To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.
Features:
Specs:
The Switchblade retractable hard tonneau cover provides you with security and weather protection for your truck bed, easy accessibility to your cargo, and the flexibility to haul large items that require full bed capacity whenever needed. You can install the cover without assistance in approximately 10 minutes, and you can completely remove it from your vehicle's bed just as quickly. The tonneau deck is constructed of a vinyl fabric top sheet that is bonded to rigid aluminum panels, combining the seamless appearance of a soft cover with the security features of a hard cover.
Simple, 1-Person Installation
To install the cover, set the canister on the bulkhead of your truck. Make sure that it's square with your bed. Bolt the side rails to the tabs on the canister.
Secure the rails to your truck bed side rails using 2 clamps per side. Slide the clamp onto the rail, flip the pivot arm up so it is under the bed rail lip, and tighten the clamp in place with the twist knob. Shims are included for trucks with tapered beds.
Each clamp at the tailgate end of the rails has a supplemental kickstand to help level the rails and prevent overtightening during installation. To install the kickstand, simply slide it into the grip handle at the bottom of the clamp. Rotate the kickstand so the foot rests squarely against the side wall of the truck bed, and tighten in place.
Mount the top cover plate to the canister with the included hardware. Attach the drain tubes to the canister and route each tube out of the OEM drain holes in the floor of your bed.
To hold the pull strap off the floor of your truck bed, apply the adhesive hook-and-loop fastener strip onto the underside of a rail at your desired location.
Remove or Reinstall in 10 Minutes
After the initial installation, the tonneau cover can be completely removed or reinstalled in approximately 10 minutes. The Switchblade is great for whenever you need to haul large items that require full bed capacity from front to back and side to side. After your large haul is complete, you can easily reinstall the cover to protect your truck bed again.
To utilize your entire truck bed, detach the canister from the side rails by removing the bolts on either side with a wrench. Then take the side rails off your truck by removing the clamps with the same wrench. Wrap the pull-strap around the canister and use it to lift the canister off your vehicle.
Retractable Cover with Built-In Pull Strap
To retract the Switchblade, simply squeeze the pinch grips located underneath the cover near the center of the tailgate to activate a heavy-duty tension spring. The spring automatically retracts the cover into the canister at the bulkhead of your truck bed. This provides quicker, easier access to your truck bed when compared with manual retractable covers that have no spring-loaded assist.
A built-in pull strap helps you extend the cover over your bed. As you pull, the tonneau will glide smoothly along tracks in the side rails until it reaches the tailgate and secures in place. You can also use the rear plate of the tonneau cover to pull it closed.
Compact, Angled Canister
The cover retracts into a canister located at the front of your truck bed, giving you unrestricted visibility out of your rear window. The canister also protects the stored cover from the elements. And the compact, angled design allows for maximum clearance for your tools and cargo.
Water Management System
The Switchblade rails feature a water management system that channels excess water into the canister. This prevents water from getting into your bed or freezing in your tonneau cover rails during cold temperatures. Drain tubes attached to the bottom of the canister remove water through the OE drain holes in the floor of your truck bed.
Flush-Mount Design
The black powder-coated side rails sit 1/8" above your truck bed rails for a flush appearance. This low-profile design is aerodynamic to reduce wind drag, and it helps to improve gas mileage when the cover is closed.
Stylish and Heavy-Duty Construction
The Switchblade deck is constructed of a vinyl top layer bonded to heavy-duty aluminum slats. This ArmorTek deck looks like a soft tonneau cover with no visible seams, but has the strength and security of a hard tonneau cover. A large seal at the rear of the bed closes the gap between the cover and tailgate to create a barrier to prevent water from entering the truck bed.
Security
The Switchblade provides excellent protection for your cargo when used in conjunction with a closed and locked tailgate. Both the pinch grips and pull strap are located underneath the rear plate, which makes them inaccessible when your truck bed is closed. The heavy-gauge aluminum panels are better at preventing theft when compared with soft covers that can be cut or punctured with a knife. The panels are also more effective at preventing theft than tri-fold hard tonneau covers because the panels cannot be pried open at any point along the rails.
