
  • Rack Compatible
  • Flush Profile - Inside Bed Rails
  • BAK Industries
  • Aluminum and Vinyl
  • Matte
  • Opens at Tailgate

Weather-resistant, roll-up cover keeps the gear in your truck bed secure and dry. Rolls up quickly by hand for full access to your truck bed. Aluminum slats keep cover tight and help prevent break in. Requires no drilling to install.


Features:

  • Roll-up, soft tonneau cover keeps the gear in your truck bed secure and dry
  • Cover rolls up for full truck bed access - secures with hook-and-loop straps and buckles
  • Pinch levers let you easily open cover from either side of truck bed
    • Cover latches shut whether tailgate is open or closed
    • Tailgate lock keeps your gear secure
  • Low-profile cover with textured, matte black finish sits 1-1/2" above the bed rails
  • Double-coated, reinforced vinyl with aluminum bows is sturdy and resists tears
    • Self-tensioning frame keeps the cover taught
  • Weather seals keep out water without need for drain tubes
    • Beveled edges direct water off the sides of cover
  • Easy, clamp-on installation inside truck bed rails - no tools or drilling required
  • Limited lifetime warranty


Specs:

  • Weight capacity: 400 lbs evenly distributed
  • Limited 5-year warranty


Get the advantages of both a hard tonneau cover and a soft tonneau cover for your vehicle with the Revolver X4s. This hybrid tonneau likely has an identity crisis. It's built like a hard cover, but it looks and acts like a soft cover. With the Revolver X4s, you get the strength, durability, and security of a hard tonneau and the sleek look and convenience of a soft, roll-up tonneau - all while protecting your truck bed and cargo and helping to improve your fuel mileage.


The X4s has the features of the original Revolver X4 with upgrades including a matte black aluminum underbody, integrated safety slat caps, rear corner caps, and an integrated bulkhead seal.


Strong, Convenient Hybrid Design

Fully installed coverPartially rolled up cover

The secret to the Revolver X4s's versatility is the aluminum slats on the underside of the cover that make it strong, seamless, and flexible. These individual, hinged slats give the cover its rugged body, while also allowing enough flexibility for the cover to be rolled up. Atop the slats is a tough, 1-piece vinyl layer that adds to the tonneau's sleek look and overall durability while also keeping the slats perfectly aligned. As a result, the Revolver X4s will roll up evenly every time, unlike ordinary soft vinyl covers that can get lopsided as you maneuver them.


Low-Profile Appearance

Cover sits flush for a low-profile appearance

Unlike other tonneau covers that sit 1/2" or more above your truck bed rails, the Revolver X4s sits nearly flush with your rails for a clean, ultra-sleek look.


Full Truck Bed Access

Cover rolled up for full truck bed access

The Revolver X4s gives you full use of your truck bed in a matter of seconds - just roll up the cover and secure it behind the cab. As a result, you can tote around all your gear without having to remove the tonneau. And because the Revolver X4s mounts inside your truck bed rails, you can still use your truck bed stake pockets to mount accessories like tie-down anchors.


Simple, One-Person Operation

Cover is closed and secure

The Revolver X4s is simple to operate. Following installation, just roll the cover out and press down on the rearmost slat at the tailgate to secure the tonneau in place. The built-in latches not only lock down the back end of the tonneau, but they also fasten the sides of the Revolver X4s along the length of the frame rails. The rail tooth runs the entire length of each frame rail. It rotates downward to lock the side rail into the sides of the cover.


Cover is latched closed

When the cover is rolled out and the rear slat is pressed down at the tailgate, the latches on both sides engage. When this happens, the integrated teeth pivot down and rest on top of each slat of the rolled-out cover. Closing the rear slat effectively pins the cover to the rails, ensuring that the cover stays closed from front to back. It's that simple - no Velcro to seal or snaps to wrestle with. When your tailgate is closed and locked, no one will be able to get through the cover, thereby safeguarding your truck bed and its contents. The cover automatically secures as the locking levers at the tailgate engage. These sturdy levers have reinforced gussets that give them added strength and durability. And they will never need adjustment.


Cover unlatched and partially unrolled

To roll up the cover, unlatch the rear slat by dropping the tailgate and pulling either of the 2 release cords located along the bottom corners of the slat's housing. Either cord will release both of the latches so that you can raise the rear slat. When the latches are disengaged, the teeth roll back into the frame rails, releasing the sides of the cover so that you can easily roll it up. Just fold the rear slat over and roll up the cover the rest of the way.


Rolled up cover secured to end of cab by buckle straps - from aboveRolled up cover secured to end of cab by buckle straps - from below

Then secure the tonneau behind the cab with built-in nylon straps and sturdy plastic buckles. These straps help to keep the bundled tonneau from contacting your cab while you drive. And 4 rubber bumpers act as cushioned barriers between the cover and your truck cab.


Heavy-Duty Construction

Heavy-duty, aluminum construction under matte black vinyl

The Revolver X4s's rugged aluminum and vinyl construction makes it an ideal match for your truck, no matter what you do while at work or play. This cover is strong enough to hold up to 400 lbs of evenly distributed weight when it's rolled out. The 1/4" thick, aircraft-grade aluminum slats are covered with a matte black vinyl skin for superior resistance to impacts, UV rays, and weather. This skin is what gives the tonneau its soft, sleek look. While the Revolver X4s may look like a soft cover, its aluminum skeleton provides exceptional security because it cannot be cut through in the same way that a standard soft vinyl cover can be.


Cover lays atop protective felt strips

Felt strips on the underside of the tonneau help to keep the slats from scuffing the vinyl top as you roll up the cover. The soft felt also shields your hands when the cover has gotten hot or cold. And rubber strips overlay your truck's side rails, cab rail, and tailgate, creating a seal that helps to conceal any gaps and works to prevent water from seeping in.


Easy, No-Drill Installation

Clamp-on installation

Installing the Revolver X4s is simple. All you need is a wrench, and you don't have to do any drilling. The tonneau's frame rails clamp to the inside of your truck bed side rails to create a base for the cover. The included bolts secure the front hinge rail to the frame rails at the cab.


Slotted brackets at the ends of the tonneau side rails allow the bolts to shift in case you need to adjust the cover to achieve a snug fit. These brackets ensure proper alignment of the tonneau frame on your truck bed side rails. This eliminates trial and error in installing your rails - you won't have to put them on and then take them off again to get the correct fit. Pre-installed shims and spacers also help to ensure that the Revolver X4s rails are installed squarely on your truck bed.



80329 BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black

Installation Details BAK39ZR Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black - BAK39ZR

Average Customer Rating:  4.5 out of 5 stars   (83 Customer Reviews)

Weather-resistant, roll-up cover keeps the gear in your truck bed secure and dry. Rolls up quickly by hand for full access to your truck bed. Aluminum slats keep cover tight and help prevent break in. Requires no drilling to install.

by:



by:

Purchased this in February. By August this product was already failing. As a roll up tonneau you would expect it to not fail where the cover sits when rolled up but that is exactly what is happening. Photos speak for themselves. I do not recommend you purchase this.

Will be reaching out to customer service today. Will see how how well they support their product.



by:

Looks great. Seems to be good quality. If installing on a Ranger pickup, find ALL of the instructions, including the one in the hardware package that tells you what to do before step 2 of the main instruction sheet.



by:

Customer service from E-Trailer was exceptional as usual big shout out to Cammi F. Thank you for keeping me updated as this was actually delivered from manufacturer.



by:

The original cover was improperly sized from the factory (direct shipment from BAK due to backorder). etrailer, as usual, went above and beyond to get me the correct fitting cover. The new cover fits perfectly and looks great on my truck. Hopefully it will last, though I worry about the quality considering BAK did not notice they sent me a cover with the wrong dimensions originally. Giving 4 stars due to poor QA from the factory on the original shipment.



by:

I decided to spend more money on a secure bed cover about a year ago. This is a very robust cover and I would definitely recommend. It lets a little water in but other than that it has been terrific. The outside cover looks brand new and it locks securely. I would purchase again but it should last longer than I own the truck.



by:

The tonneau cover fits as advertised no leaks it has been a great addition to my truck I really like the way I have my whole bed to use and still have the security of a hard cover without blocking my view out of the rearview mirror for hoking up my fifth wheel trailer.



by:

1 year of use and no regrets. Phenomenal tonneau cover and it was so easy to install I did it in the dark. This is my 2nd truck that I have installed a BAK product on and I am completely satisfied.