California residents: click here
Average Customer Rating: 4.4 out of 5 stars (289 Customer Reviews)
You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.After searching for a bed cover I came back to etrailer because of the service and quality of my 5th wheel hitch that I purchased from them when I bought my new truck. I received my new bed cover and it is awesome just as described and fit perfect and took about 30 min to install it. etrailer is the place to buy all your truck or trailer needs . As you can see from the pictures it covers up my diesel tank and the 5th wheel hitch when not in use and when you pull the 5th wheel then just roll in into the canaster.
I had thought about buying this exact tanhoe cover when I purchased my truck last November but didn't. A month later I wished that I had! I looked all over for this cover and couldn't find it. Then a about a week ago etrailer sent me a message saying that I might be interested in this tanhoe cover! I purchased it immediately and got it exactly when they said I would. It's the BEST purchase I've made! 15 minutes to install and works perfectly! Love it! Thank you so much for the recommendation!
Someone tried to break into the first one I had and although the vinyl was damaged they weren't able to get into the bed of my truck. I ordered another and it's on my truck looking good and keeping it secure.
Item was damaged in shipping and after contacting etrailer twice they finally reached out to me with a sorry but what would you like me to do about it attitude…. I was able to straighten out the bent frame with a hammer and piece of wood… etrailer please train your shipping department on how to pack a roll up bed cover!
It's a great cover no complaints
Pros: The looks and operation are great. I don’t think there is a better looking cover.
Cons: It leaks like crazy. It is not designed for a bed with plastic rail covers. My Denali HD comes with plastic rails as do most trucks. So you have to use some foam weather stripping in an attempt to seal. The foam helps however it appears it leaks from multiple places. The rubber flange seal on the cover split within a month of installing.
The cover is nice except for when it rains. If you are looking to get a cover that will keep your bed dry this is not the one.
David B.
9/15/2022
Anthony, these are weather resistant not water proof. So some waterdebridust may get in at some point. HOWEVER if it is a large amount then I would check your seals and make sure that the proper adhesives and gaskets are used and that you clean and sandpaper the mounting areas if they have any bed liner or plastics so you will get a better seal.
Love it! It takes the hassle out of loading large objects and features security for the things in the bed.
Cover has held up well after a year of use. However it gets tricky in the winter months when it can freeze.
Scott
2/2/2023
Switchblade cover works great. Was easy to install. Was concerned about it working well in snow and ice. Works great. Wish the drain tube attached better to canister. They have come undone a couple of times and are kind of a pain to reattach. All in all very happy, good product.
William
3/25/2022
The cover works real well In all aspects I have ut On my 2018 2500 duramax but after about the 7th month the small stainless screws came out of the latch mechanism on the side rails and is impossible to roll cover out without losing latch mechanism on each side.
Very easy directions to follow. It didn't take long to install. It works very well.
HIGH QUALITY!
Excellent product very easy to install fits my F350 perfectly
E Trailer has great customer service I would recommend this product to anyone who is looking for a retractable tonneau cover
Great fit for an eight foot bed. The Pace Edwards switchblade retractable bed cover was easy to install and adjust. This cover allows you to store items in your bed and still retract without blocking your rear window or folding in on your stuff in the bed. Very low profile cover.
Packaging was great, haven’t installed yet my truck is in for service.
Went through directions and all parts seem to be there.
Installation was simple. Although the canister supports seemed very flimsy. Cover worked well for the first few months at some point it became more difficult to retract the cover all the way into the canister. Now at one year the spring seems to have lost all its tension. Tried to contact P/E to find out if there was a way to fix it. No response yet.
Within three months the seals along the rails warped in the sun making it nearly impossible to slide the cover open or closed. I have upgraded my cover to a Bakflip MX4. I can’t share photos because I discarded the whole cover.
The Pace Edwards Switchblade has performed well after a year. It's still holding up and is a great way to protect your bed and belongings. I use a slider hitch from Pull-Rite to tow and as long as the upper hitch plate is removed there is absolutely no interference. Also the cover does NOT interfere with towing when it's retracted. I would buy this again and recommend it for its durability and good looks.
The cover looks great and DOES work on a 2020 Ram 3500 8'bed. It was easy to install. It was missing 2 hex bolts to connect the rails to the canister but a few dollars at the local hardware store fixed that. The only concern I have is the canister cover is a little warped, either from shipping or manufacturing, allowing the cover to retract in the canister without touching the brush on the canister cover. This could allow dirt and dust into the canister later as well. All in all great looking cover that does what its intended to do.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
9/23/2022
I apologize that your contact with us was not handled appropriately. Customer service will reach out to you.