by:

it was a hard pill to swallow $1200, but all I can say it was well worth it. A full-time RV with a truck camper so every time I move, I have to roll back the cover, but it’s so easy to do and it is very watertight no water ever and I’ve been through two hurricanes this last year, and my truck bed has stayed dry



by:

Great cover. Easy to install. I like the ability to set objects on top of the topper without worrying about damage. My only dislike would be how hot the components get in the direct FL sun. It could easily burn your hands when rolling the cover up to its retracted position.



by:

Mostly a great cover. I've had this cover on my 2021 Ram 8' bed for 1 year. Install took about 45 minutes. There are 2 issues. After snow or rain and temperatures drop below freezing the cover's locking system along the rails freezes making it very difficult to open or close. You have to go the rails and pull the mechanism free. This year I will try WD 40 prior to the winter season to displace moisture.

2nd, issue two of the hinged supports in the cover separated after being rolled up during a several day trip. One about 3 months ago the second 2 weeks ago.The first one was mostly cosmetic. The second separation would not allow the cover to close without forcing it. I contacted BAK and they quickly opened a warranty claim. After sending them photos and a description of the problem they sent a replacement cover. The 5 year warranty is a pluse. Hopefully this is a one off issue. If I have the issue again I will ask for a different cover.



by:

I had these mirrors (same brand but different model) for my 2016 Silverado and used them for the past 8 years when towing our camper. They installed easily and quickly and were also easy to remove until I needed them again. Since getting a new Silverado I opted for these type of mirrors again. I test fit these new ones and again they go on and off easily. I anticipate them holding up as well as my old ones



by:

I’ve had this for a year now. The good: Very nice product, I recommend it. The rollaway ease is great - quick, easy, compact and reliable during near every day use. Effective watertight (not water proof) seal. Definitely recommend the rugged vinyl of the X4 over the X2.

The not so good: the ribs can get kinked and are hard to work back into position when they do. This was really only an issue during initial install, so just be cautious to avoid letting it bend the wrong way. The plastic end caps on the lock rail can pop off, so I recommend using adhesive to hold them firmly in place.

Overall it’s great. Definitely recommend.



by:

It is still in great working condition looks the same as of the day I received the product besides the pollen and it came off of a 2019 gmc 3500 and it on a 2024 gmc 3500 truck now fits perfectly and no leaks very impressed with that when everyone said it not work not at etrailer. They gave me the thumbs up to try it thanks for your time



by:

This is my second BAK cover. I had the flip before this one. I definitely prefer this roll up style as it is much easier to open/close and not nearly as heavy. It would be 5 stars except for the fact that I have to constantly re-adjust and pull the cover back towards the tail gate. It seems to slide forward a micro amount with each opening. So after a few weeks of opening and closing there is a small gap between the tailgate and cover so I have to move it back to seal the gap. Otherwise love this cover.



by:

I use it for my business and it works with a ladder rack. Only complaint is that the little plastic ends that keep falling off. I drilled and put bolts in them to keep them on.



by:

just arrived today got it installed so far it is just what i was looking for.



by:

I like the low profile the easy install and it keeps everything dry. Still looks great after one year.



by:

Fit is a little tight at the latch end even after removing shims, but overall very nice and sturdy. There was some minor damage to the product when it arrived, but nothing that impacted its function or outward appearance. Much nicer than the Revolver (old name) that I had on my last truck.



by:

Love the streamlined fit and added security of this cover. After one year I experienced the same issues others had reported. The hinges used for rolling the cover came separated and caused the closure of the cover to be extremely difficult. Also started to have the vinyl covering separate from metal frame. Thankfully BAK industry stands by the product and replaced the cover under warranty. New cover was shipped for free and already installed. Not 100% waterproof but acceptable trade off for the added protection of aluminum cover. Hopefully the issues with the hinges have been resolved but still have a 5 year warranty.



by:

This is by far the best tonneau out there and BAK is one of the best companies I have ever dealt with. My cover arrived with a broken plastic corner at the tailgate end, I called BAK and without any questions, they sent me the part I needed and also extra ones for both sides. I couldn't be happier.



by:

Literally the best cover there is on the market. It’s sleet. It’s durable and I get compliments everywhere I go. Thank you etrailer.



by:

I am very happy with the purchase 1 year later. I have a 21 Honda Ridgeline and found the instalation easy. You need to install the included sidewalls to accommodate the ridgeline bed shape and they do create an extra seam, but its not an issue. I can still access the trunk. Works well.



by:

would have given it a 5 star rating ... BUT ...on a VERY windy day in Kansas ... somehow the cover bowed enough to slip out of the latch rail ...very strong side-wind & it was seen floating up & down in my rear view mirror ...I quickly pulled over to secure it! The small rear corner plastic seal was lost and the other later became so warped in the summer heat it was unusable - after an extended period of being in rolled /stowed position! So now I get a wet rear bed liner when I drive through rain & the carwash ... but as my one initial experience with the customer service was not great I have not followed up on trying to get replacement parts! I use black gorilla tape to seal the rear corners! Othe than that -I really like the security for my truck bed contents, the ease of use ease of install and I just double check the latch (& rail alignment) by thumping it upwards each side before closing tailgate ...no more issues with side-winds!



by:

Some of the hardware didn't quite fit, needed to change bolts. Otherwise, excellent. Have now been using it 7 months... love it.


25
83
Show More Reviews

See what our Experts say about this BAK Industries Tonneau Cover

  • BAK Revolver X4s Compatibility With A 2020 Ford F-150 Lariat
    The BAK Revolver X4s Hard Tonneau Cover # BAK39ZR is a compatible fit for a 2020 Ford F-150 with a 5.5' bed so you'll be good to go with this tonneau cover. I've attached a short video below where Evangeline will show you the cover in use and go over the features.
    view full answer...
  • Recommended Tonneau Cover And Ladder Rack Combo For A 2019 Ford F-150 5.5' Bed
    Hey Colin, Both the TruXedo Sentry CT Hard Tonneau Cover # TX1597716 and BAK Revolver X4s Hard Tonneau Cover # BAK39ZR are essentially the same cover with just some minor aesthetic differences. Both operate exactly the same and sit on the bed the same way. If I had to choose between the two I'd go with the TruXedo Sentry CT Hard Tonneau Cover # TX1597716 because it sits closer to the edge of the bedrails so you're not losing extra space for the rails. This cover can be paired with the...
    view full answer...
  • Will the Thule TracRac SR Work with the BAKFlip MX4 on a 2018 Ford F-150 5-1/2 Foot Bed
    I do have some options for you but the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-508 and the BAKFlip MX4 Hard Tonneau Cover part # BAK48329 are not a good fit. The rails on the SR are rather wide so they would likely overlap with the seals on the MX4. In addition to this, you would need to move the rear rack forward in order to fold the cover up each time and with continuous use the seals on the cover will wear out. The only tonneau cover that we know for sure works...
    view full answer...
  • Best Tonneau Cover for Thule TracRac SR Sliding Ladder Rack for a 2020 Ford F-150 5.5 Bed
    The correct Thule TracRac SR Sliding Truck Bed Ladder Rack for a 2020 Ford F-150 with 5-1/2' bed is part # TH43002XT-508. In regards to tonneau cover compatibility, the BAK Revolver X4s Hard Tonneau Cover part # BAK39ZR is the best option as it's super durable and fits perfectly. The Thule TracRac SR Sliding Truck Bed Ladder Rack is only offered in silver.
    view full answer...
  • Best Ladder Rack for Use with BAK Revolver X4s Tonneau Cover for a 2016 Ford F-150 Short Bed
    A tonneau cover and a ladder rack can be compatible with each other on a truck such as your 2016 Ford F-150 short bed as long as they do not require the same mounting point for installation. The best combination that is known to be compatible is the BAK Revolver X4s hard tonneau cover # BAK39ZR and the Thule SR Sliding Ladder Rack # TH43002XT-508. The X4 also works with the 3-bar SR rack # TH43002XT-508EX which includes a 3rd cantilever extension bar for over the cab. The Revolver and...
    view full answer...
  • Can The Thule TracRac Ladder Rack Be Used With A Tonneau Cover On A 2018 Ford F-150
    If you have the Thule TracRac SR # TH43002XT-508, which mounts in the stake pockets of the bedrails instead of clamping to the inner lip then, yes, you can use an inside-the-rails style tonneau cover along with the ladder rack. Since there are so many options with this style of mounting I'd need to know a bit more of what you'd prefer to find the best option for you. That being said, BAK roll-up covers like the BAK Revolver X4s Hard Tonneau Cover # BAK39ZR are the most popular choice...
    view full answer...
  • Thule Ladder Rack and Hard Tonneau Cover for a 2019 Ford F-150 Lariat Crew Cab 5-1/2 Foot Bed
    The Thule TracRac TracONE Truck Bed Ladder Rack # TH27000XT uses clamps to mount to a truck bed so while this ladder rack isn't compatible with a tonneau cover on your 2019 Ford F-150 with the 5-1/2' bed, I do have a different solution for you. If you use the Thule TracRac SR # TH43002XT-508 you can fit the BAK Revolver tonneau cover on your F-150. The TracRac SR is the best ladder rack option for your F-150 because it not only slides along the rails but it also has an impressive 1,250...
    view full answer...
  • Recommended Ladder Rack and Tonneau Cover For 2018 Ford F-150 Crewmax with 5.5 Foot Bed
    Unfortunately with your Ford Tri-fold tonneau, there is not a ladder rack that can be used at the same time because the tonneau rests on top of the side rails. If you don't need to use them at the same time, then you can use any rack from the attached link but it will require removing the tonneau completely to install the ladder rack for each use. If you want to use the tonneau and the ladder rack and the same time, then you can use the Thule TracRac SR Sliding Truck Bed Ladder Rack...
    view full answer...
  • Best Ladder Rack and Tonneau Cover Recommendation for 2018 Ford F-150
    Thule makes TracRac sliding ladder racks that are a fit for your 2018 Ford F-150 which would work well. You'd just need to know the length of your truck bed to pick out the correct part number. If you have a 6-1/2 foot bed you'd want the part # TH43002XT-501, if you have an 8 foot bed you'd want the part # TH43003XT-000, or if you have a 5-1/2 foot bed you'd want the part # TH43002XT-508. There is one tonneau cover that we know fits with the TracRac sliding racks, the Bak Revolver. It...
    view full answer...
  • Recommended Tonneau Cover And Ladder Rack For A 2019 Ford F-150 5.5' Bed
    For your 2019 Ford F-150 with 5.5' bed you'll be able to use the BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black # BAK39ZR along with the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs # TH43002XT-508. The Yakima Overhaul # Y01151-5868 that you were looking at will clamp onto the bedrails so you won't be able to use it with a tonneau cover. The # TH43002XT-508 will mount in the stake pockets of your bedrails allowing you access to clamp the...
    view full answer...
  • Sliding Ladder Rack and Bike Rack for 2018 Ford F-150 Truck Bed
    Thule makes TracRac sliding ladder racks that are a fit for your 2018 Ford F-150 which would work well. You'd just need to know the length of your truck bed to pick out the correct part number. If you have a 6-1/2 foot bed you'd want the part # TH43002XT-501, if you have an 8 foot bed you'd want the part # TH43003XT-000, or if you have a 5-1/2 foot bed you'd want the part # TH43002XT-508. Then for a tailgate mounted bike rack the Softride Shuttle Pad part # SR26457 would fit and work great too.
    view full answer...
  • Recommended Tonneau Cover And Ladder Rack Combo For A 2020 Ford F-150 With 5-1/2 Bed
    The Weekender WG27YV style of ladder racks will mount in the way of the tonneau cover rails so you wouldn't be able to have this style and also be able to use a tonneau cover. Instead I recommend the Adarac Pro Series Custom Truck Bed Ladder Rack # A86RR. This ladder rack mounts in the stake pockets of your bedrails, making it compatible with most tonneau covers that sit inside of the bedrails. If you don't already have a tonneau cover I recommend the BAK Revolver X4s Hard Tonneau Cover...
    view full answer...
  • Recommended Thule TracRac Sliding Rack for 2018 Ford F-150
    The TracRack Sliding Rack is one of the most popular options for a ladder rack because of the compatibility with the BAK Revolution Tonneau cover. This combination works due to the stake pocket mounted sliding rails and the internal bed rail mount for the rolling cover which has low enough clearances to not interfere with the angled rack uprights. If you have the 5-1/2 foot bed you will want the BAK Revolver X4s # BAK39ZR along with the Thule TracRac SR # TH43002XT-508. If you have the...
    view full answer...
  • Fit and Compatibility of Adarac Ladder Rack and BAK Revolver Tonneau Cover for 2019 Ford F-150
    The Adarac Pro Series Custom Truck Bed Ladder Rack, # A86RR is designed to work with inside-the-rail tonneau covers such as the BAK Revolver X4s Hard Tonneau, # BAK39ZR. Yes, these are compatible with each other and are both confirmed to fit your short-bed 2019 Ford F-150. The BAK Revolver, # BAK39ZR is a quality hard tonneau cover with easy, bolt-on installation. The combination of aluminum slats and soft cover provide strength while maintaining flexibility. Pairing this with the Adarac...
    view full answer...
  • Recommended Tonneau Cover and Ladder Rack for a 2020 Ford F-150 5-1/2 Foot Bed
    I have some great options for you to use both a tonneau cover and ladder rack on a 2020 Ford F-150 with 5-1/2' bed. However, the best option for you will come down to what you will be using the ladder rack for, utility (lumber/ladders etc.) or recreational (kayaks/bikes etc.). Also, keep in mind that using a tonneau cover and ladder rack together can be tricky as they both generally occupy the same space therefore you will need to follow the combos that I have listed for you below as these...
    view full answer...
  • Are Thule TracRac SR Ladder Racks Removeable and Compatible with BAK Revolver X4s Tonneau Cover
    Yes, you are correct that the Thule TracRac SR Sliding Ladder Racks are compatible with the BAK Revolver X4s tonneau covers such as # BAK39ZR. And the TracRac SR does allow the uprights to be removed completely from their tracks or moved to your desired positions for specific cargo needs. The TracRacs for your 5-1/2-foot bed 2018 F-150 are the standard 2-bar system # TH43002XT-508 and the 3-bar system that includes an over-the-cab cantilever # TH43002XT-508EX. Both have a 1250-lb weight...
    view full answer...
  • Ladder Rack and Tonneau Cover Recommendation for 2018 Ford F-150 5-1/2 ft Bed
    You are on the right track. The only way to fit a tonneau cover and ladder rack in a truck like your 2018 Ford F-150 5-1/2 foot bed will be a Sliding Thule TracRac # TH43002XT-508 plus a BAK Revolver part # BAK39ZR. I attached a picture that I took from the install instructions that shows how the rails attach to the stake pockets for you to check out.
    view full answer...
    Image 1 for
  • Will the RetraxPRO Tonneau Cover for 2019 F-150 5.5 Bed Work With Sliding Cargo Drawer Tray
    The RetraxPRO XR Hard Tonneau Cover part # RTT-80373 which is a fit for a 2019 Ford F-150 will sit about 11"-12" down inside the truck bed. If the canister will not clear the tray, I recommend the BAK Revolver X4s Hard Tonneau Cover part # BAK39ZR as a very durable alternate.
    view full answer...
  • Recommended Tonneau Cover and Ladder Rack for 2018 Ford F-150 for Rooftop Tent
    For your 2018 Ford F-150, the BAK Revolver # BAK39328 for an 8 foot bed is an excellent choice for accessibility and function. Unfortunately there is not a rack that is available that is below cab height that will also work with the tonneau cover to allow you to utilize both. You would either be too low to roll the cover or above the cab. We have found the best system with this tonneau to be the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs # TH43003XT-000 which is a fit...
    view full answer...
  • Sliding Ladder Rack and Tonneau Cover Recommendation for 2018 Ford F-150 5.5 ft Bed
    Thule does have a sliding TracRac SR ladder rack that fits your 2018 Ford F-150 with a 5-1/2 foot bed. For that you'd want the part # TH43002XT-508 and you'd be set! If you also wanted a tonneau cover for your truck that is compatible with the ladder rack you'd want the part # BAK39ZR from BAK as the Revolver is the only cover available that fits with the TracRac.
    view full answer...

Do you have a question about this Tonneau Cover?


Info for this part was:

Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Written by:
Matthew S
Employee Daron K
Edited by:
Daron K
Employee John S
Video by:
John S
Employee Evangeline M
Installed by:
Evangeline M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.